Menu

Back


View Product Downloads

Overview

The new D6T dozer makes high efficiency dozing easy. A smooth-shifting, fully automatic four-speed Cat® transmission continuously optimizes the power train for the application. You save fuel and operator effort, without sacrificing durability, power or productivity. Work smarter too, with a full range of Cat Connect GRADE technology features to fit your job site needs.

Engine

Units:
Engine Model Cat C9.3 ACERT™ Cat C9.3 ACERT™ Less
Flywheel Power 215.0 hp 161.0 kW Less
Displacement 567.0 in3 9.3 L Less
Net Power (Rated) – 2,200 rpm: ISO 9249/SAE J1349 215.0 hp 161.0 kW Less
Emissions U.S. EPA Tier 4 Final/EU Stage IV/Korea Tier 4 Final U.S. EPA Tier 4 Final/EU Stage IV/Korea Tier 4 Final Less
Net Power (Rated) – 2,200 rpm: ISO 9249/SAE J1349 (DIN) 218.0 hp 160.0 kW Less
Build Number 19 19 Less
Net Power (Maximum) – 1,200 rpm: ISO 9249/SAE J1349 245.0 hp 183.0 kW Less
Net Power (Maximum) – 1,200 rpm: ISO 9249/SAE J1349 (DIN) 248.0 hp 182.0 kW Less
Note All non-road Tier 4 Interim and Final, Stage IIIB and IV, and Korea Tier 4 diesel engines are required to use only Ultra Low Sulfur Diesel (ULSD) fuels containing 15 ppm EPA/10 ppm EU (mg/kg) sulfur or less. Biodiesel blends up to B20 (20% blend by volume) are acceptable when blended with 15 ppm (mg/kg) sulfur or less ULSD. B20 should meet ASTM D7467 specification (biodiesel blend stock should meet Cat biodiesel spec, ASTM D6751 or EN 14214). Cat DEO-ULS™ or oils that meet the Cat ECF-3, API CJ-4, and ACEA E9 specification are required. Consult your OMM for further machine specific fuel recommendations. All non-road Tier 4 Interim and Final, Stage IIIB and IV, and Korea Tier 4 diesel engines are required to use only Ultra Low Sulfur Diesel (ULSD) fuels containing 15 ppm EPA/10 ppm EU (mg/kg) sulfur or less. Biodiesel blends up to B20 (20% blend by volume) are acceptable when blended with 15 ppm (mg/kg) sulfur or less ULSD. B20 should meet ASTM D7467 specification (biodiesel blend stock should meet Cat biodiesel spec, ASTM D6751 or EN 14214). Cat DEO-ULS™ or oils that meet the Cat ECF-3, API CJ-4, and ACEA E9 specification are required. Consult your OMM for further machine specific fuel recommendations. Less
Note Diesel Exhaust Fluid (DEF) used in Cat Selective Catalytic Reduction (SCR) systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241. Diesel Exhaust Fluid (DEF) used in Cat Selective Catalytic Reduction (SCR) systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241. Less
Note The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes. The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes. Less

Service Refill Capacities

Fuel Tank 97.2 gal 368.0 L Less
DEF Tank 4.5 gal 17.1 L Less

Weights

Operating Weight 47139.0 lb 21382.0 kg Less

Operating Weight

XL SU 47139.0 lb 21382.0 kg Less
XL VPAT 53043.0 lb 24060.0 kg Less
XL Fine Grading 49935.0 lb 22650.0 kg Less
XL Narrow 49780.0 lb 22580.0 kg Less
XW SU 48910.0 lb 22185.0 kg Less
XW VPAT 54046.0 lb 24515.0 kg Less
XW VPAT with foldable blade 58852.0 lb 26695.0 kg Less
LGP S 51366.0 lb 23299.0 kg Less
LGP VPAT 54527.0 lb 24733.0 kg Less
LGP VPAT with foldable blade 59333.0 lb 26913.0 kg Less
Note Operating weight includes blade, lubricants, coolant, full fuel tank, standard track, ROPS/FOPS cab, drawbar and operator. Operating weight includes blade, lubricants, coolant, full fuel tank, standard track, ROPS/FOPS cab, drawbar and operator. Less

Blades – Capacity

6 SU – XL 7.26 yd3 5.55 m3 Less
6 SU – XL Narrow* 6.47 yd3 4.95 m3 Less
6 VPAT – XL 6.07 yd3 4.64 m3 Less
6 SU – XW 7.38 yd3 5.64 m3 Less
6 VPAT – XW 6.57 yd3 5.02 m3 Less
6 VPAT – XW Foldable 7.83 yd3 5.99 m3 Less
6 S – LGP 4.96 yd3 3.79 m3 Less
6 VPAT – LGP 6.57 yd3 5.02 m3 Less
6 VPAT – LGP Foldable 7.83 yd3 5.99 m3 Less
Note *Not available in all areas. *Not available in all areas. Less

Dimensions – XL

Width of Tractor without Trunnions (standard track) 8.01 ft 2440.0 mm Less
Machine Height to Product Link Antenna(1) 10.67 ft 3253.0 mm Less
Length of Track on Ground 9.23 ft 2814.0 mm Less
Length of Basic Tractor(2) 13.81 ft 4210.0 mm Less
Ground Clearance 14.8 in 375.0 mm Less
Ground Pressure (ISO 16754)(3) 8.7 psi 59.7 kPa Less
Note (1) Height measured from ground line. Add grouser height for total dimension on hard surfaces. When Cat GRADE with 3D antennas are installed, overall machine height increases by approximately 82 mm. (1) Height measured from ground line. Add grouser height for total dimension on hard surfaces. When Cat GRADE with 3D antennas are installed, overall machine height increases by approximately 82 mm. Less
Note (2) Add 218 mm for drawbar. Add 1387 mm/1291 mm for ripper on short track roller frame and long track roller frame machines respectively. (2) Add 218 mm for drawbar. Add 1387 mm/1291 mm for ripper on short track roller frame and long track roller frame machines respectively. Less
Note (3) All dimensions above with Heavy Duty undercarriage. XL and XW with SU blade, LGP with S blade with no rear attachments unless otherwise specified and calculated per ISO 16754. (3) All dimensions above with Heavy Duty undercarriage. XL and XW with SU blade, LGP with S blade with no rear attachments unless otherwise specified and calculated per ISO 16754. Less

Dimensions – XW

Width of Tractor without Trunnions (standard track) 9.16 ft 2792.0 mm Less
Machine Height to Product Link Antenna(1) 10.67 ft 3253.0 mm Less
Length of Track on Ground 9.23 ft 2814.0 mm Less
Length of Basic Tractor(2) 13.81 ft 4210.0 mm Less
Ground Clearance 14.8 in 375.0 mm Less
Ground Pressure (ISO 16754)(3) 6.6 psi 45.8 kPa Less
Note (1) Height measured from ground line. Add grouser height for total dimension on hard surfaces. When Cat GRADE with 3D antennas are installed, overall machine height increases by approximately 82 mm. (1) Height measured from ground line. Add grouser height for total dimension on hard surfaces. When Cat GRADE with 3D antennas are installed, overall machine height increases by approximately 82 mm. Less
Note (2) Add 218 mm for drawbar. Add 1387 mm/1291 mm for ripper on short track roller frame and long track roller frame machines respectively. (2) Add 218 mm for drawbar. Add 1387 mm/1291 mm for ripper on short track roller frame and long track roller frame machines respectively. Less
Note (3) All dimensions above with Heavy Duty undercarriage. XL and XW with SU blade, LGP with S blade with no rear attachments unless otherwise specified and calculated per ISO 16754. (3) All dimensions above with Heavy Duty undercarriage. XL and XW with SU blade, LGP with S blade with no rear attachments unless otherwise specified and calculated per ISO 16754. Less

Dimensions – LGP

Width of Tractor without Trunnions (standard track) 10.5 ft 3201.0 mm Less
Machine Height to Product Link Antenna(1) 10.84 ft 3303.0 mm Less
Length of Track on Ground 10.65 ft 3245.0 mm Less
Length of Basic Tractor(2) 14.48 ft 4415.0 mm Less
Ground Clearance 16.0 in 406.0 mm Less
Ground Pressure (ISO 16754)(3) 5.1 psi 35.2 kPa Less
Note (1) Height measured from ground line. Add grouser height for total dimension on hard surfaces. When Cat GRADE with 3D antennas are installed, overall machine height increases by approximately 82 mm. (1) Height measured from ground line. Add grouser height for total dimension on hard surfaces. When Cat GRADE with 3D antennas are installed, overall machine height increases by approximately 82 mm. Less
Note (2) Add 218 mm for drawbar. Add 1387 mm/1291 mm for ripper on short track roller frame and long track roller frame machines respectively. (2) Add 218 mm for drawbar. Add 1387 mm/1291 mm for ripper on short track roller frame and long track roller frame machines respectively. Less
Note (3) All dimensions above with Heavy Duty undercarriage. XL and XW with SU blade, LGP with S blade with no rear attachments unless otherwise specified and calculated per ISO 16754. (3) All dimensions above with Heavy Duty undercarriage. XL and XW with SU blade, LGP with S blade with no rear attachments unless otherwise specified and calculated per ISO 16754. Less

Dimensions – XL VPAT

Width of Tractor without Trunnions (standard track) 8.91 ft 2717.0 mm Less
Machine Height to Product Link Antenna(1) 10.67 ft 3253.0 mm Less
Length of Track on Ground 9.23 ft 2814.0 mm Less
Length of Basic Tractor(2) 16.06 ft 4894.0 mm Less
Ground Clearance 14.8 in 375.0 mm Less
Ground Pressure (ISO 16754)(3) 9.8 psi 67.4 kPa Less
Note (1) Height measured from ground line. Add grouser height for total dimension on hard surfaces. When Cat GRADE with 3D antennas are installed, overall machine height increases by approximately 82 mm. (1) Height measured from ground line. Add grouser height for total dimension on hard surfaces. When Cat GRADE with 3D antennas are installed, overall machine height increases by approximately 82 mm. Less
Note (2) Add 218 mm for drawbar. Add 1387 mm/1291 mm for ripper on short track roller frame and long track roller frame machines respectively. (2) Add 218 mm for drawbar. Add 1387 mm/1291 mm for ripper on short track roller frame and long track roller frame machines respectively. Less
Note (3) All dimensions above with Heavy Duty undercarriage. XL and XW with SU blade, LGP with S blade with no rear attachments unless otherwise specified and calculated per ISO 16754. (3) All dimensions above with Heavy Duty undercarriage. XL and XW with SU blade, LGP with S blade with no rear attachments unless otherwise specified and calculated per ISO 16754. Less

Blades – Width

6 SU – XL 10.7 ft 3261.0 mm Less
6 SU – XL Narrow* 9.81 ft 2990.0 mm Less
6 VPAT – XL 12.75 ft 3880.0 mm Less
6 SU – XW 11.69 ft 3562.0 mm Less
6 VPAT – XW 13.65 ft 4160.0 mm Less
6 VPAT – XW Foldable 12.65 ft 3856.0 mm Less
6 S – LGP 13.33 ft 4063.0 mm Less
6 VPAT – LGP 13.65 ft 4160.0 mm Less
6 VPAT – LGP Foldable 12.65 ft 3856.0 mm Less
Note *Not available in all areas. *Not available in all areas. Less

Dimensions – XW VPAT

Width of Tractor without Trunnions (standard track) 9.83 ft 2996.0 mm Less
Machine Height to Product Link Antenna(1) 10.84 ft 3303.0 mm Less
Length of Track on Ground 10.65 ft 3245.0 mm Less
Length of Basic Tractor(2) 16.41 ft 5002.0 mm Less
Ground Clearance 16.0 in 406.0 mm Less
Ground Pressure (ISO 16754)(3) 6.9 psi 47.7 kPa Less
Note (1) Height measured from ground line. Add grouser height for total dimension on hard surfaces. When Cat GRADE with 3D antennas are installed, overall machine height increases by approximately 82 mm. (1) Height measured from ground line. Add grouser height for total dimension on hard surfaces. When Cat GRADE with 3D antennas are installed, overall machine height increases by approximately 82 mm. Less
Note (2) Add 218 mm for drawbar. Add 1387 mm/1291 mm for ripper on short track roller frame and long track roller frame machines respectively. (2) Add 218 mm for drawbar. Add 1387 mm/1291 mm for ripper on short track roller frame and long track roller frame machines respectively. Less
Note (3) All dimensions above with Heavy Duty undercarriage. XL and XW with SU blade, LGP with S blade with no rear attachments unless otherwise specified and calculated per ISO 16754. (3) All dimensions above with Heavy Duty undercarriage. XL and XW with SU blade, LGP with S blade with no rear attachments unless otherwise specified and calculated per ISO 16754. Less

Dimensions – LGP VPAT

Width of Tractor without Trunnions (standard track) 10.31 ft 3143.0 mm Less
Machine Height to Product Link Antenna(1) 10.84 ft 3303.0 mm Less
Length of Track on Ground 10.65 ft 3245.0 mm Less
Length of Basic Tractor(2) 16.41 ft 5002.0 mm Less
Ground Clearance 16.0 in 406.0 mm Less
Ground Pressure (ISO 16754)(3) 6.3 psi 43.3 kPa Less
Note (1) Height measured from ground line. Add grouser height for total dimension on hard surfaces. When Cat GRADE with 3D antennas are installed, overall machine height increases by approximately 82 mm. (1) Height measured from ground line. Add grouser height for total dimension on hard surfaces. When Cat GRADE with 3D antennas are installed, overall machine height increases by approximately 82 mm. Less
Note (2) Add 218 mm for drawbar. Add 1387 mm/1291 mm for ripper on short track roller frame and long track roller frame machines respectively. (2) Add 218 mm for drawbar. Add 1387 mm/1291 mm for ripper on short track roller frame and long track roller frame machines respectively. Less
Note (3) All dimensions above with Heavy Duty undercarriage. XL and XW with SU blade, LGP with S blade with no rear attachments unless otherwise specified and calculated per ISO 16754. (3) All dimensions above with Heavy Duty undercarriage. XL and XW with SU blade, LGP with S blade with no rear attachments unless otherwise specified and calculated per ISO 16754. Less

Dimensions – XL Fine Grading

Width of Tractor without Trunnions (standard track) 8.01 ft 2440.0 mm Less
Machine Height to Product Link Antenna(1) 10.67 ft 3253.0 mm Less
Length of Track on Ground 9.23 ft 2814.0 mm Less
Length of Basic Tractor(2) 13.81 ft 4210.0 mm Less
Ground Clearance 14.8 in 375.0 mm Less
Ground Pressure (ISO 16754)(3) 9.4 psi 64.7 kPa Less
Note (1) Height measured from ground line. Add grouser height for total dimension on hard surfaces. When Cat GRADE with 3D antennas are installed, overall machine height increases by approximately 82 mm. (1) Height measured from ground line. Add grouser height for total dimension on hard surfaces. When Cat GRADE with 3D antennas are installed, overall machine height increases by approximately 82 mm. Less
Note (2) Add 218 mm for drawbar. Add 1387 mm/1291 mm for ripper on short track roller frame and long track roller frame machines respectively. (2) Add 218 mm for drawbar. Add 1387 mm/1291 mm for ripper on short track roller frame and long track roller frame machines respectively. Less
Note (3) All dimensions above with Heavy Duty undercarriage. XL and XW with SU blade, LGP with S blade with no rear attachments unless otherwise specified and calculated per ISO 16754. (3) All dimensions above with Heavy Duty undercarriage. XL and XW with SU blade, LGP with S blade with no rear attachments unless otherwise specified and calculated per ISO 16754. Less

Dimensions – XL Narrow

Width of Tractor without Trunnions (standard track) 8.01 ft 2440.0 mm Less
Machine Height to Product Link Antenna(1) 10.67 ft 3253.0 mm Less
Length of Track on Ground 9.23 ft 2814.0 mm Less
Length of Basic Tractor(2) 13.81 ft 4210.0 mm Less
Ground Clearance 14.8 in 375.0 mm Less
Ground Pressure (ISO 16754)(3) 9.4 psi 64.5 kPa Less
Note (1) Height measured from ground line. Add grouser height for total dimension on hard surfaces. When Cat GRADE with 3D antennas are installed, overall machine height increases by approximately 82 mm. (1) Height measured from ground line. Add grouser height for total dimension on hard surfaces. When Cat GRADE with 3D antennas are installed, overall machine height increases by approximately 82 mm. Less
Note (2) Add 218 mm for drawbar. Add 1387 mm/1291 mm for ripper on short track roller frame and long track roller frame machines respectively. (2) Add 218 mm for drawbar. Add 1387 mm/1291 mm for ripper on short track roller frame and long track roller frame machines respectively. Less
Note (3) All dimensions above with Heavy Duty undercarriage. XL and XW with SU blade, LGP with S blade with no rear attachments unless otherwise specified and calculated per ISO 16754. (3) All dimensions above with Heavy Duty undercarriage. XL and XW with SU blade, LGP with S blade with no rear attachments unless otherwise specified and calculated per ISO 16754. Less

Dimensions – XW VPAT Foldable

Width of Tractor without Trunnions (standard track) 9.83 ft 2996.0 mm Less
Machine Height to Product Link Antenna(1) 10.84 ft 3303.0 mm Less
Length of Track on Ground 10.65 ft 3245.0 mm Less
Length of Basic Tractor(2) 16.41 ft 5002.0 mm Less
Ground Clearance 16.0 in 406.0 mm Less
Ground Pressure (ISO 16754)(3) 7.5 psi 52.0 kPa Less
Note (1) Height measured from ground line. Add grouser height for total dimension on hard surfaces. When Cat GRADE with 3D antennas are installed, overall machine height increases by approximately 82 mm. (1) Height measured from ground line. Add grouser height for total dimension on hard surfaces. When Cat GRADE with 3D antennas are installed, overall machine height increases by approximately 82 mm. Less
Note (2) Add 218 mm for drawbar. Add 1387 mm/1291 mm for ripper on short track roller frame and long track roller frame machines respectively. (2) Add 218 mm for drawbar. Add 1387 mm/1291 mm for ripper on short track roller frame and long track roller frame machines respectively. Less
Note (3) All dimensions above with Heavy Duty undercarriage. XL and XW with SU blade, LGP with S blade with no rear attachments unless otherwise specified and calculated per ISO 16754. (3) All dimensions above with Heavy Duty undercarriage. XL and XW with SU blade, LGP with S blade with no rear attachments unless otherwise specified and calculated per ISO 16754. Less

Dimensions – LGP VPAT Foldable

Width of Tractor without Trunnions (standard track) 10.31 ft 3143.0 mm Less
Machine Height to Product Link Antenna(1) 10.84 ft 3303.0 mm Less
Length of Track on Ground 10.65 ft 3245.0 mm Less
Length of Basic Tractor(2) 16.41 ft 5002.0 mm Less
Ground Clearance 16.0 in 406.0 mm Less
Ground Pressure (ISO 16754)(3) 6.8 psi 47.2 kPa Less
Note (1) Height measured from ground line. Add grouser height for total dimension on hard surfaces. When Cat GRADE with 3D antennas are installed, overall machine height increases by approximately 82 mm. (1) Height measured from ground line. Add grouser height for total dimension on hard surfaces. When Cat GRADE with 3D antennas are installed, overall machine height increases by approximately 82 mm. Less
Note (2) Add 218 mm for drawbar. Add 1387 mm/1291 mm for ripper on short track roller frame and long track roller frame machines respectively. (2) Add 218 mm for drawbar. Add 1387 mm/1291 mm for ripper on short track roller frame and long track roller frame machines respectively. Less
Note (3) All dimensions above with Heavy Duty undercarriage. XL and XW with SU blade, LGP with S blade with no rear attachments unless otherwise specified and calculated per ISO 16754. (3) All dimensions above with Heavy Duty undercarriage. XL and XW with SU blade, LGP with S blade with no rear attachments unless otherwise specified and calculated per ISO 16754. Less

Performance

  • New, fully automatic four-speed lock-up clutch transmission continuously optimizes gear and engine speed for the application without added operator input.
  • Added gear between first and second, and seamless lock-up clutch engagement, for exceptionally smooth shifting.
  • Maintains power to the ground through load changes for an aggressive feel in the dirt.
  • Up to 2.5 percent more productive – move more material per hour.*
  • Faster implement response*, especially with GRADE technologies.
  • Versatility – pushing power you want for heavy dozing and the fine control you need for finish grading – all in one easy-to-transport machine.
*Compared to previous model.

Efficiency

  • Full-time Auto Shift for significantly better fuel efficiency with less operator effort – without sacrificing performance.
  • Up to 20 percent more fuel efficient* – as much as 30 percent better in lighter load finish grading applications.
  • Sustainable: fuel savings reduces CO2 production by an average of approximately 16.6 metric tons per year.
*Compared to previous model.

Cat Connect Technology

  • Automatically maintain established blade position with Cat GRADE with Slope Assist (Standard). Finish jobs faster, with better surface quality and significantly less operator effort. No additional hardware required.
  • Whether production dozing or finish grading, take on 3D design plans more efficiently with Cat GRADE with 3D (Optional). Factory integrated grade control system features cab roof-mounted GNSS antennas to eliminate blade masts and cables. Includes AutoCarry™ to further boost productivity.
  • Versatile, scalable Cat AccuGrade™ (Optional) is a dealer-installed grade control system. Choice of Laser, Global Navigation Satellite System (GNSS) or Universal Total Station (UTS) so you get the right level of accuracy to match your job requirements.
  • Factory equip your dozer for easy installation of an AccuGrade system with the AccuGrade Ready Option (ARO) (Optional).
  • Manage your fleet more effectively and profitably with Product Link™/VisionLink® remote monitoring.

Ease of Operation

  • Change ground speeds easily – in large (half gear) or small (one-tenth gear) increments – with detented thumb roller.
  • New Liquid Crystal Display (LCD) places machine data, settings menus, grade control data and more conveniently in front of the operator.
  • Display enables coded start and operator profiles.
  • Improved blade feedback with updated implement joystick.
  • More ground clearance and better penetration with new high-lift, multi-shank ripper.
  • Easier transport with available narrow blade/push arms on D6T XL, or foldable blade on XW/LGP VPAT tractors.

News & Events

View the latest company and product news, events and customer stories.

Learn More
Promotions

View the latest offers available on a range of Cat® equipment and genuine parts.

Learn More
Social Media

Connect with us to learn more about our company, products, services and customers.

Learn More
Branch Locations

With branches across the UK & Ireland, you can be sure that we’re never far away.

Learn More
Services

Effectively manage your equipment to reduce operating costs and improve efficiency.

Learn More
Technology

Integrated technology can help you understand your equipment's output and help extend its lifespan.

Learn More
Finance

Quick and easy financing with customised payment plans through Cat Financial.

Learn More