Menu

Back


View Product Downloads

Overview

Save money and transport time with one rugged machine for land clearing, digging, grading, truck loading, slope work and more. Crawler loaders give you reduced ground pressure and better traction so you can start the job earlier and work longer in soft underfoot conditions. Purpose-built Waste Handler, Ship Hold and Partial Steel Mill configurations stand up to the toughest applications. This new generation of Cat® Track Loaders brings you all of this, plus improved performance and fuel efficiency.
For complete machine specifications and available configurations, please see your Cat dealer or visit www.cat.com.

Engine

Units:
Flywheel Power 193.0 hp 144.0 kW Less
Engine Model Cat C7.1 ACERT Cat C7.1 ACERT Less
Net Power – ISO 9249/SAE J1349 193.0 hp 144.0 kW Less
Net Power – ISO 9249/SAE J1349 (DIN) 196.0 hp 144.0 kW Less
Emissions U.S. EPA Tier 4 Final/EU Stage IV, China Nonroad Stage III, equivalent to Tier 3/Stage IIIA U.S. EPA Tier 4 Final/EU Stage IV, China Nonroad Stage III, equivalent to Tier 3/Stage IIIA Less
Note All nonroad Tier 4 Interim and Final, Stage IIIB and IV and Korea Tier 4 Final diesel engines are required to use only Ultra Low Sulfur Diesel (ULSD) with 15 ppm (mg/kg) of sulfur or less, or up to B20 biodiesel blended with ULSD. B20 should meet ASTM D7467 specification (biodiesel blend stock should meet Cat biodiesel spec, ASTM D6751 or EN 14214). Cat DEO-ULS™ or oils that meet the Cat ECF-3, API CJ-4, and ACEA E9 specification are required. Consult your OMM for further machine specific fuel recommendations. All nonroad Tier 4 Interim and Final, Stage IIIB and IV and Korea Tier 4 Final diesel engines are required to use only Ultra Low Sulfur Diesel (ULSD) with 15 ppm (mg/kg) of sulfur or less, or up to B20 biodiesel blended with ULSD. B20 should meet ASTM D7467 specification (biodiesel blend stock should meet Cat biodiesel spec, ASTM D6751 or EN 14214). Cat DEO-ULS™ or oils that meet the Cat ECF-3, API CJ-4, and ACEA E9 specification are required. Consult your OMM for further machine specific fuel recommendations. Less
Note Diesel Exhaust Fluid (DEF) used in Cat Selective Catalytic Reduction (SCR) systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241. Diesel Exhaust Fluid (DEF) used in Cat Selective Catalytic Reduction (SCR) systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241. Less

Undercarriage

Track on Ground 100.0 in 2542.0 mm Less
Track Gauge 72.8 in 1850.0 mm Less
Track Shoe Width – Standard 22.0 in 550.0 mm Less
Track Shoe Width – Optional 18.0 in 450.0 mm Less
Track Rollers/Shoes – Each Side 7/38 7/38 Less
Ground Contact Area – Standard Shoe 4900.0 in2 3.2 m2 Less
Ground Contact Area – Optional Shoe 4013.0 in2 2.6 m2 Less
Ground Pressure(1) – Standard Shoe 9.1 psi 62.9 kPa Less
Ground Pressure(1) – Optional Shoe 11.1 psi 76.9 kPa Less
Ground Pressure – Standard Shoe 9.0 psi 62.0 kPa Less
Ground Pressure – Optional Shoe 11.0 psi 75.8 kPa Less
Grouser Height – Double Grouser 1.65 in 42.0 mm Less
Note (1) Machine equipped with Tier 4 Final/Stage IV emissions reduction technology. (1) Machine equipped with Tier 4 Final/Stage IV emissions reduction technology. Less

Service Refill Capacities

Fuel Tank 84.5 gal 320.0 L Less
DEF Tank(1) 4.22 gal 16.0 L Less
Note (1) Machine equipped with Tier 4 Final/Stage IV emissions reduction technology. (1) Machine equipped with Tier 4 Final/Stage IV emissions reduction technology. Less

Weights

Operating Weight 44138.0 lb 20021.0 kg Less
Operating Weight(1) 44771.0 lb 20308.0 kg Less
Note (1) Machine equipped with Tier 4 Final/Stage IV emissions reduction technology. (1) Machine equipped with Tier 4 Final/Stage IV emissions reduction technology. Less

Buckets

Capacity – General Purpose 3.2 yd3 2.5 m3 Less
Capacity – Performance Series 3.7 yd3 2.8 m3 Less
Capacity – Multi-Purpose 2.6 yd3 2.0 m3 Less
Width – General Purpose 102.8 in 2612.0 mm Less
Width – Performance Series 106.8 in 2712.0 mm Less
Width – Multi-Purpose 101.3 in 2575.0 mm Less

Dimensions

Overall Machine Width/Without Bucket/Standard Tracks – 550 mm (21.6 in) Shoes 94.5 in 2400.0 mm Less
Ground Clearance 18.5 in 471.0 mm Less
Machine Height to Top of Cab 130.9 in 3325.0 mm Less
Overall Machine Length* 275.6 in 7001.0 mm Less
Carry Position Approach Angle 15° 15° Less
Digging Depth* 5.4 in 138.0 mm Less
Maximum Rollback at Ground/Carry Position 43°/50° 43°/50° Less
Bucket Height in Carry Position 18.0 in 457.0 mm Less
Reach at Full Lift Height and 45° Dump* 54.0 in 1373.0 mm Less
Clearance at Full Lift Height and 45° Dump* 114.8 in 2915.0 mm Less
Maximum Rollback/Dump, Fully Raised 52°/53° 52°/53° Less
Grading Angle 63° 63° Less
Height to Bucket Hinge Pin 155.1 in 3940.0 mm Less
Overall Machine Height, Bucket Fully Raised 212.7 in 5402.0 mm Less
Height to Top of Stack 115.7 in 2940.0 mm Less
Ramp Angle 29° 29° Less
Note *With General Purpose bucket and extra duty teeth. *With General Purpose bucket and extra duty teeth. Less

Air Conditioning System

Air Conditioning The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.1 kg of refrigerant which has a CO2 equivalent of 1.573 metric tonnes. The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.1 kg of refrigerant which has a CO2 equivalent of 1.573 metric tonnes. Less

Versatility

  • Steel track undercarriage allows you to work in wet, soft, or sensitive underfoot conditions.
  • Finish jobs in less time – track loaders can often start the job earlier and work longer than other machines due to their lower ground pressure and increased traction.
  • Quick Coupler Ready – Fusion™ Quick Coupler option allows easy use of forks, buckets, etc. from wheel loaders and other Fusion compatible machines.

Efficiency

  • 963K uses 10–25 percent less fuel per hour than the previous model.*
  • Efficient use of Diesel Exhaust Fluid(1) – typically 2.5-3 percent of fuel consumption – provides excellent overall fluid efficiency.
  • Optional Performance Series bucket helps you move up to 5 percent more material per hour.
  • Tilt cab and convenient service access points for easier maintenance and repair.
  • Demand fan provides efficient cooling plus easy fold-down service access.
  • Remote monitoring with Product Link™/VisionLink® helps you manage your fleet more effectively and profitably.

Performance

  • Smoother implement and steering response, and improved steering performance over the previous model.*
  • Features like load sensing hydraulics and position sensing cylinders offer precise, responsive performance.
  • Cat® C7.1 ACERT™ engine delivers power and fast response when the machine is under load.
  • Reduced engine noise* – quieter for the operator and others around the work site.

Ease of Operation

  • Choose either joystick or two-lever implement controls to match operator preference or application.
  • Speed/steering controls available as either a joystick or as v-lever and foot pedals.
  • Updated cab offers operator comforts like suspension seat, adjustable armrests and controls, and an improved air conditioning system.
  • Excellent visibility to the bucket and all around the machine enhances safety and helps operators work more confidently.
  • Handles and steps help operators climb on and off the machine more easily, from the front or the back of the tracks.
  • Set implement response – fine, normal, coarse – to match operator preference or application.
  • Emissions reduction technology(1) is designed to be transparent to the operator.

*Compared to the 963D.

(1) Machine equipped with U.S. EPA Tier 4 Final/EU Stage IV emissions reduction technology.

Customer Stories

Discover what’s new and how customers like you are benefiting from our products and services. Check back often for updates.

Learn More
Promotions

Looking for that perfect piece of used equipment to complement your fleet? Check out our Used Exclusives, featuring new machines every week!

Learn More
Social

Let’s talk. Connect with us on one of our social channels to start the conversation and see what we’re up to.

Learn More
Branch Locator

Looking for your nearest branch? Get in touch with us today by contacting one of our branches directly. We’re always ready to help.

Learn More
Services

When you choose Finning, you have a wide array of support and specialty services to help you get the most from your equipment.

Learn More
Technology

Integrated technology can help you understand your equipment's output and help extend its lifespan.

Learn More
Finance

Choose from a range of financing solutions that allow you to purchase equipment, parts, services, and technology when you need it.

Learn More