Menu

Back


Overview

Offering world class performance, value and reliability.

Engine

Units:
Rated Net Power 128.0 hp 96.0 kW Less
Model Cat® C6.6 Cat® C6.6 Less
SAE J1349 128.0 hp 96.0 kW Less
ISO 9249 (1997) 130.0 hp 97.0 kW Less
EEC 80/1269 130.0 hp 97.0 kW Less
SAE J1349 138.0 hp 103.0 kW Less
Max. Net Power @ 1800 rpm 138.0 hp 103.0 kW Less
ISO 9249 (1997) 139.0 hp 104.0 kW Less
EEC 80/1269 139.0 hp 104.0 kW Less
Bore 4.13 in 105.0 mm Less
Stroke 5.0 in 127.0 mm Less
Displacement 403.0 in3 6.6 L Less
Net Torque 482.0 ft-lb 653.0 N·m Less
Peak Torque 496.0 ft-lb 673.0 N·m Less

Buckets

Bucket Capacities 1.7 m3 - 2.1 m3 2.2 yd3 - 2.7 yd3 1.7 m3 - 2.1 m3 2.2 yd3 - 2.7 yd3 Less

Weights

Operating Weight 24180.0 lb 10968.0 kg Less

Steering

Steering Articulation 40.0 Degrees 40.0 Degrees Less
Minimum turning radius (over tire) 200.0 in 5070.0 mm Less
Steering angle, each direction 40.0 Degrees 40.0 Degrees Less
Steering cylinders, two, bore 2.75 in 70.0 mm Less
Hydraulic output at 2300 engine rpm and 6900 kPa (1000 psi) 27.0 gal/min 104.0 L/min Less
Maximum working pressure 3000.0 psi 20685.0 kPa Less

Loader Hydraulic System

Output at 2300 engine rpm and 6900 kPa (1000 psi) with SAE 10W oil at 65°C (150°F) 39.5 gal/min 152.0 L/min Less
Pump flow - Implement pump 40.15 gal/min 152.0 L/min Less
Relief Pressure - Implement pump 3755.0 psi 258.9 bar Less
Maximum working pressure 3755.0 psi 25900.0 kPa Less
Hydraulic cycle time: 9 Seconds 9 Seconds Less
Raise 5.2 Seconds 5.2 Seconds Less
Dump 1.1 Seconds 1.1 Seconds Less
Lower, empty, float down 2.7 Seconds 2.7 Seconds Less
Total 9.0 Seconds 9.0 Seconds Less
Bore 4.25 in 107.95 mm Less
Stroke 29.7 in 755.0 mm Less
Bore 4.75 in 120.6 mm Less
Stroke 20.5 in 520.0 mm Less

Service Refill Capacities

Fuel tank 59.4 gal 225.0 L Less
Cooling system 8.5 gal 32.0 L Less
Crankcase 4.4 gal 16.5 L Less
Transmission 6.1 gal 23.0 L Less
Front 5.5 gal 21.0 L Less
Rear 5.5 gal 21.0 L Less
Hydraulic system (including tank) 33.0 gal 125.0 L Less
Hydraulic tank 18.5 gal 70.0 L Less

Transmission

Standard transmission max travel speeds: 23.9 mph 38.5 km/h Less
Forward 1 4.2 mph 6.7 km/h Less
2 7.6 mph 12.2 km/h Less
3 13.5 mph 21.8 km/h Less
4 23.9 mph 38.5 km/h Less
Reverse 1 4.2 mph 6.7 km/h Less
2 7.6 mph 12.2 km/h Less
3 13.5 mph 21.8 km/h Less
Forward 1 2.3 mph 3.7 km/h Less
Optional low speed transmission max travel speeds: 24.2 mph 39.0 km/h Less
2 4.7 mph 7.5 km/h Less
3 12.2 mph 19.6 km/h Less
4 24.2 mph 39.0 km/h Less
Reverse 1 2.5 mph 4.1 km/h Less
2 5.0 mph 8.1 km/h Less
3 13.2 mph 21.2 km/h Less

Tires

Size 20.5 R25 Radial (L-3) 20.5 R25 Radial (L-3) Less
Tread Width 6.2 ft 1890.0 mm Less

Cab

ROPS SAE J1040 MAY94, ISO 3471-1994 SAE J1040 MAY94, ISO 3471-1994 Less
FOPS SAE J231 JAN81, ISO 3449-1992 Level II SAE J231 JAN81, ISO 3449-1992 Level II Less

Dimensions

Wheelbase 9.19 ft 2800.0 mm Less
Height to Top of ROPS/FOPS 10.59 ft 3227.0 mm Less
Height to Top of Exhaust Stack 10.53 ft 3211.0 mm Less
Height to Top of Hood 7.28 ft 2219.0 mm Less
Height to Center of Axle 2.27 ft 692.0 mm Less
Ground Clearance 1.43 ft 436.0 mm Less
Overall Length 22.63 ft 6898.0 mm Less
Length - Rear Axle to Bumper 6.44 ft 1962.0 mm Less
Center Line of Front Axle-Hitch 4.59 ft 1400.0 mm Less
Dump Clearance-Max Lift-45° 9.28 ft 2828.0 mm Less
Bucket Clearance-Max Lift/Carry 11.26 ft 3432.0 mm Less
Bucket Pin Height at Max Lift 12.33 ft 3757.0 mm Less
Overall Height - Bucket Raised 15.78 ft 4809.0 mm Less
Reach at Max Lift and 45° Dump 2.6 ft 791.0 mm Less
Carry Height 1.43 ft 435.0 mm Less
Digging Depth 1.65 in 42.0 mm Less

Operating Specifications

Static Tipping Load (Full Turn) 16844.0 lb 7640.0 kg Less
Reach - full lift/45 degree dump angle 2.583 ft 791.0 mm Less
Dump clearance - Full lift/45 degree dump angle 9.25 ft 2828.0 mm Less
Articulation Angle 40.0 Degrees 40.0 Degrees Less

Power Train

Delivers maximum rimpull to the ground and full power to loader hydraulics.


Hydraulics

System provides high efficiency wtih low effort and precise control.


Loader Linkage

Strong design delivers superior performance.


Operator Station

Superior comfort keeps you productive, all day long.


Buckets

Cat Buckets are built for high performance.


Serviceability

Easy access and minimal maintenance requirements keep your machine on the job.


Customer Support

Unmatched support makes the difference.


924Hz Standard Equipment

ELECTRICAL
  • Alternator, 95-amp
  • Alarm, back-up
  • Batteries, maintenance-free, 950 CCA, (2)
  • Directional signals (front & rear)
  • Starting and charging system, 24V
  • Halogen work lights (front & rear)
  • Ignition key start/stop switch
  • Roading lights
  • Starting aid, thermal
  • Switch, battery disconnect

OPERATOR ENVIRONMENT
  • Standard two door cab includes all of the following items:
  • Sun visor
  • Radio ready kit
  • External mirrors
  • 12 volt electrical accessory outlet
  • Work lights, four cab-mounted (two front, two rear)
  • Sealed Instrument Gauge: • Engine RPM • Hydraulic oil temperature • Engine coolant temperature • Torque converter oil temperature • Digital LED speedometer, hour meter/odometer
  • Indicator Lights: • Turn signal • Primary steering malfunction • Hydraulic oil bypass • Parking brake applied • Brake charge pressure low • Transmission oil temperature • General warning • Electrical system voltage low • Fuel water separator • Bright lights activated
  • Adjustable tilt steering column
  • Coat hook
  • Ground level door release
  • Horn, steering wheel mounted (electric)
  • Hydraulic control lever lockout
  • Interior light
  • Lighter
  • Lunch box storage with cup holder
  • Pilot hydraulic implement controls
  • Rear window defroster, electric
  • Rear view mirrors (2 inside)
  • Seat, adjustable suspension, armrest (fabric or vinyl)
  • Seat belt, 75 mm (3 in), retractable
  • Tinted safety glass
  • Wet arm front & rear wiper/washer, front intermittent

POWER TRAIN
  • Engine, Caterpillar C6.6 ACERT• Low emission diesel engine • Noise reduction technology• Smart waste gate turbocharged• Aftercooled • Filtered Breather• Electronically controlled
  • Air cleaner, dry type
  • Automatic tensioning poly-V belt
  • Axle seal guards, integrated
  • Brakes, enclosed wet-disc full hydraulic
  • Differentials, diff-lock on front
  • Differentials, conventional rear
  • Driveshaft, lubed for life
  • Electric fuel prime pump
  • Engine speed control
  • Fuel/water separator
  • Muffler
  • Radiator, unit serviceable
  • S•O•S oil sampling port, engine oil
  • S•O•S oil sampling port, transmission oil
  • Torque converter
  • Transmission, 4F/3R, autoshift, single lever control with F/N/R and kickdown button
  • Transmission neutralizer; operator programmable

HYDRAULICS
  • Hydraulic diagnostic connectors
  • Heavy duty hydraulic oil cooler
  • Hydraulic control, 2-valve, 1-lever with F/N/R
  • Load-sensing steering system
  • S•O•SSM oil sampling port, hydraulic oil
  • S•O•SSM coolant sampling port

OTHER STANDARD EQUIPMENT
  • Antifreeze/coolant, extended-life protects to -36°C (-33°F)
  • Automatic bucket positioner/fork positioner
  • Brakes, secondary and parking
  • Counterweight
  • Engine enclosure, lockable
  • Fenders, front
  • Hitch, recovery
  • Loader linkage, z-bar
  • Lift kickout, automatic
  • Machine Security System ready
  • Product Link ready
  • Remote grease lines
  • Steering stops, cushioned
  • Swing-out, hydraulically driven demand fan
  • Vandalism protection, lockable service points
  • Visual indicators: - air cleaner service - coolant level - hydraulic oil - transmission oil

924Hz Optional Equipment

Antifreeze/coolant, extended-life, protects to -50°C (-58°F)

Axles, Rear Limited Slip Differential

Beacon light, strobe, magnetic-mount

Buckets/ground engaging tools

Canopy, ROPS

Counterweight, additional, optional

Deluxe Cab arrangement includes:• Sun visor• Rear sunscreeen• Radio ready kit• External heated mirrors• Work lights, six cab-mounted (four front, two rear)

Fan, reversing

Fenders, roading, rear

Fenders, steel

Guards: • Crankcase • Driveshaft, front • Power train • Lights • Radiator

Hydraulic control auxiliary, third valve

Load check valves (dealer installed)

Machine Security System

Material handling arm

Pallet forks, carriage

Quick Coupler

Radiator, wide fin spacing, 5.5 fpi

Radio packages:• Radio, AM/FM• Radio, AM/FM with CD player

Rear-view camera system

Ride Control System

Seat, Cat Contour Seat, fabric, electrically adjustable with air suspension

Sound suppression package, available in select markets

Starting aid, engine coolant heater, 120V

Steering aid, ether

Steering, secondary

Tires: - Bias ply, 17.5 - 25 and 20.5 - 25 - Radial, 17.5 - R25 and 20.5 - R25

Customer Stories

Discover what’s new and how customers like you are benefiting from our products and services. Check back often for updates.

Learn More
Promotions

Save money with our seasonal promotions. Get the equipment, parts, and service you need at reduced prices and boost your bottom line.

Learn More
Social

Let’s talk. Connect with us on one of our social channels to start the conversation and see what we’re up to.

Learn More
Branch Locator

Looking for your nearest branch? Get in touch with us today by contacting one of our branches directly. We’re always ready to help.

Learn More
Services

When you choose Finning, you have a wide array of support and specialty services to help you get the most from your equipment.

Learn More
Technology

Integrated technology can help you understand your equipment's output and help extend its lifespan.

Learn More
Finance

Choose from a range of financing solutions that allow you to purchase equipment, parts, services, and technology when you need it.

Learn More