View Product Downloads

M 20 C Standard Equipment

Air Inlet System
  • Air intake silencer / filter

Control System
  • Load Sharing Unit (for multiple engine plant only)
  • Protection System
  • Serial Link Interface (MODbus RTU / canbus)
  • Speed governor

Cooling System
  • Charge air cooler
  • Electric cooling water preheater (fitted on base frame)
  • HT cooling water pump (engine driven)
  • LT cooling water pump (engine driven)

Exhaust System
  • Exhaust gas expansion joint
  • Exhaust gas insulated manifolds
  • Turbocharger at counter-flywheel side

Fuel System
  • Fuel circulating pump (attached / for MDO/MGO only)
  • Fuel indicator filter
  • Fuel pressure valve (separate / for MDO/MGO only)

  • Control push buttons and lamps
  • Emergency stop lever
  • Local control panel
  • Pressure and temperature indicator

Lube System
  • Lube oil cooler
  • Lube oil pump (engine driven)
  • Lube oil self-cleaning filter
  • Oil sump in base frame
  • Pre-lubricating oil pump (electr. driven/fitted on base frame)
  • Pressure regulating valve

Mounting System
  • Flexible pipe connections
  • High flexible coupling
  • Resilient mounting

Starting System
  • Air starting motor
  • Manual barring device

  • Engine, flex. coupling and generator mounted on a common base frame
  • Flywheel cover
  • Lifting device (rental)
  • Torsional Vibration Calculation (TVC)

M 20 C Optional Equipment

Air Inlet System
  • Air inlet shut-off valve
  • Air intake transition piece
  • Expansion joint
  • Silencer / filter

Control System
  • Air injection control (for better load request)
  • Electronic speed governor
  • Engine alarm system
  • Remote indicators (start air pressure, engine speed, etc.)
  • Starter for electric driven pumps
  • 24 DC UPS

Cooling System
  • FW/SW plate cooler
  • HT cooling water pump (electric driven)
  • LT cooling water pump (electric driven)
  • Sea water cooling pump (electric driven)
  • Temperature control valve

Exhaust System
  • Silencer (with or without spark arrester)

Fuel System
  • Fuel oil cooler
  • HFO final preheater
  • HFO pressure regulating valve
  • HFO self-cleaning automatic filter
  • HFO supply and booster pumps (electrical driven)
  • HFO treatment and supply modules
  • HFO viscosity control device
  • Mixing tank

Lube System
  • Lube oil centrifuge
  • Lube oil pump (electrical driven)
  • Lube oil treatment and combined modules

Mounting System
  • Double resilient mounting

Starting System
  • Starting air compressor
  • Starting air receiver

  • Engine PTO coupling
  • Generator customer supply
  • PTO shaft on counter-flywheel side


The main features of the diesel generator set M 20 C are ease of installation, reliable operation, ease of maintenance and easy component accessibility. Its base is the rigid frame which forms a foundation for both the engine and the generator set and includes an integral, large-capacity oil sump and universal fuel supply equipment covering both HFO and MDO operation. The M 20C has a wide range of application providing power for the continuous generation of electricity where a high level of reliability is important. The power range of the M20C engine series as a generator unit varies from 1,224 to 2,160 kVA.

Generator Set Specifications

Minimum Rating 979 kWe (1224 kVA) 979 kWe (1224 kVA) Less
Maximum Rating 1726 kWe (2160 kVA) 1726 kWe (2160 kVA) Less

Engine Specifications

Configuration 6,8,9 Cylinder 6,8,9 Cylinder Less
Bore 7.87 in 200.0 mm Less
Stroke 11.81 in 300.0 mm Less
Swept Volume 573.62 in³ 9.4 l/cyl Less

Generator Set Configurations

Emissions/Fuel Strategy IMO II IMO II Less

Generator Set Dimensions and Weights - Dependent on Generator Type

Height 2833 mm - 3010 mm (111.5 in - 118.5 in) 2833 mm - 3010 mm (111.5 in - 118.5 in) Less
Length 6073 mm - 7125 mm (239.1 in - 280.5 in) 6073 mm - 7125 mm (239.1 in - 280.5 in) Less
Weight 18.8 t - 30.0 t (41447 lbs - 66139 lbs) 18.8 t - 30.0 t (41447 lbs - 66139 lbs) Less
Width 1680 mm - 1816 mm ( 66.1 in - 71.5 in) 1680 mm - 1816 mm ( 66.1 in - 71.5 in) Less

Engine with high safety level

The M 20 C is an engine with a high safety level. This applies not only to those special internal design features which guarantee long component life and high availability but also to safety in the area around the engine. As a result, SOLAS regulations are strictly and consistently observed. Explosion protection cover for the cylinder/crankcase housing and cladding of the complete fuel and exhaust gas system in stainless steel are part of an overall SOLAS safety concept.

HFO/MDO – Long TBO and lifetime

Long maintenance intervals and the life of components are the basis for low operating costs.

Complete engine

The engine is marketed with a standardized range of installed pumps and filters. Interfaces for fuel, lubricating oil and cooling water systems are located at the opposite end of the crankshaft coupling for ease of connection.

Reliable energy supply

The complete diesel generating set is notable for its ease of installation, reliable operation, ease of maintenance and good component accessibility. The basis is formed by the rigid base frame as foundation of the engine and alternator with integrated oil sump, large oil volume and universal equipment for both HFO and MDO operation.

Customer Stories

Discover what’s new and how customers like you are benefiting from our products and services. Check back often for updates.

Learn More

Looking for that perfect piece of used equipment to complement your fleet? Check out our Used Exclusives, featuring new machines every week!

Learn More

Let’s talk. Connect with us on one of our social channels to start the conversation and see what we’re up to.

Learn More
Branch Locator

Looking for your nearest branch? Get in touch with us today by contacting one of our branches directly. We’re always ready to help.

Learn More

When you choose Finning, you have a wide array of support and specialty services to help you get the most from your equipment.

Learn More

Integrated technology can help you understand your equipment's output and help extend its lifespan.

Learn More

Choose from a range of financing solutions that allow you to purchase equipment, parts, services, and technology when you need it.

Learn More

Please share your feedback on!

Close window

We are committed to providing you with the best site experience possible.  Please take our brief survey to tell us how we are doing.

Thank you in advance for your time!