Menu
Contact
Location
Search
No photo available

S385C

Mobile Scrap & Demolition Shears

Length 168.0 in 4260.0 mm
Jaw Depth 35.0 in 903.0 mm
Cutting Circuit - Maximum Flow 182.0 gal/min 690.0 l/min
Request A Demo

S385C Shear

Compare Models
expand / collapse icon
Length 168.0 in 4260.0 mm
Jaw Depth 35.0 in 903.0 mm
Cutting Circuit - Maximum Flow 182.0 gal/min 690.0 l/min
Width 55.0 in 1400.0 mm
Apex Force 528.0 Sh Ton 4696.0 kN
Jaw Width - Moving 6.0 in 150.0 mm
Height 84.0 in 2121.0 mm
Weight - Stick Mount 18345.0 lb 7975.0 kg
Throat Force 1405.0 Sh Ton 12509.0 kN
Jaw Opening 34.0 in 879.0 mm
Cutting Circuit - Maximum Relief Pressure 5076.0 psi 35000.0 kPa
Shear Arm Torque 2050000.0 lb/ft 2779.0 kN·m
Weight - Boom Mount 17580.0 lb 8320.0 kg
Tip Force 279.0 Sh Ton 2481.0 kN
Rotation Circuit - Maximum Relief Pressure 2030.0 psi 14000.0 kPa
Jaw Width - Fixed 18.0 in 466.0 mm
Rotation Circuit - Maximum Flow 21.0 gal/min 80.0 l/min
Cycle Time - Close 5 Seconds 5 Seconds

Bolt-On Piercing Tip

Piercing tip is bolt-on for rapid maintenance and low operating cost. Tip is fully reversible, giving two uses per set.

Jaw Design

Unique straight lower jaw design effectively enhances the cutting force by facilitating the spreading out of steel along the length of the jaw, maximizing the shear cutting force.

360-degree Rotation

Operator can spin the jaws 360 degrees in either direction to quickly position the jaws for a cut.

Reversible Knives

The four main, side and front knives are fully reversible with four effective cutting edges.

Easy Maintenance

Large access panels on the top, bottom, and sides of the shear housing make it easier to service inside components.

Protected Cylinder

Design of the shear housing provides full protection of the cylinder throughout the complete cutting cycle.

Completely Cat

Only Caterpillar offers an integrated machine-hydraulics-shear system supported by Caterpillar from front to end, throughout the life of the system.