View Product Downloads

3412C (50 Hz) Standard Equipment

Air Inlet System
  • Air cleaner, single element canister type with service indicator

Control Panel
  • EMCP 4.2B Genset Controller
  • Run / Auto / Stop Control
  • Speed Adjust
  • Voltage Adjust
  • Engine Cycle Crank
  • Emergency stop pushbutton
  • EMCP 4.2 B controller features
  • - 24-volt DC operation
  • - Environmental sealed front face
  • - Text alarm/event descriptions
  • Digital indication for:
  • - RPM
  • - DC volts
  • - Operating hours
  • - Oil pressure (psi, kPa or bar)
  • - Coolant temperature
  • - Volts (L-L & L-N)
  • Frequency (Hz)
  • - Amps (per phase & average)
  • - Power Factor (per phase & average)
  • - kW (per phase, average & percent)
  • - kVA (per phase, average & percent)
  • - kVAr (per phase, average & percent)
  • - kW-hr (total)
  • Warning/shutdown with common LED indication of shutdowns for:
  • Low oil pressure
  • - High coolant temperature
  • - Overspeed
  • - Emergency stop
  • - Failure to start (overcrank)
  • - Low coolant temperature
  • - Low coolant level
  • Programmable protective relaying functions:
  • - Generator phase sequence
  • - Over/Under voltage (27/59)
  • - Over/Under Frequency (81 o/u)
  • - Reverse Power (kW) (32)
  • - Reverse Reactive Power (kVAr) (32RV)
  • - Overcurrent (50/51)
  • Communications
  • - Customer data link (Modbus RTU)
  • - Accessory module data link
  • - Serial annunciator module data link
  • - 6 programmable digital inputs
  • - 4 programmable relay outputs (Form A)
  • - 2 programmable relay outputs (Form C)
  • - 2 programmable digital outputs
  • Compatible with the following optional modules:
  • - Digital I/O module
  • - Local Annunciator
  • - Remote CAN annunciator
  • - Remote serial annunciator
  • - Generator temperature monitoring module

  • Radiator with guard (Sized for 50 degrees C)
  • Coolant drain line with valve, piped to edge of base
  • Fan and belt guards
  • Caterpillar Extended Life Coolant
  • Coolant level shutdown

Exhaust System
  • Stainless steel exhaust flex with ANSI style outlet flange, gasket, bolts and mating weld flange, shipped loose

Fuel System
  • Primary and secondary fuel filters
  • Fuel priming pump
  • Flexible fuel lines terminated on base
  • Water seperator

Generator and Attachments
  • SR4B self excited
  • Class H insulation
  • Class F temerature rise
  • 12 lead
  • VR6 Voltage Regulator
  • 3-phase sensing
  • 2:1 Volts/Hz
  • Reactive droop
  • Bus bar termination

Governing System
  • Cat electronic governor

Lube System
  • Lubricating oil
  • Oil filter
  • Oil drain line with valve, piped to edge of base
  • Fumes disposal, piped to front of radiator

Mounting System
  • Base, formed steel with linear vibration isolators between base and engine-generator

Starting / Charging System
  • 45 amp charging alternator
  • Fuel shutoff solenoid
  • 24 volt starting motor
  • Battery with rack, cables

3412C (50 Hz) Optional Equipment

Air Inlet System
  • Duel element air cleaners
  • Heavy duty air cleaners
  • Open element air cleaners

Circuit breakers
  • 1250, 1600 Amp, 3 pole, IEC 100% rated, 24 volt DC shunt trip
  • 1600 Amp, 3 pole, Non-UL, 100% rated, 24 volt DC shunt trip

Control Panels
  • EMCP 4.3
  • EMCP 4.4
  • Vandal proof panel door
  • Common alarm / shutdown relay
  • Generator running VFC
  • Generator temperature monitoring package
  • Ground fault relay
  • First local annunicators
  • Remote custom annunicators
  • Local discrete I/O package

Cooling System
  • Radiator duct flange
  • Jacket water heaters

European Certifications
  • Eurasian conformity (EAC) mark

  • Mufflers
  • Elbow kit
  • Through wall installation kit
  • Manifold and turbocharger guard

Generator and Attachments
  • Permanent magnet excitation
  • Digital voltage regulator
  • Space heater
  • Oversize and premium generators

Lube System
  • Manual sump pump

  • Fuel tank base (1200 ltr)

Special Tests / Reports
  • PGS test report @ 1.0 power factor
  • PGS test report @ 0.8 power factor

Starting / Charging
  • Battery chargers
  • Oversize batteries
  • Battery disconnect switch
  • Heavy-duty starting system

Governing System
  • Electronic load share


Caterpillar is leading the power generation marketplace with Power Solutions engineered to deliver unmatched flexibility, expandability, reliability, and cost-effectiveness.

Generator Set Specifications

Minimum Rating 680 kVA 680 kVA Less
Maximum Rating 900 kVA 900 kVA Less
Voltage 208 to 600 Volts 208 to 600 Volts Less
Frequency 50 Hz 50 Hz Less
Speed 1500 RPM 1500 RPM Less

Generator Set Configurations

Emissions/Fuel Strategy Low Fuel Consumption Low Fuel Consumption Less

Engine Specifications

Engine Model 3412C TA, V-12, 4-Stroke Water-Cooled Diesel 3412C TA, V-12, 4-Stroke Water-Cooled Diesel Less
Compression Ratio 13:0:1 13:0:1 Less
Aspiration TA TA Less
Governor Type ADEM™ A5 ADEM™ A5 Less
Fuel System Pump and Lines Pump and Lines Less
Bore 5.4 in 137.2 mm Less
Displacement 1648.86 in3 27.02 L Less
Stroke 6.0 in 152.4 mm Less

Cat™ Diesel Engine

  • Reliable, rugged, durable design
  • Field-proven in thousands of applications worldwide
  • Four-stroke-cycle diesel engine combines consistent performance and excellent fuel economy with minimum weight
  • Generator

  • Matched to the performance and output characteristics of Cat engines
  • Industry leading mechanical and electrical design
  • Industry leading motor starting capabilities
  • High Efficiency
  • Cat EMCP Control Panel

    The EMCP controller features the reliability and durability you have come to expect from your Cat equipment. EMCP4 is a scalable control platform designed to ensure reliable generator set operation, providing extensive information about power output and engine operation. EMCP4 systems can be further customized to meet your needs through programming and expansion modules.

    Design Criteria

    The generator set accepts 100% rated load in one step per NFPA 110 and meets ISO 8528-5 transient response.

    Single-Source Supplier

    Fully prototype tested with certified torsional vibration analysis available

    World Wide Product Support

    Cat dealers provide extensive post-sale support including maintenance and repair agreements. Cat dealers have over 1,800 dealer branch stores operating in 200 countries. The Caterpillar S•O•S℠ program cost effectively detects internal engine component condition, even the presence of unwanted fluids and combustion by-products

    Customer Stories

    Discover what’s new and how customers like you are benefiting from our products and services. Check back often for updates.

    Learn More

    Looking for that perfect piece of used equipment to complement your fleet? Check out our Used Exclusives, featuring new machines every week!

    Learn More

    Let’s talk. Connect with us on one of our social channels to start the conversation and see what we’re up to.

    Learn More
    Branch Locator

    Looking for your nearest branch? Get in touch with us today by contacting one of our branches directly. We’re always ready to help.

    Learn More

    When you choose Finning, you have a wide array of support and specialty services to help you get the most from your equipment.

    Learn More

    Integrated technology can help you understand your equipment's output and help extend its lifespan.

    Learn More

    Choose from a range of financing solutions that allow you to purchase equipment, parts, services, and technology when you need it.

    Learn More

    Please share your feedback on!

    Close window

    We are committed to providing you with the best site experience possible.  Please take our brief survey to tell us how we are doing.

    Thank you in advance for your time!