Menu

Hook Type Cable Sheaves 4000 lbs.

  • 4,000 lb. capacity
  • Forged steel hooks with 1’’ opening
  • Welded steel frames
  • 5” wide aluminum sheaves with self-lubricating bearings

Hook Type Cable Sheaves 8000 lbs.

  • 8,000 lb. capacity
  • Strong, welded steel frames
  • Forged steel closure type hooks with 1.000 IN (25.400 MM) opening
  • All three sheaves are aluminum alloy with self-lubricating bearings

Right Angle Twin Yoke Sheave

  • Strong welded steel yokes
  • Forged steel closure type hook with 1-Inch (25.4 mm) opening
  • 5-Inch (127 mm) wide aluminum alloy sheave with self-lubricating bearings
  • Yokes rotate independently to fit various setups
  • Use with any cable puller whose maximum pulling force is 4000-Pound or less

Triangle Sheave Cable Guide

  • Adjustable center sheave for 19-1/2 IN (495 mm) or 36 IN (914 mm) radius
  • Forged steel closure type hook with 1-1/2 IN (38.1 mm) opening
  • Aluminum frames for light weight
  • Steel yoke is pinned for easy removal
  • 21-7/8 IN (555 mm) high, 24 IN (610 mm) long, 7-3/8 IN (187 mm) wide with 5 IN (127 mm) wide sheaves
  • Use with any cable puller whose maximum pulling forceis 6,500 lbs. (28.9 kN) or less

Cable Feeding Sheaves

  • Yoke frame slides into the end of conduit and holds sheave, allowing the cable being fed into the conduit to smoothly roll over the sheave
  • 5.000 IN (127.000 MM) wide aluminum alloy sheave with self-Lubricating bearings
  • Split tube for easy removal after cable is installed

Radius Sheaves

  • Welded steel frame with a series of sheaves to form a large radius
  • Yokes with cast steel closure-type hooks with a 1 IN (25.4 mm) opening
  • 5 IN (127 mm) wide aluminum alloy sheaves
  • Use with any cable puller whose maximum pulling force is 4,000 lbs.(17.8 kN) or less

Tray Type Sheaves

  • Steel frame easily attaches to cable tray up to 2" (50.800 MM) thick helps roll and guide tray pulls helps roll and guide tray pulls
  • Make tray pulls easier
  • 5" (127.000 MM) wide aluminum alloy sheaves with self lubricating bearings