Menu

16M3

Select Units

Overview

The 16M3 Motor Grader will have a direct impact on mine site productivity and costs. The haul road is either the mine's greatest asset or greatest liability. When haul roads are kept in top condition, trucks live longer and run faster. Good road conditions are key on extending truck life, reducing maintenance, lowering fuel costs and reducing tire damage, as a result, cycle times are improved and more ore is produced at a lower cost. The 16M3 is ideal fit for:

  • Small to medium size mining operations which run 150 ton or smaller hauling trucks.
  • As a complement to a 24M size motor grader fleet in large mining operations where additional versatility is required for ditch and berm building and cleaning, maintenance of secondary narrower roads or side/bank slope work.
The 16M3 includes features that provide large benefits on operating cost reduction, uptime & performance improvements as well as enhanced safety.

Engine

  • Base Power (1st Gear) - Net 290.0 HP 216.0 kW
  • Engine Model Cat® C13 ACERT™ VHP Cat® C13 ACERT™ VHP
  • Bore 5.1 in 130.0 mm
  • Stroke 6.2 in 157.0 mm
  • Speed at Rated Power 2,000 rpm 2,000 rpm
  • Base Power (1st Gear) - Net - Metric 294.0 HP 216.0 kW
  • Derating Altitude - Tier 2/Stage II/Japan 2001 (Tier 2) Equivalent 12973.0 ft 3954.0 m
  • Derating Altitude - Tier 3/Stage IIIA/Japan 2006 (Tier 3) Equivalent 12176.0 ft 3711.0 m
  • Derating Altitude - Tier 4/Stage IV/Japan 2014 (Tier 4) 12500.0 ft 3810.0 m
  • Emissions (1) U.S. EPA Tier 4 Final/EU Stage IV/Japan 2014 (Tier 4 Final) U.S. EPA Tier 4 Final/EU Stage IV/Japan 2014 (Tier 4 Final)
  • Emissions (2) Tier 3/Stage IIIA/Japan 2006 (Tier 3) Equivalent Emission Standards – depending on emission standards of specific country Tier 3/Stage IIIA/Japan 2006 (Tier 3) Equivalent Emission Standards – depending on emission standards of specific country
  • Emissions (3) Tier 2/Stage II/Japan 2001 (Tier 2) Equivalent Emission Standards – depending on emission standards of specific country Tier 2/Stage II/Japan 2001 (Tier 2) Equivalent Emission Standards – depending on emission standards of specific country
  • Maximum Torque - ISO 9249 - Tier 2/Stage II/Japan 2001 (Tier 2) Equivalent 1270.0 lb/ft 1721.0 N·m
  • Maximum Torque - ISO 9249 - Tier 3/Stage IIIA/Japan 2006 (Tier 3) Equivalent 1270.0 lb/ft 1721.0 N·m
  • Maximum Torque - ISO 9249 - Tier 4/Stage IV/Japan 2014 (Tier 4) 1306.0 lb/ft 1771.0 N·m
  • Standard - Ambient Capability 122.0 °F 50.0 °C
  • Standard - Fan Speed - Maximum 1,450 rpm 1,450 rpm
  • Standard - Fan Speed - Minimum 550 rpm 550 rpm
  • Torque Rise - Tier 2/Stage II/Japan 2001 (Tier 2) Equivalent 39% 39%
  • Torque Rise - Tier 3/Stage IIIA/Japan 2006 (Tier 3) Equivalent 39% 39%
  • Torque Rise - Tier 4/Stage IV/Japan 2014 (Tier 4) 43% 43%
  • VHP Range - Net 216-259 kW (290-348 hp) 216-259 kW (290-348 hp)
  • VHP Range - Net - Metric 216-259 kW (294-353 hp) 216-259 kW (294-353 hp)
  • Optimized VHP Range - Net 216-259 kW (290-348 hp) 216-259 kW (290-348 hp)
  • Displacement 763.0 in³ 12.5 l
  • Number of Cylinders 6 6

Power Train

  • Forward/Reverse Gears 8 Forward/6 Reverse 8 Forward/6 Reverse
  • Transmission Direct drive, power shift, countershaft Direct drive, power shift, countershaft
  • Brakes - Dynamic Brake Torque per Wheel 27069.27 lb/ft 36701.0 N·m
  • Brakes - Parking Spring applied, hydraulically released Spring applied, hydraulically released
  • Brakes - Secondary Oil-actuated, oil-disc Oil-actuated, oil-disc
  • Brakes - Service Oil-actuated, oil disc Oil-actuated, oil disc

Hydraulic System

  • Circuit Type Electro-hydraulic load sensing, closed center Electro-hydraulic load sensing, closed center
  • Pump Type Variable piston Variable piston
  • Maximum System Pressure 3590.0 psi 24750.0 kPa
  • Standby Pressure 856.0 psi 5900.0 kPa
  • Note *Pump output measured at 2,150 rpm. *Pump output measured at 2,150 rpm.
  • Pump Output* 74.0 gal/min 280.0 l/min

Operating Specifications

  • Articulation Angle - Left/Right 20° 20°
  • Forward - 1st 2.8 mile/h 4.5 km/h
  • Forward - 2nd 3.8 mile/h 6.1 km/h
  • Forward - 3rd 5.5 mile/h 8.9 km/h
  • Forward - 4th 7.6 mile/h 12.3 km/h
  • Forward - 5th 11.8 mile/h 19.0 km/h
  • Forward - 6th 16.0 mile/h 25.8 km/h
  • Forward - 7th 22.0 mile/h 35.5 km/h
  • Forward - 8th 32.1 mile/h 51.7 km/h
  • Reverse - 1st 2.2 mile/h 3.6 km/h
  • Reverse - 2nd 4.1 mile/h 6.6 km/h
  • Reverse - 3rd 6.0 mile/h 9.7 km/h
  • Reverse - 4th 9.3 mile/h 15.0 km/h
  • Reverse - 5th 17.4 mile/h 28.0 km/h
  • Reverse - 6th 25.3 mile/h 40.8 km/h
  • Steering Range - Left/Right 47.5° 47.5°
  • Top Speed - Forward 32.1 mile/h 51.7 km/h
  • Top Speed - Reverse 25.4 mile/h 40.8 km/h
  • Turning Radius - Outside Front Tires 30.5 ft 9.3 m
  • Note Calculated with no slip and 23.5 R25 L-3 tires. Calculated with no slip and 23.5 R25 L-3 tires.

Service Refill

  • Fuel Capacity 131.0 gal (US) 496.0 l
  • Cooling System 18.5 gal (US) 70.0 l
  • DEF Tank 4.2 gal (US) 16.0 l
  • Hydraulic System - Tank 18.5 gal (US) 70.0 l
  • Hydraulic System - Total 38.6 gal (US) 146.0 l
  • Engine Oil 9.5 gal (US) 36.0 l
  • Transmission - Differential - Final Drives 34.0 gal (US) 98.5 l
  • Tandem Housing - Each 34.0 gal (US) 129.0 l
  • Front Wheel Spindle Bearing Housing 0.24 gal (US) 0.9 l
  • Circle Drive Housing 2.6 gal (US) 10.0 l

Frame

  • Circle - Blade Beam Thickness 2.0 in 50.0 mm
  • Circle - Diameter 71.7 in 1822.0 mm
  • Drawbar - Height 8.0 in 203.0 mm
  • Drawbar - Width 3.0 in 76.0 mm
  • Front Axle - Height to Center 26.4 in 670.0 mm
  • Front Axle - Total Oscillation per Side 35° 35°
  • Front Axle - Wheel Lean 18° Left/17° Right 18° Left/17° Right
  • Front Frame Structure - Height 18.1 in 460.0 mm
  • Front Frame Structure - Thickness 0.6 in 14.0 mm
  • Front Frame Structure - Width 14.0 in 356.0 mm

Tandems

  • Sidewall Thickness - Inner 0.9 in 22.0 mm
  • Sidewall Thickness - Outer 0.9 in 22.0 mm
  • Tandem Oscillation - Front Down 25° 25°
  • Tandem Oscillation - Front Up 15° 15°
  • Height 25.5 in 648.0 mm
  • Width 9.3 in 236.0 mm
  • Drive Chain Pitch 2.5 in 63.5 mm
  • Wheel Axle Spacing 72.5 in 1841.0 mm

Moldboard

  • Blade Width 16.0 ft 4.9 m
  • Arc Radius 16.3 in 413.0 mm
  • Throat Clearance 5.0 in 126.0 mm
  • Blade Pull* - Base GVW 41039.0 lb 18615.0 kg
  • Blade Pull* - Maximum GVW 52878.0 lb 23985.0 kg
  • Cutting Edge Thickness 1.0 in 25.0 mm
  • Cutting Edge Width 8.0 in 203.0 mm
  • Down Force - Base GVW 30743.0 lb 13945.0 kg
  • Down Force - Maximum GVW 43861.0 lb 19895.0 kg
  • End Bit - Thickness 0.75 in 19.0 mm
  • End Bit - Width 6.0 in 152.0 mm
  • Height 31.0 in 787.0 mm
  • Thickness 1.0 in 25.0 mm
  • Width 16.0 ft 4.9 m
  • Note *Blade pull calculated at 0.9 traction coefficient, which is equal to ideal no-slip conditions, and Gross Machine Weight. *Blade pull calculated at 0.9 traction coefficient, which is equal to ideal no-slip conditions, and Gross Machine Weight.

Blade Range

  • Maximum Blade Position Angle 65° 65°
  • Maximum Lift Above Ground 15.7 in 400.0 mm
  • Maximum Depth of Cut 18.5 in 470.0 mm
  • Blade Tip Range - Backward
  • Blade Tip Range - Forward 40° 40°
  • Circle Centershift - Left 27.2 in 690.0 mm
  • Circle Centershift - Right 22.0 in 560.0 mm
  • Maximum Shoulder Reach Outside of Tires - Left 91.0 in 2311.0 mm
  • Maximum Shoulder Reach Outside of Tires - Right 91.0 in 2311.0 mm
  • Moldboard Sideshift - Left 29.1 in 740.0 mm
  • Moldboard Sideshift - Right 31.1 in 790.0 mm

Ripper

  • Ripping Depth - Maximum 17.8 in 452.0 mm
  • Shank Holder Spacing - Minimum 17.5 in 445.0 mm
  • Shank Holder Spacing - Maximum 20.0 in 500.0 mm
  • Ripper Shank Holders 7 7
  • Penetration Force 30311.0 lb 13749.0 kg
  • Pry-Out Force 43700.0 lb 19822.0 kg
  • Machine Length Increase, Beam Raised 63.4 in 1610.0 mm

Weights

  • Operating Weight - Typically Equipped 71454.0 lb 32411.0 kg

Weights Tier 4/Stage IV/Japan 2014 (Tier 4 Final)*

  • Gross Vehicle Weight - Base** - Front Axle 17932.0 lb 8134.0 kg
  • Gross Vehicle Weight - Base** - Rear Axle 45596.0 lb 20682.0 kg
  • Gross Vehicle Weight - Base** - Total 63528.0 lb 28816.0 kg
  • Gross Vehicle Weight - Maximum Tested - Front Axle 26125.0 lb 11850.0 kg
  • Gross Vehicle Weight - Maximum Tested - Rear Axle 58753.0 lb 26650.0 kg
  • Gross Vehicle Weight - Maximum Tested - Total 84877.0 lb 38500.0 kg
  • Gross Vehicle Weight - Typically Equipped - Front Axle 19253.0 lb 8733.0 kg
  • Gross Vehicle Weight - Typically Equipped - Rear Axle 52201.0 lb 23678.0 kg
  • Gross Vehicle Weight - Typically Equipped - Total 71454.0 lb 32411.0 kg
  • Note (1) *For machines not equipped with Tier 4 Final emission engine, subtract 150 kg (331 lb) from rear axle weight and total weight. *For machines not equipped with Tier 4 Final emission engine, subtract 150 kg (331 lb) from rear axle weight and total weight.
  • Note (2) **Base operating weight calculated on standard machine configuration with 23.5 R25 tires, full fuel tank operator and ROPS cab. **Base operating weight calculated on standard machine configuration with 23.5 R25 tires, full fuel tank operator and ROPS cab.

Dimensions (Approximate)

  • Ground Clearance - Rear Axle 15.6 in 396.0 mm
  • Height - Exhaust Stack 140.0 in 3557.0 mm
  • Height - Front Axle Center 28.9 in 733.0 mm
  • Height - Top of Cab 146.4 in 3719.0 mm
  • Height - Top of Cylinders 121.6 in 3088.0 mm
  • Length - Between Tandem Axles 72.5 in 1841.0 mm
  • Length - Counterweight to Ripper 474.4 in 12051.0 mm
  • Length - Front Axle to Mid Tandem 290.0 in 7365.0 mm
  • Length - Front Axle to Moldboard 120.7 in 3066.0 mm
  • Length - Front Tire to Rear of Machine - Including Tow Hitch 417.0 in 10593.0 mm
  • Width - Outside Front Tires 134.3 in 3411.0 mm
  • Width - Outside Rear Tires 134.3 in 3411.0 mm
  • Width - Tire Center Lines 106.4 in 2703.0 mm

Standards

  • Brakes ISO 3450:2011 ISO 3450:2011
  • ROPS/FOPS ISO 3471:2008/ISO 3449:2005 ISO 3471:2008/ISO 3449:2005
  • Sound ISO 6394:2008/ISO 6395:2008/ISO 6396:2008 ISO 6394:2008/ISO 6395:2008/ISO 6396:2008
  • Steering ISO 5010:2007 ISO 5010:2007
  • Note (1) The dynamic spectator sound power level is 109 dB(A) for Stage IV certified configurations and 109 dB(A) for Tier 2/Stage II/Japan 2001 (Tier 2) and Tier 3/Stage IIIA/Japan 2006 (Tier 3) equivalent emission standard machines when measured according to the The dynamic spectator sound power level is 109 dB(A) for Stage IV certified configurations and 109 dB(A) for Tier 2/Stage II/Japan 2001 (Tier 2) and Tier 3/Stage IIIA/Japan 2006 (Tier 3) equivalent emission standard machines when measured according to the
  • Note (2) The dynamic operator sound pressure level is 71 dB(A) for Stage IV certified configurations and 72 dB(A) for Tier 2/Stage II/Japan 2001 (Tier 2) and Tier 3/Stage IIIA/Japan 2006 (Tier 3) equivalent emission standard machines when measured according to the The dynamic operator sound pressure level is 71 dB(A) for Stage IV certified configurations and 72 dB(A) for Tier 2/Stage II/Japan 2001 (Tier 2) and Tier 3/Stage IIIA/Japan 2006 (Tier 3) equivalent emission standard machines when measured according to the

Optional Tire Arrangements

  • Wheel Group - 19.5×25 MP (1) Tires: 23.5R25 Bridgestone VKT 2 Star Tires: 23.5R25 Bridgestone VKT 2 Star
  • Wheel Group - 19.5×25 MP (2) Tires: 23.5R25 Bridgestone VKT 1 Star Tires: 23.5R25 Bridgestone VKT 1 Star
  • Wheel Group - 19.5×25 MP (3) Tires: 23.5R25 Bridgestone VJT 1 Star Tires: 23.5R25 Bridgestone VJT 1 Star
  • Wheel Group - 19.5×25 MP (4) Tires: 23.5R25 Michelin XHA 2 Star Tires: 23.5R25 Michelin XHA 2 Star
  • Wheel Group - 19.5×25 MP (5) Tires: 23.5R25 Michelin XLDD 2 Star L5 Tires: 23.5R25 Michelin XLDD 2 Star L5

Variable Power Tier 4 Final/Stage IV/Japan 2014 (Tier 4 Final), Tier 3/Stage IIIA/Japan 2006 (Tier 3) or Tier 2/Stage II/Japan 2001 (Tier 2) - Metric

  • Gear - Forward 1st 294.0 HP 216.0 kW
  • Gear - Forward 2nd 294.0 HP 216.0 kW
  • Gear - Forward 3rd 302.0 HP 222.0 kW
  • Gear - Forward 4th 309.0 HP 227.0 kW
  • Gear - Forward 5th 315.0 HP 232.0 kW
  • Gear - Forward 6th 325.0 HP 239.0 kW
  • Gear - Forward 7th 332.0 HP 244.0 kW
  • Gear - Forward 8th 353.0 HP 259.0 kW
  • Gear - Reverse 1st 294.0 HP 216.0 kW
  • Gear - Reverse 2nd 294.0 HP 216.0 kW
  • Gear - Reverse 3rd-6th 302.0 HP 222.0 kW

Variable Power Tier 4 Final/Stage IV/Japan 2014 (Tier 4 Final), Tier 3/Stage IIIA/Japan 2006 (Tier 3) or Tier 2/Stage II/Japan 2001 (Tier 2) - Net

  • Gear - Forward 1st 290.0 HP 216.0 kW
  • Gear - Forward 2nd 290.0 HP 216.0 kW
  • Gear - Forward 3rd 298.0 HP 222.0 kW
  • Gear - Forward 4th 304.0 HP 227.0 kW
  • Gear - Forward 5th 311.0 HP 232.0 kW
  • Gear - Forward 6th 320.0 HP 239.0 kW
  • Gear - Forward 7th 328.0 HP 244.0 kW
  • Gear - Forward 8th 348.0 HP 259.0 kW
  • Gear - Reverse 1st 290.0 HP 216.0 kW
  • Gear - Reverse 2nd 290.0 HP 216.0 kW
  • Gear - Reverse 3rd-6th 298.0 HP 222.0 kW

Operating Cost Reduction

Enhanced Performance And Operator Comfort

Safety

You consider the safety of your workers a top priority, and we're doing our best to help you meet your safety goals. Caterpillar considers the safety of everyone in, on or around Cat equipment when developing new products or enhancing safety features for existing products. The 16M3 has numerous safety features such as but not limited to:

  • Access to Tandem
  • Rear View Camera
  • Seat Belt Indication
  • Access Platform – optional
  • Service Access Platform – optional
  • Fire Suppression Ready System – optional

Dealer Support Every Step Of The Way

Your local Cat dealer is committed to helping you succeed, by ensuring you have the right machine for the job, making parts available, and providing you with versatile work tools.

16M3 Standard Equipment

OPERATOR ENVIRONMENT

  • Adjustable Electric Arm rest
  • Adjustable wrist rest
  • Air conditioner with heater
  • Articulation, automatic Return-to-Center
  • Centershift pin indicator
  • Coat hook
  • Cup holder
  • Display, digital speed and gear
  • Doors, left and right side with wiper
  • Gauges (analog) inside the cab (includes fuel, articulation, engine coolant temp, engine rpm, and hydraulic oil temp)
  • Gauges, machine level
  • Information display touch screen
  • Joystick gear selection
  • Joystick hydraulic controls for implements, steering, transmission
  • Ladders, cab, left and right side
  • Lights, left and right side lights
  • Lights, night time cab
  • Meter, hour, digital
  • Mirror, inside rearview, wide angle
  • Power port, 12V
  • Radio ready, entertainment
  • ROPS cab, sound suppressed, less than 73 dB(A) ISO 6394 (70% fan speed)
  • Seat, cloth-covered, comfort air suspension
  • Storage compartments
  • Throttle control, electronic

POWER TRAIN

  • Air cleaner, dual stage dry type radial seal with service indicator through messenger and automatic dust ejector
  • Air-to-air after cooler (ATAAC)
  • Auto Diff Lock
  • Belt, serpentine, automatic tensioner
  • Brake wear indication
  • Brakes, oil disc, four-wheel, hydraulic
  • Consistent Power to ground
  • Critically Low Fluid Level Monitoring System
  • Differential, lock/unlock
  • Drain, engine oil, high speed
  • Electronic over speed protection
  • Engine ECO Mode: Tier 4 Final/Stage IV/Japan 2014 (Tier 4 Final) and Tier 2/Stage II/Japan 2001 (Tier 2) equivalent emission standards
  • Engine, compression brake
  • Ether starting aid
  • Fuel tank, fast fill, ground level
  • Fuel-water separator
  • Hydraulic Demand Fan
  • Muffler, under hood (Tier 2/Stage II/Japan 2001 (Tier 2) and Tier 3/Stage IIIA/Japan 2006 (Tier 3)
  • OK-to-Start
  • Optimized VHP
  • Parking brake – multi disc, sealed, oil-cooled
  • Priming pump, fuel
  • Rear axle, modular
  • Sediment drain, fuel tank
  • Three variations of the C13 engine with ACERT Technology. One meets U.S. EPA Tier 4 Final/EU Stage IV/Japan 2014 (Tier 4 Final) emission standards and is required for sale in higher regulated countries. The other options are capable of meeting Tier 2/Stag
  • Transmission, 8F/6R, power shift
  • VIMS no telematics

ELECTRICAL

  • Alternator, 150 ampere, sealed
  • Batteries, maintenance free, heavy duty, 1,400 CCA
  • Breaker panel
  • Electrical system, 24V
  • Lights: brake, reversing, roof-mounted roading, stop and tail (LED), work front
  • Product Link
  • Starter, electric, heavy duty

SAFETY

  • Alarm, back up
  • Ground level engine shutdown
  • Hammer (emergency exit)
  • Horn, electric
  • Lockout, hydraulic implement for roading
  • Operator not present monitoring System
  • Paint, glare reducing – top of front frame, rear enclosure an ripper cylinders
  • Rearview camera
  • Seat belt indicator
  • Seat belt, retractable 76 mm (3 in)
  • Secondary steering
  • Windows, laminated glass: – Fixed front with intermittent wiper – Door with intermittent wipers (2)
  • Windows, tempered: – Left and right side wipers – Rear with intermittent wiper

OTHER STANDARD EQUIPMENT

  • 3-Bolt blade Bracket
  • AccuGrade ARO
  • Accumulators, blade lift
  • Brake accumulators, dual certified
  • Cat Grade Control Cross Slope
  • CD ROM Parts Book
  • Clutch, circle drive slip
  • Cutting edges, curved DH-2 steel: – 203 mm × 25 mm (8 in × 1 in) – 19 mm (3∕4 in) mounting bolts
  • Doors (four), engine compartment, (two left, two right hand) locking
  • Doors, two service, left and right side
  • Drawbar – six shoe with replaceable wear strips
  • End bits, 16 mm (5∕8 in) DH-2 steel, 19 mm (3∕4 in) mounting bolts
  • Fast fill fuel, 567.8 L/min (150 gpm)
  • Fluid check
  • Frame, articulated, with safety lock
  • Hydraulics, load-sensing
  • Metallic Fuel tank, 496 L (131 gal)
  • Metallic DCM wear strips
  • Modular cooling package
  • Moldboard: – 4880 mm × 787 mm × 25 mm (16 ft × 31 in × 1 in) – Hydraulic side shift and tip
  • Radiator, two cleanout access doors
  • Rear bumper
  • Rear tandem access steps and hand bars
  • S∙O∙S ports: engine, hydraulic, transmission, coolant
  • Tandem walkway
  • Top adjust circle wear strips
  • Tow hitch (not available with ripper)

TIRES, RIMS, AND WHEELS

  • A partial allowance for tires on 597 mm × 609.6 mm (23.5 in × 24 in) multi-piece rims is included in the base machine price and weight

FLUIDS

  • Extended Life Coolant to –35° C (–31° F)

WORK TOOLS/G.E.T.

  • 4.9 m (16 ft) blade with curved cutting edge 203 mm × 25 mm (8 in × 1 in)

16M3 Optional Equipment

OPERATOR ENVIRONMENT

  • Air horn
  • Comfort package
  • Heated door
  • Mirrors high visibility
  • Mirrors, outside heated 24V
  • Mirrors, outside mounted
  • Seat heated
  • Seat heated/ventilated
  • Windows cleaning platform and ladders left-right hand side

POWER TRAIN

  • Transmission, autoshift

GUARDS

  • Debris guard
  • Front axle cylinder guard
  • Rear fenders
  • Sound suppression, engine enclosure and transmission
  • Transmission guard

ELECTRICAL

  • Light, LED, warning strobe
  • Lights front LED
  • Lights, front headlights high
  • Lights, front headlights low
  • Mounting, for warning light
  • Service lights
  • Working lights halogen
  • Working lights LED

SAFETY

  • Additional monitor for rearview camera
  • Enhanced access platform
  • Fire suppression ready
  • Machine Security System Key
  • Service access platform

OTHER ATTACHMENTS

  • Auto-lube, Centro-matic
  • Auto-lube, ripper enhancement
  • Control, blade, variable float
  • Heater, engine coolant, 120V
  • Heater, engine coolant, 240V
  • Hydraulic arrangements with additional hydraulic valves Base+1
  • Hydraulic arrangements with additional hydraulic valves Base+5
  • Product Link Elite dual
  • Rim, 495.3 mm × 635 mm (19.5 in × 25 in) MP (spare)
  • Weather, Cold Plus package

WORK TOOLS/G.E.T.

  • 4.9 m (16 ft) blade with flat cutting edge 254 mm × 35 mm (10 in × 1 3∕8 in)
  • Push block, counterweight
  • Ripper, rear
  • Tooth, ripper

FLUIDS

  • Coolant, –51° C (–60° F)

News & Events

View the latest company and product news, events and customer stories.

Promotions

View the latest offers available on a range of Cat® equipment and genuine parts.

Social Media

Connect with us to learn more about our company, products, services and customers.

Branch Locations

With branches across the UK & Ireland, you can be sure that we’re never far away.

Services

Effectively manage your equipment to reduce operating costs and improve efficiency.

Technology

Integrated technology can help you understand your equipment's output and help extend its lifespan.

Finance

Quick and easy financing with customised payment plans through Cat Financial.

Please share your feedback on Finning.com!

Close window

We are committed to providing you with the best site experience possible.  Please take our brief survey to tell us how we are doing.

Thank you in advance for your time!