View Product Downloads

Operator Station

Operator Station

Operator Station

Operator Station

Operator Station

Vertical Lift Linkage

Power Train

Power Train

Power Train





Work Tools

Work Tools

Work Tools


Customer Support

262C Standard Equipment

  • 12 volt Electrical System
  • 90 ampere Alternator
  • Ignition Key Start/Stop Switch
  • Lights: Gauge backlighting, two rear tail lights, two rear working lights, two adjustable front halogen lights, dome light.
  • Backup Alarm
  • Heavy Duty Battery, 850 CCA

  • Gauges: Fuel level, hour meter
  • Operator Warning System Indicators: Air filter restriction, alternator output, armrest raised/operator out of seat, engine coolant temperature, engine oil pressure, glow plug activation, hydraulic filter restriction, hydraulic oil temperature, parking bra
  • Vinyl seat
  • Fold-in Ergonomic Contoured Armrest
  • Control Interlock System, when operator leaves seat or armrest raised: Hydraulic system disables, hydrostatic transmission disables, parking brake engages.
  • ROPS Cab, Open, Tilt Up
  • FOPS, Level I
  • Top and Rear Windows
  • Headliner, Deluxe
  • Floor Mat
  • Interior Rear View Mirror
  • 12 volt Electric Socket
  • Horn

  • Cat C3.4 DIT Tier 3 Compliant Diesel Engine
  • Air Cleaner, Dual Element, Radial Seal
  • SOSSM Sampling Valves, Engine Oil and Hydraulic Oil
  • Filters, Spin-on, Hydraulic
  • Filters, Bayonet-type, Fuel and Water Separator
  • Tilt Up Radiator/Hydraulic Oil Cooler
  • Spring Applied, Hydraulically Released, Wet Multi Disc Parking Brake
  • Hydrostatic Transmission
  • Four Wheel Chain Drive

  • Engine Enclosure, Lockable
  • Extended Life Antifreeze, -37° C (-34° F)
  • Machine Tie Down Points (4)
  • Support, Lift Arm
  • Hydraulic Oil Level Sight Gauge
  • Radiator, Expansion Bottle
  • Cat ToughGuard™ Hose
  • Auxiliary, Hydraulics, Continuous Flow
  • Heavy Duty, Flat Faced Quick Disconnects
  • Split D-Ring to Route Work Tool Hoses Along Side of Left Lift Arm
  • Electrical Outlet, Beacon
  • Belly Pan Cleanout

  • Hydraulics, Standard or High Flow XPS
  • Quick Coupler, Mechanical or Hydraulic
  • Seat Belt, 50 mm (2 in) or 75 mm (3 in)
  • Comfort Package (must select one of the following):
  • • Open ROPS (C1): Cup Holder, Radio Ready, Suspension Seat (no heater or door)
  • • Enclosed ROPS with Heat (C2): Cup Holder, Radio Ready, Seat (choice of Suspension or Air Ride), Heater and Defroster, Side Windows, Door (either Glass or Polycarbonate)
  • • Enclosed ROPS with A/C (C3): Features of C2 Package plus Air Conditioner
  • Performance Package (must select one of the following):
  • • Performance Package 1: One Speed
  • • Performance Package 2: One Speed, Self Level
  • • Performance Package 3: Two Speed, Self Level
  • • Performance Package 4: Two Speed, Self Level, Ride Control, Advanced Machine Information and Control System (AMICS)


An industry-first sealed and pressurized cab, increased rated operating capacity, higher horsepower and superior performance help you get more done and increase your bottom line.


Engine Model Cat® C3.4 DIT Cat® C3.4 DIT Less
Net Flywheel Power 82.0 mm H2O 61.0 kg/mm Less
Gross Power 84.0 mm H2O 63.0 kg/mm Less
Gross Power - SAE J1995 84.0 mm H2O 63.0 kg/mm Less
Engine Power - ISO 14396 83.0 mm H2O 62.0 kg/mm Less
Net Power - EEC 80/1269 83.0 mm H2O 62.0 kg/mm Less
Net Power - ISO 9249 EEC 83.0 mm H2O 62.0 kg/mm Less
Net Power - SAE 1349 82.0 mm H2O 61.0 kg/mm Less
Displacement 201.0 in³ 3.3 l Less
Stroke 4.7 in 120.0 mm Less
Bore 3.7 in 94.0 mm Less


Operating Weight 7968.0 lb 3614.0 kg Less

Operating Specifications

Rated Operating Capacity 2700.0 lb 1225.0 kg Less
Rated Operating Capacity with Optional Counterweight 2945.0 lb 1336.0 kg Less
Tipping Load 5400.0 lb 2449.0 kg Less
Breakout Force - Tilt Cylinder 7315.0 lb 3318.0 kg Less


Wheel Base 48.8 in 1240.0 mm Less
Length - With Bucket on Ground 145.0 in 3692.0 mm Less
Length - Without Bucket 117.0 in 2979.0 mm Less
Height - Top of Cab 82.8 in 2104.0 mm Less
Vehicle Width over Tires 66.0 in 1676.0 mm Less
Maximum Overall Height 160.4 in 4075.0 mm Less
Bucket Pin Height - Maximum Lift 127.0 in 3233.0 mm Less
Bucket Pin Height - Carry Position 7.8 in 200.0 mm Less
Reach - Maximum Lift/Dump 30.7 in 781.0 mm Less
Clearance at Maximum Lift and Dump 96.4 in 2450.0 mm Less
Ground Clearance 8.8 in 225.0 mm Less
Departure Angle 26° 26° Less
Bumper Overhang - Rear Axle 42.8 in 1089.0 mm Less
Maximum Dump Angle 50° 50° Less
Turn Radius from Center - Rear 68.1 in 1730.0 mm Less
Turn Radius from Center - Coupler 54.6 in 1386.0 mm Less
Turn Radius from Center - Bucket 85.3 in 2167.0 mm Less
Maximum Reach - With Arms Parallel 50.5 in 1283.0 mm Less
Rack Back Angle - Maximum Height 85° 85° Less
Bucket Pin Reach - Maximum Lift 14.7 in 373.0 mm Less

Hydraulic System

Maximum Loader Hydraulic Pressure 4061.0 psi 28000.0 kPa Less
Maximum Loader Hydraulic Flow 33.0 gal/min 125.0 l/min Less
Hydraulic Power 42.8 mm H2O 31.9 kg/mm Less
Hydraulic Flow (1) Standard Standard Less
Loader Hydraulic Pressure 3335.0 psi 23000.0 kPa Less
Loader Hydraulic Flow 22.0 gal/min 84.0 l/min Less
Hydraulic Flow (2) High Flow XPS High Flow XPS Less


ROPS SAE J1040 MAY94, ISO 3471:1994 SAE J1040 MAY94, ISO 3471:1994 Less
FOPS SAE J1043 SEPT87, ISO 3449:1992 Level I SAE J1043 SEPT87, ISO 3449:1992 Level I Less
FOPS Level II SAE J231 JAN81, ISO 3449:1992 Level II SAE J231 JAN81, ISO 3449:1992 Level II Less

Power Train

Travel Speed Forward 7.7 mile/h 12.5 km/h Less
Travel Speed Reverse 7.7 mile/h 12.5 km/h Less
Travel Speed Forward - 2-Speed Option 12.0 mile/h 19.3 km/h Less
Travel Speed Reverse - 2-Speed Option 12.0 mile/h 19.3 km/h Less
XDP Option Speed - With Tires 6.5 mile/h 10.4 km/h Less
XDP Option Speed - With VTS Tracks 4.8 mile/h 7.8 km/h Less

Service Refill Capacities

Chain Box - Each Side 2.6 gal (US) 10.0 l Less
Cooling System 3.7 gal (US) 14.0 l Less
Engine Crankcase 2.6 gal (US) 10.0 l Less
Fuel Tank 26.0 gal (US) 98.0 l Less
Hydraulic System 15.0 gal (US) 57.0 l Less
Hydraulic Tank 11.0 gal (US) 42.0 l Less
Customer Stories

Discover what’s new and how customers like you are benefiting from our products and services. Check back often for updates.

Learn More

Looking for that perfect piece of used equipment to complement your fleet? Check out our Used Exclusives, featuring new machines every week!

Learn More

Let’s talk. Connect with us on one of our social channels to start the conversation and see what we’re up to.

Learn More
Branch Locator

Looking for your nearest branch? Get in touch with us today by contacting one of our branches directly. We’re always ready to help.

Learn More

When you choose Finning, you have a wide array of support and specialty services to help you get the most from your equipment.

Learn More

Integrated technology can help you understand your equipment's output and help extend its lifespan.

Learn More

Choose from a range of financing solutions that allow you to purchase equipment, parts, services, and technology when you need it.

Learn More
*Currency conversions have been made where indicated for your convenience. You should not rely on such information as it is obtained from a third party, may not be accurate and is subject to fluctuation. Agreement regarding currency conversions, if any, will be made between you and the selling party.

Please share your feedback on!

Close window

We are committed to providing you with the best site experience possible.  Please take our brief survey to tell us how we are doing.

Thank you in advance for your time!