Menu

Back


View Product Downloads

Overview

Generator Set Specifications

Units:
Minimum Rating 4700 ekW (5875 kVA) 4700 ekW (5875 kVA) Less
Maximum Rating 4840 ekW (6050 kVA) 4840 ekW (6050 kVA) Less
Frequency 50 Hz or 60 Hz 50 Hz or 60 Hz Less
Speed 1000 rpm (50 hz) or 900 rpm (60 hz) 1000 rpm (50 hz) or 900 rpm (60 hz) Less

Engine Specifications

Aspiration Turbocharged-Aftercooled Turbocharged-Aftercooled Less
Bore 11.0 in 280.0 mm Less
Stroke 11.8 in 300.0 mm Less
Displacement 18062.0 in3 296.0 L Less
Governor Type Electronic Electronic Less
Fuel System EUI EUI Less
Compression Ratio 50 Hz 13.1 13.1 Less
Compression Ratio 60 Hz 13:1 13:1 Less
Engine Model Vee 16, 4-Stroke-Cycle Diesel Vee 16, 4-Stroke-Cycle Diesel Less

Generator Set Configurations

Emissions/Fuel Strategy EPA Tier 2, IMO II EPA Tier 2, IMO II Less

Generator Set Dimensions

Length 366.7 in 9314.0 mm Less
Width 78.3 in 1990.0 mm Less
Height 164.1 in 4167.0 mm Less
Weight 31000 kg/ 68343 lb (engine dry weight), 18145 kg/ 40000 lb (generator weight) 31000 kg/ 68343 lb (engine dry weight), 18145 kg/ 40000 lb (generator weight) Less

A3 ECU

Customer Interface Panel

Electronic Unit Injectors

C280-16 Standard Equipment

Air Inlet System
  • Aftercooler — fresh water, corrosion resistant coated (air side); air inlet shutoff; breather — crankcase, top-mounted; turbocharger — engine oil lubricated

Control System
  • Single Caterpillar® A3 electronic control unit (ECU) with electronic unit injector fuel system, rigid wiring harness (10 amp, 24 volt power required to drive ECUs)

Cooling System
  • Engine coolant water drains

Exhaust System
  • Dry, gas tight, exhaust manifold

Fuel System
  • Distillate fuel (requires viscosity ranging from 1.4 cSt to 20 cSt at 38° C), fuel transfer pump (mounted on left-hand side), duplex fuel filters, electronically controlled unit injectors

Lube Oil System
  • Centrifugal oil filters with single shutoff, service side engine mounted on cylinder block inspection covers includes installed oil lines and single shutoff valve, filters centrifuge bypass oil from the main lubricating oil pump, can be serviced with the engine running, oil filler and dipstick valve, oil pressure regulating valves, crankcase explosion relief valves

General
  • Caterpillar yellow paint; gear-driven pumps: fuel, oil, jacket water, aftercooler/oil cooler water; service literature

C280-16 Optional Equipment

Torsional coupling

Fresh water heat exchanger

Fuel cooler

Expansion tank

Emergency pumps and connections

Jacket water heater

Flexible connections

Anti-vibration isolators

Customer Stories

Discover what’s new and how customers like you are benefiting from our products and services. Check back often for updates.

Learn More
Promotions

Looking for that perfect piece of used equipment to complement your fleet? Check out our Used Exclusives, featuring new machines every week!

Learn More
Social

Let’s talk. Connect with us on one of our social channels to start the conversation and see what we’re up to.

Learn More
Branch Locator

Looking for your nearest branch? Get in touch with us today by contacting one of our branches directly. We’re always ready to help.

Learn More
Services

When you choose Finning, you have a wide array of support and specialty services to help you get the most from your equipment.

Learn More
Technology

Integrated technology can help you understand your equipment's output and help extend its lifespan.

Learn More
Finance

Choose from a range of financing solutions that allow you to purchase equipment, parts, services, and technology when you need it.

Learn More