Menu

Back


View Product Downloads

335F L Standard Equipment

ENGINE
  • Cat C7.1 diesel engine: – Biodiesel capable – Meets Tier 4 Final emission standards – Standard, economy, and high power modes
  • Automatic engine speed control
  • Automatic engine idle shutdown
  • Three-stage fuel filtration system with water separator and indicator
  • 4600 m (15,000 ft) altitude capability
  • 52° C (126° F) high ambient cooling capability
  • 115 amp alternator
  • Radial seal air filter with double filter element
  • Electric fuel priming pump

HYDRAULIC SYSTEM
  • Electric boom regeneration circuit
  • Stick regeneration circuit
  • One-touch lifting mode
  • Automatic two-speed travel
  • Boom and stick drift reduction valve
  • Reverse swing damping valve
  • High-performance hydraulic return filter

CAB
  • Openable skylight as emergency exit
  • Openable laminated front upper windshield with assist device
  • Removable tempered lower windshield with in-cab storage bracket
  • Fully adjustable seat, console and armrest
  • 51 mm (2 in) width seat belt
  • Full graphic 178 mm (7 inch) LCD monitor, with distortion-free rearview camera picture
  • Automatic bi-level air conditioner with pressurized function
  • 12V × 2 power supply with sockets
  • Washable floor mat

UNDERCARRIAGE AND STRUCTURES
  • HD track rollers
  • Grease lubricated track link
  • Tie down points on base frame
  • HD bottom guard

ELECTRICAL
  • Maintenance-free battery
  • Centralized electrical disconnect switch
  • Programmable time delay working lights

SERVICE AND MAINTENANCE
  • Grouped oil, fuel, and hydraulic oil filters for ease of maintenance
  • Sampling ports for Scheduled Oil Sampling (S·O·SSM)
  • Air-to-air aftercooler (ATAAC) and fixed-type A/C condenser

SAFETY AND SECURITY
  • Rearview camera with three mirrors
  • Hand rail mirror for right rear view
  • RH hand rail and hand hold
  • Bolt-free service platform with anti-skid plate
  • Neutral lever for all controls
  • Ground-level-accessible secondary engine shutoff switch in cab
  • Signaling/warning horn
  • Safety hammer for cab evacuation

335F L Optional Equipment

CAB
  • 24V AM/FM radio with AUX input
  • High back seat with air suspension, seat heater and head rest
  • High back seat with air suspension, seat heater/cooler and head rest

FRONT LINKAGE
  • CB2 bucket linkage without lifting eye
  • R2.65CB2 (8'8") stick
  • R3.2CB2 (10'6") stick
  • R3.75CB2 (12'4") stick

HYDRAULICS
  • Boom and stick lines
  • High-pressure lines
  • Tool control system
  • Quick coupler arrangement
  • Medium pressure lines
  • Two-way control pattern changer

SECURITY
  • Vandal guards
  • Track guiding guards

UNDERCARRIAGE
  • 600 mm (24 in) triple grouser shoes
  • 850 mm (33 in) triple grouser shoes

MISCELLANEOUS
  • Cold weather lubricants
  • Air cleaner with pre-cleaner
  • Dozer blade (3200 mm/10'6")
  • Boom and stick lowering check valves

Overview

If your business calls for a tool-carrying machine that can take on several tight-quarter tasks like loading trucks without swinging into traffic, picking and placing heavy materials, and even taking down structures to make way for progress, you need the versatile Cat 335F L in your fleet. In this size class, there simply isn't anything like it. In fact, it's in a class of its own.

Engine

Units:
Engine Model Cat® C7.1 ACERT™ Cat® C7.1 ACERT™ Less
Net Flywheel Power 200.0 mm H2O 149.0 kg/mm Less
Bore 4.13 in 105.0 mm Less
Stroke 5.31 in 135.0 mm Less
Displacement 428.0 in³ 7.01 l Less
Gross Power 204.0 mm H2O 152.0 kg/mm Less
Net Power - SAE J1349 200.0 mm H2O 149.0 kg/mm Less

Weights

Operating Weight 81315.0 lb 36884.0 null Less
Maximum Operating Weight** 81315.0 lb 36884.0 null Less
Minimum Operating Weight* 75694.0 lb 34334.0 null Less
Note (1) *Long undercarriage, 600 mm (24 in) TG track, reach boom, R2.65CB2 (8'8") stick, CB2 bucket linkage and CB1233HD 1.3 m3 (1.7 yd3) bucket. *Long undercarriage, 600 mm (24 in) TG track, reach boom, R2.65CB2 (8'8") stick, CB2 bucket linkage and CB1233HD 1.3 m3 (1.7 yd3) bucket. Less
Note (2) **Long undercarriage, 600 mm (24 in) TG track, blade, reach boom, R3.75 m (12'4") stick, CB2 bucket linkage, CB1350HD 1.54 m3 (2.01 yd3) bucket. **Long undercarriage, 600 mm (24 in) TG track, blade, reach boom, R3.75 m (12'4") stick, CB2 bucket linkage, CB1350HD 1.54 m3 (2.01 yd3) bucket. Less

Service Refill Capacities

Fuel Tank Capacity 101.7 gal (US) 385.0 l Less
Cooling System 7.9 gal (US) 30.0 l Less
Engine Oil 6.3 gal (US) 24.0 l Less
Final Drive - Each 2.1 gal (US) 8.0 l Less
Hydraulic System - Including Tank 76.6 gal (US) 290.0 l Less
Hydraulic Tank 40.7 gal (US) 154.0 l Less
DEF Tank 6.1 gal (US) 23.0 l Less
Swing Drive - Each 2.4 gal (US) 9.0 l Less

Swing Mechanism

Swing Speed 9.9 r/min 9.9 r/min Less
Swing Torque 60628.0 ft-lb 82.2 null Less

Drive

Maximum Drawbar Pull 66319.0 lbf 295.0 kN Less
Maximum Travel Speed 4.2/2.6 km/h (2.6/1.6 mph) 4.2/2.6 km/h (2.6/1.6 mph) Less
Maximum Drawbar Pull - Long Undercarriage 66319.0 lbf 295.0 kN Less

Hydraulic System

Boom Cylinder - Bore 5.5 in 140.0 mm Less
Boom Cylinder - Stroke 55.4 in 1407.0 mm Less
Bucket Cylinder (CB) - Bore 5.9 in 150.0 mm Less
Bucket Cylinder (CB) - Stroke 45.3 in 1151.0 mm Less
Main System - Implement × 2 pumps 65.1 gal/min 246.6 l/min Less
Main System - Maximum Flow - Total 130.2 gal/min 493.2 l/min Less
Maximum Pressure - Equipment - Normal 5076.0 psi 35000.0 kPa Less
Maximum Pressure - Heavy Lift 5512.0 psi 38000.0 kPa Less
Maximum Pressure - Swing 3974.0 psi 27400.0 kPa Less
Maximum Pressure - Travel 5366.0 psi 37000.0 kPa Less
Pilot System - Maximum Flow 7.9 gal/min 30.0 l/min Less
Pilot System - Maximum Pressure 595.0 psi 4100.0 kPa Less
Stick Cylinder - Bore 5.9 in 150.0 mm Less
Stick Cylinder - Stroke 64.8 in 1646.0 mm Less
Swing System - Maximum Flow No swing pump No swing pump Less

Sound Performance

ISO 6395 - Exterior 104.0 dB 104.0 dB Less
ISO 6396 - Inside Cab 72.0 dB 72.0 dB Less
Note (1) When properly installed and maintained, the cab offered by Caterpillar, when tested with doors and windows closed according to ANSI/SAE J1166OCT98, meets OSHA and MSHA requirements for operator sound exposure limits in effect at time of manufacture. When properly installed and maintained, the cab offered by Caterpillar, when tested with doors and windows closed according to ANSI/SAE J1166OCT98, meets OSHA and MSHA requirements for operator sound exposure limits in effect at time of manufacture. Less
Note (2) Hearing protection may be needed when operating with an open operator station and cab (when not properly maintained or doors/ windows open) for extended periods or in a noisy environment. Hearing protection may be needed when operating with an open operator station and cab (when not properly maintained or doors/ windows open) for extended periods or in a noisy environment. Less

Standards

Brakes ISO 10265 2008 ISO 10265 2008 Less
Cab/FOGS ISO 10262 1998 ISO 10262 1998 Less
Cab - ROPS ISO 12117-2 2008 ISO 12117-2 2008 Less

Track

Number of Shoes - Each Side - Long Undercarriage 49 49 Less
Optional for Long Undercarriage 24.0 in 600.0 mm Less
Standard with Long Undercarriage 33.0 in 850.0 mm Less
Number of Carrier Rollers - Each Side 2 2 Less
Number of Track Rollers - Each Side - Long Undercarriage 9 9 Less

Compact Radius

Compact Radius

Compact Radius

Integrated Technologies

Integrated Technologies

Hydraulics

Hydraulics

Hydraulics

Hydraulics

Hydraulics

Engine

Engine

Engine

Engine

Engine

Engine

Engine

Engine

Engine

Engine

Engine

Operator Station

Operator Station

Operator Station

Operator Station

Operator Station

Operator Station

Front Linkage

Front Linkage

Front Linkage

Front Linkage

Structures and Undercarriage

Structures and Undercarriage

Structures and Undercarriage

Attachments

Attachments

Attachments

Attachments

Attachments

Attachments

Attachments

Serviceability

Serviceability

Serviceability

Serviceability

Safety

Safety

Safety

Safety

Complete Customer Care

Complete Customer Care

Complete Customer Care

Complete Customer Care

Complete Customer Care

Complete Customer Care

Sustainability

Customer Stories

Discover what’s new and how customers like you are benefiting from our products and services. Check back often for updates.

Learn More
Promotions

Looking for that perfect piece of used equipment to complement your fleet? Check out our Used Exclusives, featuring new machines every week!

Learn More
Social

Let’s talk. Connect with us on one of our social channels to start the conversation and see what we’re up to.

Learn More
Branch Locator

Looking for your nearest branch? Get in touch with us today by contacting one of our branches directly. We’re always ready to help.

Learn More
Services

When you choose Finning, you have a wide array of support and specialty services to help you get the most from your equipment.

Learn More
Technology

Integrated technology can help you understand your equipment's output and help extend its lifespan.

Learn More
Finance

Choose from a range of financing solutions that allow you to purchase equipment, parts, services, and technology when you need it.

Learn More

Please share your feedback on Finning.com!

Close window

We are committed to providing you with the best site experience possible.  Please take our brief survey to tell us how we are doing.

Thank you in advance for your time!