Menu

Back


View Product Downloads

C15 Engine with ACERT Technology

C15 Engine with ACERT Technology

C15 Engine with ACERT Technology

C15 Engine with ACERT Technology

C15 Engine with ACERT Technology

Operator Station

Operator Station

Operator Station

Operator Station

Operator Station

Operator Station

Operator Station

Implement and Steering Controls

Implement and Steering Controls

Implement and Steering Controls

Drive Train

Drive Train

Drive Train

Drive Train

Drive Train

Undercarriage

Undercarriage

Undercarriage

Undercarriage

Work Tools

Work Tools

Work Tools

Work Tools

Work Tools

Work Tools

Integrated Electronic Solutions

Integrated Electronic Solutions

Integrated Electronic Solutions

Integrated Electronic Solutions

Integrated Electronic Solutions

Integrated Electronic Solutions

Integrated Electronic Solutions

Structures

Structures

Structures

Structures

Customer Support

Customer Support

D8T Standard Equipment

POWER TRAIN
  • C15 ACERT diesel engine with EUI (Electronic Unit Injection)
  • 24-volt electric start
  • Advanced modular cooling system
  • Aftercooler, air-to-air (ATAAC)
  • Air filter, with electronic service indicator
  • Coolant, extended life
  • Fan, suction, hydraulically driven
  • Fast Fuel System
  • Fuel priming pump, electric
  • Muffler
  • Parking brake, electronic
  • Pre-cleaner, stratta-tube dust ejector
  • Prescreener
  • Shift management: – Automatic directional and downshift – Controlled-throttle, load-compensated
  • Starting aid, automatic ether
  • Torque divider
  • Transmission control module, electronic
  • Transmission, electronically-controlled: – Powershift, 3F/3R speed
  • Four planet, double-reduction: – Planetary final drives
  • Transmission control module, electronic
  • Turbocharger, wastegate
  • Water separator

UNDERCARRIAGE
  • Rollers and idlers, lifetime lubricated
  • Sprocket rim segments, replaceable
  • Suspension-type undercarriage, 8-roller tubular track roller frame (Carrier roller ready)
  • Track adjusters, hydraulic
  • Track guides: – 610 mm (24 in) PPR moderate service grouser with sealed and lubricated track (44 section)
  • Two-piece master link

HYDRAULICS
  • Hydraulics, independent steering and work tool pumps
  • Hydraulics, electronically controlled, load-sensing dozer lift and tilt

STARTERS, BATTERIES AND ALTERNATORS
  • Alternator, 150 amp
  • Batteries, heavy duty
  • Starting receptacle, auxiliary

ELECTRICAL
  • Alarm, back-up
  • Converter, 24V to 12V
  • Diagnostic connector
  • Horn, forward warning

OPERATOR ENVIRONMENT
  • Armrest, adjustable
  • Advisor operator interface: – Electronic monitoring system – Diagnostic service information – Operator preferences
  • Cab, ROPS, FOPS, sound suppressed
  • Deactivation switch, hydraulic controls
  • Decelerator pedal
  • Governor switch, electronic
  • Heater and ventilation
  • Mirror, rearview
  • Radio-ready
  • Seat, cloth, air suspension
  • Seatbelt, retractable
  • Steering control, twist tiller with touch shift
  • Wipers, intermittent

OTHER STANDARD EQUIPMENT
  • CD ROM Parts Book
  • Ecology drain – Engine oil, coolant, hydraulic oil, torque converter, fuel tank, power train case and transmission
  • Engine enclosures
  • Equalizer bar, pinned
  • Front pull device
  • Guards, bottom hinged
  • Grade control ready
  • Heater, engine coolant
  • Radiator, hinged fan blast deflector
  • HVAC box – corrosive resistant
  • Mounting, Lift Cylinders
  • Oil cooler, hydraulic
  • Product Link ready
  • S•O•S sampling ports
  • Steering, electronically-controlled power differential
  • Vandalism protection for fluid compartments

D8T Optional Equipment

ELECTRICAL
  • Light, ripper
  • Lights, supplemental: – 6 Halogen – 8 HID high-mount for waste application – 10 Halogen – 10 Halogen high-mount for waste application – Warning, strobe
  • Switch, disconnect, remote mounted
  • WAVS single rear vision camera
  • AccuGrade ARO
  • CAES ARO

GUARDS
  • Fan, debris
  • Final drive and seals
  • Fuel tank
  • Idler seals
  • Pivot shaft seal
  • Radiator, heavy-duty, hinged
  • Rear tractor
  • Screen, rear
  • Sweeps
  • Track roller
  • Transmission
  • Undercarriage

UNDERCARRIAGE
  • Undercarriage PPR
  • Non-suspended
  • Tracks, Pair, Sealed and Lubricated (Standard arrangement): – 607 mm (24 in) Extreme and Moderate Service – 660 mm (26 in) Extreme and Moderate Service – 711 mm (28 in) Extreme and Moderate Service
  • Undercarriage SystemOne™: – 610 mm (24 in) Extreme and Super Extreme Service – 660 mm (26 in) Extreme and Super Extreme Service – 711 mm (28 in) Extreme and Super Extreme Service
  • Roller Options: – Carrier rollers (one per side) – Seals, arctic idler/roller

POWER TRAIN
  • Fan, reversible
  • Pre-cleaner, turbine
  • Prelube, engine, automatic
  • Quick oil change system
  • Radiator, high ambient

OPERATOR ENVIRONMENT
  • Air conditioner, under-hood mounted
  • Air conditioner, fender mounted
  • Air conditioner, ROPS mounted
  • Canopy
  • Enhanced cab
  • Glass, Ultra-strength up to 275 kPa (40 psi)
  • Operators Arrangement (gives additional comfort for smaller operators)
  • Seat, vinyl

SPECIAL ARRANGEMENTS
  • Hydraulic implement towing arrangement, Low Ground Pressure arrangement, Waste Handling arrangement and Woodchip arrangement, in addition to other optional attachments are available from the factory. Contact your dealer for availability.

BULLDOZER ATTACHMENTS
  • AccuGrade GPS attachment ready installation (provides hydraulics, electrical, and blade mount for system)
  • Dual tilt cylinders
  • 8SU Blade, with rock guard and wear plate
  • 8SU Blade, with push plate
  • 8U Blade, with rock guard
  • Trunnion cover, (replaces trunnions)

RIPPERS
  • Single-Shank (A rear attachment and/or counterweight is recommended for improved performance and balance.) – Standard depth
  • Single-Shank (A rear attachment and/or counterweight is recommended for improved performance and balance.) – Deep ripping
  • Multi-Shank (A rear attachment and/or counterweight is recommended for improved performance and balance.) (includes one tooth)
  • Ripper attachments: – Additional tooth (for multi-shank ripper) – Pin Puller, hydraulic

OTHER ATTACHMENTS
  • Counterweights (A rear attachment and/or counterweight is recommended for improved performance and balance.): – Front mounted – Rear mounted
  • Drawbar, rigid
  • Parts book, paper
  • Starting aids
  • Striker bars, front and rear
  • Winch (A rear attachment and/or counterweight is recommended for improved performance and balance.) (A rear screen is recommended for operator protection when fitted with winch option.)

Overview

The D8T is engineered to be durable and reliable in the toughest working conditions. A Cat C15 engine provides superior performance and fuel efficiency while meeting emissions targets through ACERT Technology. The D8T is easy to operate and convenient to service to help achieve more productivity on the job site. And when service is needed, the D8T is backed by the outstanding support of the Cat dealer network.

Engine

Units:
Engine Model Cat® C15 ACERT™ Cat® C15 ACERT™ Less
Flywheel Power 310.0 mm H2O 231.0 kg/mm Less
Gross Power 347.0 mm H2O 259.0 kg/mm Less
Bore 5.4 in 137.0 mm Less
Stroke 6.75 in 172.0 mm Less
Displacement 928.0 in³ 15.2 l Less
Gross Power - ISO 14396 333.0 mm H2O 248.0 kg/mm Less
Net Power - Caterpillar 310.0 mm H2O 231.0 kg/mm Less
Net Power - DIN 70020 322 PS 322 PS Less
Net Power - EU 80/1269 310.0 mm H2O 231.0 kg/mm Less
Net Power - ISO 9249 310.0 mm H2O 231.0 kg/mm Less
Net Power - SAE J1349 307.0 mm H2O 229.0 kg/mm Less
Emissions U.S. EPA Tier 3/EU Stage IIIA equivalent, Brazil MAR-1 U.S. EPA Tier 3/EU Stage IIIA equivalent, Brazil MAR-1 Less
Note (1) Engine ratings apply at 1,850 rpm. Engine ratings apply at 1,850 rpm. Less
Note (2) Net power advertised is the power available at the flywheel when the engine is equipped with fan, air cleaner, muffler, and alternator. Net power advertised is the power available at the flywheel when the engine is equipped with fan, air cleaner, muffler, and alternator. Less
Note (3) No derating required up to 3658 m (12,000 ft) altitude, beyond 3658 m (12,000 ft) automatic derating occurs. No derating required up to 3658 m (12,000 ft) altitude, beyond 3658 m (12,000 ft) automatic derating occurs. Less

Weights

Operating Weight 84850.0 lb 38488.0 null Less
Shipping Weight 65152.0 lb 29553.0 null Less
Note (1) Operating Weight: Includes hydraulic controls, blade tilt cylinder, coolant, lubricants, 100% fuel, ROPS, FOPS cab, SU-Blade, Single-Shank Ripper, 610 mm (24 in) MS shoes, and operator. Operating Weight: Includes hydraulic controls, blade tilt cylinder, coolant, lubricants, 100% fuel, ROPS, FOPS cab, SU-Blade, Single-Shank Ripper, 610 mm (24 in) MS shoes, and operator. Less
Note (2) Shipping Weight: Includes coolant, lubricants, 20% fuel, ROPS, FOPS cab, and 610 mm (24 in) MS shoes. Shipping Weight: Includes coolant, lubricants, 20% fuel, ROPS, FOPS cab, and 610 mm (24 in) MS shoes. Less

Dimensions

Height - FOPS Cab 11.34 ft 3456.0 mm Less
Height - Top of Stack 11.31 ft 3448.0 mm Less
Length - Basic Tractor - With Winch 17.31 ft 5275.0 mm Less
Length - With Multi-Shank Ripper 20.81 ft 6344.0 mm Less
Length - With Single-Shank Ripper 21.0 ft 6422.0 mm Less
Overall Length - Basic Tractor 15.23 ft 4641.0 mm Less
Overall Length - SU-Blade/SS Ripper 25.83 ft 7872.0 mm Less
Track Gauge 6.82 ft 2080.0 mm Less
Width - Without Trunnions - Standard Shoe 9.0 ft 2743.0 mm Less
Height - ROPS/Canopy 11.35 ft 3461.0 mm Less
Length - Basic Tractor - With Drawbar 16.4 ft 4998.0 mm Less
Length - With A-Blade 20.6 ft 6278.0 mm Less
Length - With SU-Blade 20.0 ft 6091.0 mm Less
Length - With U-Blade 21.1 ft 6434.0 mm Less
Width - Over Trunnions 10.0 ft 3057.0 mm Less
Ground Clearance 24.3 in 618.0 mm Less
Drawbar Height (Center of Clevis) 27.87 in 708.0 mm Less
Length - Track on Ground 10.52 ft 3207.0 mm Less

Transmission

1 Forward 2.1 mile/h 3.4 km/h Less
2 Forward 3.8 mile/h 6.1 km/h Less
3 Forward 6.6 mile/h 10.6 km/h Less
1 Reverse 2.8 mile/h 4.5 km/h Less
2 Reverse 5.0 mile/h 8.0 km/h Less
3 Reverse 8.8 mile/h 14.2 km/h Less
1 Forward - Drawbar Pull (1000) 139.0 lbf 618.5 N Less
2 Forward - Drawbar Pull (1000) 76.0 lbf 338.2 N Less
3 Forward - Drawbar Pull (1000) 42.0 lbf 186.9 N Less

Hydraulic Controls

Pump Type Piston-type, Variable displacement Piston-type, Variable displacement Less
Pump Output - Steering 73.0 gal/min 276.0 l/min Less
Pump Output - Implement 60.0 gal/min 226.0 l/min Less
Tilt Cylinder Flow - Rod End Flow 34.0 gal/min 130.0 l/min Less
Tilt Cylinder Flow - Head End Flow 45.0 gal/min 170.0 l/min Less
Bulldozer Relief Valve Setting 3500.0 psi 24100.0 kPa Less
Tilt Cylinder Relief Valve Setting 3500.0 psi 24100.0 kPa Less
Ripper - Lift - Relief Valve Setting 3500.0 psi 24100.0 kPa Less
Ripper - Pitch - Relief Valve Setting 3500.0 psi 24100.0 kPa Less
Steering 5700.0 psi 39200.0 kPa Less
Note (1) Steering Pump output measured at 2,300 rpm and 30 000 kPa (4,351 psi). Steering Pump output measured at 2,300 rpm and 30 000 kPa (4,351 psi). Less
Note (2) Implement Pump output measured at 1,850 rpm and 6895 kPa (1,000 psi). Implement Pump output measured at 1,850 rpm and 6895 kPa (1,000 psi). Less
Note (3) Electro-hydraulic pilot valve assists operations of ripper and dozer controls. Standard hydraulic systems includes four valves. Electro-hydraulic pilot valve assists operations of ripper and dozer controls. Standard hydraulic systems includes four valves. Less
Note (4) Complete system consists of pump, tank with filter, oil cooler, valves, lines, linkage and control levers. Complete system consists of pump, tank with filter, oil cooler, valves, lines, linkage and control levers. Less

Undercarriage

Shoe Type Moderate Service Moderate Service Less
Width - Shoe 24.0 in 610.0 mm Less
Shoes/Side 44 44 Less
Grouser Height 3.0 in 78.0 mm Less
Pitch 8.5 in 216.0 mm Less
Ground Clearance 24.3 in 618.0 mm Less
Track Gauge 82.0 in 2082.0 mm Less
Length - Track on Ground 10.5 ft 3207.0 mm Less
Ground Contact Area 6048.0 in² 3.9 m² Less
Track Rollers/Side 8 8 Less
Number of Carrier Rollers 1 per side (optional) 1 per side (optional) Less
Note Positive Pin Retention Track. Positive Pin Retention Track. Less

Service Refill Capacities

Fuel Tank 170.0 gal (US) 643.0 l Less
Cooling System 20.3 gal (US) 77.0 l Less
Engine Crankcase* 10.0 gal (US) 38.0 l Less
Power Train 41.0 gal (US) 155.0 l Less
Final Drive - Each 3.3 gal (US) 12.5 l Less
Roller Frames - Each 17.2 gal (US) 65.0 l Less
Pivot Shaft Compartment 10.6 gal (US) 40.0 l Less
Note *With oil filters. *With oil filters. Less

Blades - 8A, Angle and Straight

Capacity 6.1 yd³ 4.7 m³ Less
Digging Depth 24.7 in 628.0 mm² Less
Ground Clearance 51.5 in 1308.0 mm² Less
Height 3.85 ft² 1174.0 mm² Less
Maximum Tilt 28.7 in 729.0 mm² Less
Note (1) *Includes blade tilt cylinder. *Includes blade tilt cylinder. Less
Total Operating Weight** - With Blade and Single-Shank Ripper 86328.0 lb 39158.0 null Less
Weight* - Without Hydraulic Controls 12035.0 lb 5459.0 null Less
Width - Over End Bits 16.37 ft² 4990.0 mm² Less
Note (2) **Operating Weight: Includes hydraulic controls, blade tilt cylinder, coolant, lubricants, 100% fuel, ROPS, FOPS cab, Blade, Single-Shank Ripper, 560 mm (22 in) MS shoes, and operator. **Operating Weight: Includes hydraulic controls, blade tilt cylinder, coolant, lubricants, 100% fuel, ROPS, FOPS cab, Blade, Single-Shank Ripper, 560 mm (22 in) MS shoes, and operator. Less

Blades - 8SU

Capacity - SAE J1265 11.4 yd³ 8.7 m³ Less
Digging Depth 22.6 in 575.0 mm Less
Ground Clearance 48.2 in 1225.0 mm Less
Height 5.5 ft 1690.0 mm Less
Maximum Tilt 34.8 in 883.0 mm Less
Note (1) *Includes blade tilt cylinder. *Includes blade tilt cylinder. Less
Total Operating Weight** - With Blade and Single-Shank Ripper 84850.0 lb 38488.0 null Less
Weight* - Without Hydraulic Controls 10557.0 lb 4789.0 null Less
Width - Over End Bits 12.93 ft 3940.0 mm Less
Note (2) **Operating Weight: Includes hydraulic controls, blade tilt cylinder, coolant, lubricants, 100% fuel, ROPS, FOPS cab, Blade, Single-Shank Ripper, 560 mm (22 in) MS shoes, and operator. **Operating Weight: Includes hydraulic controls, blade tilt cylinder, coolant, lubricants, 100% fuel, ROPS, FOPS cab, Blade, Single-Shank Ripper, 560 mm (22 in) MS shoes, and operator. Less

Blades - 8U

Capacity - SAE J1265 15.3 yd³ 11.7 m³ Less
Digging Depth 22.6 in 575.0 mm Less
Ground Clearance 24.3 in 618.0 mm Less
Height 5.75 ft 1740.0 mm Less
Maximum Tilt 37.5 in 954.0 mm Less
Note (1) *Includes blade tilt cylinder. *Includes blade tilt cylinder. Less
Total Operating Weight** - With Blade and Single-Shank Ripper 86093.0 lb 39051.0 null Less
Weight* - Without Hydraulic Controls 11800.0 lb 5352.0 null Less
Width - Over End Bits 14.0 ft 4267.0 mm Less
Note (2) **Operating Weight: Includes hydraulic controls, blade tilt cylinder, coolant, lubricants, 100% fuel, ROPS, FOPS cab, Blade, Single-Shank Ripper, 560 mm (22 in) MS shoes, and operator. **Operating Weight: Includes hydraulic controls, blade tilt cylinder, coolant, lubricants, 100% fuel, ROPS, FOPS cab, Blade, Single-Shank Ripper, 560 mm (22 in) MS shoes, and operator. Less

Rippers - Multi-Shank, Adjustable Parallelogram

Added Length 5.25 ft² 1598.0 mm² Less
Additional Shank 732.0 lb 332.0 null Less
Maximum Clearance Raised - Under Tip, Pinned in Bottom Hole 23.35 in 593.0 mm² Less
Maximum Penetration - Standard Tip 30.7 in 780.0 mm² Less
Maximum Penetration Force - Shank Vertical 27920.0 lb 124.2 kN Less
Note **Total Operating Weight: Includes hydraulic controls, blade tilt cylinder, coolant, lubricants, 100% fuel, ROPS, FOPS cab, SU-Blade, Multi Shank Ripper, 610 mm (24 in) MS shoes, and operator. **Total Operating Weight: Includes hydraulic controls, blade tilt cylinder, coolant, lubricants, 100% fuel, ROPS, FOPS cab, SU-Blade, Multi Shank Ripper, 610 mm (24 in) MS shoes, and operator. Less
Number of Pockets 3 3 Less
Overall Beam Width 97.0 in 2464.0 mm Less
Pry-Out Force - Multi-Shank Ripper with One Tooth 51230.0 lb 227.9 kN Less
Total Operating Weight** - With SU-Blade and Ripper 86597.0 lb 39280.0 null Less
Weight - One Shank - Without Hydraulic Controls 10752.0 lb 4877.0 null Less

Rippers - Single-Shank, Adjustable Parallelogram

Added Length 5.55 ft 1692.0 mm Less
Maximum Clearance Raised - Under Tip, Pinned in Bottom Hole 25.0 in 636.0 mm Less
Maximum Penetration - Standard Tip 44.4 in 1130.0 mm Less
Maximum Penetration Force - Shank Vertical 28620.0 lb 127.3 kN Less
Note *Total Operating Weight: Includes hydraulic controls, blade tilt cylinder, coolant, lubricants, 100% fuel, ROPS, FOPS cab, SU-Blade, Ripper, 610 mm (24 in) MS shoes, and operator. *Total Operating Weight: Includes hydraulic controls, blade tilt cylinder, coolant, lubricants, 100% fuel, ROPS, FOPS cab, SU-Blade, Ripper, 610 mm (24 in) MS shoes, and operator. Less
Number of Pockets 1 1 Less
Pry-Out Force 50070.0 lb 222.7 kN Less
Total Operating Weight* - With SU-Blade and Ripper 84850.0 lb 38488.0 null Less
Weight - Without Hydraulic Controls 9005.0 lb 4085.0 null Less

Winches - PA140VS

Drum Width 12.6 in 320.0 mm Less
Flange Diameter 18.0 in 457.0 mm Less
Increased Tractor Length 22.2 in 563.0 mm Less
Note (1) Variable speed, hydraulically driven, dual braking system, three roller fairlead. Variable speed, hydraulically driven, dual braking system, three roller fairlead. Less
Oil Capacity 4.0 gal (US) 15.0 l Less
Weight* 3947.0 lb 1790.0 null Less
Winch Case - Width 45.6 in 1160.0 mm Less
Note (2) *Weight: Includes pump and operator controls. *Weight: Includes pump and operator controls. Less

Standards

FOPS FOPS (Falling Object Protective Structure) meets ISO 3449:2005 Level II. FOPS (Falling Object Protective Structure) meets ISO 3449:2005 Level II. Less
Note (1) Operator sound exposure Leq (equivalent sound pressure level) measured according to the work cycle procedures specified in ANSI/SAE J1166 OCT98 is 80 dB(A), for cab offered by Caterpillar, when properly installed and maintained and tested with the doors a Operator sound exposure Leq (equivalent sound pressure level) measured according to the work cycle procedures specified in ANSI/SAE J1166 OCT98 is 80 dB(A), for cab offered by Caterpillar, when properly installed and maintained and tested with the doors a Less
Note (2) Hearing protection may be needed when operating with an open operator station and cab (when not properly maintained or doors/windows open) for extended periods or in noisy environment. Hearing protection may be needed when operating with an open operator station and cab (when not properly maintained or doors/windows open) for extended periods or in noisy environment. Less
Note (3) The exterior sound pressure level for the standard machine measured at a distance of 15 m (16.4 yd) according to the test procedures specified in SAE J88 APR95, mid-gear-moving operation, is 84 dB(A). The exterior sound pressure level for the standard machine measured at a distance of 15 m (16.4 yd) according to the test procedures specified in SAE J88 APR95, mid-gear-moving operation, is 84 dB(A). Less
ROPS ROPS (Rollover Protective Structure) offered by Caterpillar for the machine meets ROPS criteria ISO 3471:2008. ROPS (Rollover Protective Structure) offered by Caterpillar for the machine meets ROPS criteria ISO 3471:2008. Less
Customer Stories

Discover what’s new and how customers like you are benefiting from our products and services. Check back often for updates.

Learn More
Promotions

Looking for that perfect piece of used equipment to complement your fleet? Check out our Used Exclusives, featuring new machines every week!

Learn More
Social

Let’s talk. Connect with us on one of our social channels to start the conversation and see what we’re up to.

Learn More
Branch Locator

Looking for your nearest branch? Get in touch with us today by contacting one of our branches directly. We’re always ready to help.

Learn More
Services

When you choose Finning, you have a wide array of support and specialty services to help you get the most from your equipment.

Learn More
Technology

Integrated technology can help you understand your equipment's output and help extend its lifespan.

Learn More
Finance

Choose from a range of financing solutions that allow you to purchase equipment, parts, services, and technology when you need it.

Learn More
*Currency conversions have been made where indicated for your convenience. You should not rely on such information as it is obtained from a third party, may not be accurate and is subject to fluctuation. Agreement regarding currency conversions, if any, will be made between you and the selling party.

Please share your feedback on Finning.com!

Close window

We are committed to providing you with the best site experience possible.  Please take our brief survey to tell us how we are doing.

Thank you in advance for your time!