BB651C Asphalt Paver


Tractor Weight 22729.63 lb 10310.0 kg Less
Operating Weight (with Extend-A-Mat 8-16B Screed) 31966.99 lb 14500.0 kg Less
Operating Weight with Screed 31966.99 lb 14500.0 kg Less

Operating Specifications

Paving Width Minimum 8.2 ft 2500.0 mm Less
Paving Width Maximum 19.68 ft 6000.0 mm Less


Gross Power 94.0 hp 70.0 kW Less
Engine Model Deutz F5L 914 Deutz F5L 914 Less


Track Contact Length 7.68 ft 2.34 m Less
Length with push roller & Extend-a-Mat B Screed 17.91 ft 5460.0 mm Less
Overall height 11.65 ft 3550.0 mm Less
Transport width (hoppers raised) with end gates with Extend-A-Mat B Screed 8.2 ft 2500.0 mm Less
Transport height (muffler removed) 8.2 ft 2500.0 mm Less

Service Refill Capacities

Fuel Tank Capacity 36.98 gal 140.0 L Less
Hydraulic Oil Tank 40.95 gal 155.0 L Less
Cooling System 7.93 gal 30.0 L Less

Drive System

Maximum Paving Speed 104.99 ft/min 32.0 m/min Less
Maximum Travel Speed 2.8 mph 4.5 km/h Less


Hopper Capacity 370.8 ft3 10.5 m3 Less


Machine fitted with two steel tracks and rubber shoe pads. Track tension is assured by a grease piston with a shock absorbing system.


Two hydrostatic transmissions are each fitted with a variable displacement pump feeding fixed displacement axial piston motors directly splined to a two speed gearbox. Planetary final reduction gears in oil bath. An electro-hydraulic servo-control consents machine starting and stopping (for asphalt supply, etc.) with no pre-set working speed variation. Machine steering is operated by a steering wheel that controls the variable displacement pumps electric servo-controls. This system guarantees a precise speed and direction.

Screed RB 4650

Consists of two central fixed plates and two lateral mobile plates, hydraulically operated, sliding on two chromed telescopic cylindrical guides. The screed plate axis allows modifications of shapes (V W ) with different camber angles between +4.5% and -2.5%. Other adjustments allow tamper travel position to be corrected due to wear. Whenever the paver stops during work operations (for asphalt supply, etc.) the pistons lifting the screed automatically block. These pistons prevent the screed from leaving marks on the mat. The smoothing plates, made from wear resisting indeformable steel, are heated by eight LPG burners. The screed is fitted with electronic ignition and automatic adjustment of the smoothing plate temperature.

Screed Assist

The screed is equipped with an electro-hydraulic device maintaining a constant screed pressure on the bituminous mix, independently from the mix bearing capacity and the paving width. It is also possible to transfer part of the screed weight to the tracks of the machine, thus increasing machine traction.


The hydrostatic drive acts as the service brake; the safety and parking brakes are mechanical multi-disk brakes with negative hydraulic control.

Driving Position and Controls

Fitted with two sliding platforms. Each platform is equipped with an adjustable sliding seat. The console panel, fully equipped with main operating controls and warning lights, can be positioned in both driving positions consenting an excellent view from both sides.

Hopper and Feeding System

The independent movement of the two side wings is obtained by means of two hydraulic cylinders. The bottom plate of the hopper is built of abrasion-proof steel. Two conveyors, made of wear-resisting steel, are independently controlled. Two automatic stop feed devices control conveyors operation. Material conveyed to both sides is spread by two independently controlled augers. Rotation speed can be varied automatically to ensure a homogeneous distribution of material before the screed. Two ultrasonic wave detectors control proportional auger movement. Augers height can be adjusted hydraulically. A pair of auger extensions are supplied with the machine.

Electric System

24 V system with 2 batteries 100 A.h.. Complete lighting system for work and travel.

On Request

- Folding canopy - Automatic levelling devices: - Grade control - mechanical - Combined ultrasound grade control - electronic and mechanical - Digital ultrasound grade control - 5 ultrasound sensors - Slope control - Digital slope control - Long sliding ski 6 m for grade control - Auto-levelling ski 6 m for grade control - Mechanical extension 3 m for auto-levelling ski - Mechanical extension elements with tamper and auger extensions for paving widths up to 6 m - Mechanical extension elements with tamper for paving widths up to 5.15 m - Burners electronic ignition with automatic adjustment of extension boxes plate temperature for paving widths up to 6 m - Reversible augers - Rotating side screed bulkheads - Motorized camber adjustment - Emergency drive kit - Biodegradeable hydraulic oil.

Customer Stories

Discover what’s new and how customers like you are benefiting from our products and services. Check back often for updates.

Learn More

Looking for that perfect piece of used equipment to complement your fleet? Check out our Used Exclusives, featuring new machines every week!

Learn More

Let’s talk. Connect with us on one of our social channels to start the conversation and see what we’re up to.

Learn More
Branch Locator

Looking for your nearest branch? Get in touch with us today by contacting one of our branches directly. We’re always ready to help.

Learn More

When you choose Finning, you have a wide array of support and specialty services to help you get the most from your equipment.

Learn More

Integrated technology can help you understand your equipment's output and help extend its lifespan.

Learn More

Choose from a range of financing solutions that allow you to purchase equipment, parts, services, and technology when you need it.

Learn More

Please share your feedback on!

Close window

We are committed to providing you with the best site experience possible.  Please take our brief survey to tell us how we are doing.

Thank you in advance for your time!