Menu

Back


View Product Downloads

G3512E Standard Equipment

Air Inlet

Control Panels
  • Kilowatt transducer (ship loose)

Cooling
  • ANSI/DN customer flange connections for JW inlet and outlet
  • Cat flanges on SCAC circuit
  • JW thermostats

Exhaust
  • Dry exhaust manifolds, insulated and shielded
  • Center section cooled turbocharger with Cat flanged outlet
  • Individual exhaust port and turbocharger outlet wired to Integrated Temperature Sensing Module (ITSM) with GECM providing alarms and shutdowns

Fuel system
  • Electronic fuel metering valve
  • Throttle plate, 24V DC actuator, controlled by GECM
  • Fuel system is sized for 31.5 to 47.2 MJ/NM3 dry pipeline natural gas with pressure of 10.2 to 34.5KPa to the engine fuel control valve

Generator
  • SR4B
  • Caterpillar's Digital Voltage Regulator (CDVR) with 3-phase sensing and KVAR/PF control
  • Reactive droop
  • Bus bar connections
  • Winding temperature detectors
  • Anti-condensation space heater
  • Bearing temperature detectors

Starting/Charging
  • 24V starting motors
  • Battery disconnect switch

General
  • Paint - Caterpillar Yellow except rails and radiators gloss black
  • Crankshaft vibration damper and guard
  • Operation and maintenance manuals
  • Parts book

G3512E Optional Equipment

Air Inlet
  • Air cleaner with precleaner
  • Two element, single-stage air cleaner with enclosure and service indicator

Control Panels
  • Local alarm module
  • Remote annuciator
  • Remote Communications Module (PL1000T, PL1000E)
  • Wall mount EMCP II+

Cooling
  • Inlet/Outlet connections
  • SCAC thermostats

Exhaust
  • Flange
  • Exhaust expander
  • Elbow
  • Flexible fitting

Fuel System
  • Fuel filter
  • Gas pressure regulator
  • Gas shutoff valve 24V, ETR (Energized-To-Run)

Generator
  • Low voltage extension box
  • Cable access box
  • European bus bar

Start/Charging
  • Battery charger
  • Oversized battery
  • Jacket water heater
  • Battery with cable and rack (shipped loose)

General
  • Crankcase explosion relief valve
  • Engine barring group
  • EEC D.O.I and other certifications

Overview

From natural gas-fueled combined heat and power (CHP) systems and emergency power for facilities, to renewable biogas energy to support the local grid, or electricity generated from coal mine gases, Caterpillar has a wide range of reliable gas power solutions.

Gas Generator Sets Specification

Units:
Maximum Continuous Rating 1000 ekW 1000 ekW Less
Fuel Type Natural Gas Natural Gas Less
Maximum Electrical Efficiency 42.2% 42.2% Less
Maximum Standby Rating - - Less
Frequency 50Hz 50Hz Less
rpm 1500 1500 Less

Engine Specification

Engine Model G3512E G3512E Less
Bore 6.7 in 170.0 mm Less
Stroke 7.5 in 190.0 mm Less
Displacement 3158.0 in3 52.0 L Less
Aspiration TA TA Less

Generator Set Dimension

Length 181.0 in 4594.0 mm Less
Width 65.0 in 1647.0 mm Less
Height 89.0 in 2255.0 mm Less
Dry weight genset 27475.0 lb 12460.0 kg Less

Full Range of Attachments

Wide range of bolt-on system expansion attachments, factory designed and tested Flexible packaging options for easy and cost effective installation

Proven system

World Wide Product Support

Cat dealers provide extensive post-sale support including maintenance and repair agreements. Cat dealers have over 1,800 dealer branch stores operating in 200 countries. The Caterpillar S•O•S℠ program cost effectively detects internal engine component condition, even the presence of unwanted fluids and combustion by-products

CAT® G3516C Gas Engine

Robust high speed diesel block design provides prolonged life and lower owning operationg costs. Designed for maximum performance on low pressure gaseous fuel supply. Simple open hamber combustion system for reliability and fuel flexibility. Leading edge technology in ignition system and air/fuel ratio control for lower emission and engine efficiency. One electronic control module handles all engine functions: ignition, governing, air/fuel ratio control and engine protection

Cat SR4B Generator

Designed to match performance and output characteristics of Caterpillar gas engines. Industry leading mechanical and electrical design. High efficiency

Cat EMCP II+ Control System

Simple user friendly interface and navigation. Digital monitoring, metering and protection setting. Fully-featured power metering and protective relaying. UL508A listed. Remote control and monitor capability options

News & Events

View the latest company and product news, events and customer stories.

Learn More
Promotions

View the latest offers available on a range of Cat® equipment and genuine parts.

Learn More
Social Media

Connect with us to learn more about our company, products, services and customers.

Learn More
Branch Locations

With branches across the UK & Ireland, you can be sure that we’re never far away.

Learn More
Services

Effectively manage your equipment to reduce operating costs and improve efficiency.

Learn More
Technology

Integrated technology can help you understand your equipment's output and help extend its lifespan.

Learn More
Finance

Quick and easy financing with customised payment plans through Cat Financial.

Learn More

Please share your feedback on Finning.com!

Close window

We are committed to providing you with the best site experience possible.  Please take our brief survey to tell us how we are doing.

Thank you in advance for your time!