816K Landfill Compactor | Finning CAT Canada

Benefits & Features

Efficiency and Productivity

See more

Advanced Productivity Electronic Control System (APECS)

The new APECS is designed to improve transmission shifting performance, providing a higher level of comfort for the operator and increasing productivity.

Decelerator Pedal

The left pedal acts as a brake, transmission neutralizer and an engine decelerator to override the engine speed selected by the throttle lock. This enables the operator to slow down when the throttle lock is engaged and to return to throttle lock without pressing a resume or set button again. This aids in maneuvering around trucks, tractors or any other obstacle.

Steering System

Confident machine operation starts with precise machine control enabled by the 816K's load sensing hydraulic steering system.

Increase efficiency with our variable displacement piston pumps
Achieve precise positioning for easy loading in tight areas with 42 degrees each way of steering articulation
Enhance operator comfort with integrated steering and transmission control functions

Electro Hydraulic Controls

Operators increase productivity with our responsive implements feature.

Operate comfortably through electronically controlled hydraulic cylinder stops
Handle easy-to-use soft detent controls

Structures

See more

The 816K is specifically designed and made with purpose built structures to remain safe and durable for the long run. Advanced design, materials and robotic welding contribute to increased durability and overall machine strength.

Robust Structures

Your bottom line is improved by highly durable structures that achieve multiple life cycles and withstand the toughest loading conditions.

Full box-section rear frame resists torsional shock and twisting forces
Heavy-duty steering cylinder mounts efficiently transmit steering loads into the frame
Axle mounting has been optimized for increased structural integrity

Engine and Power Train

See more

Cat Planetary Powershift Transmission

Building your success begins with a best-in-class transmission.

Consistent, smooth shifting and efficiency through integrated electronic controls that utilize Advanced Productivity Electronic Control System (APECS).
Long life and reliability through heat treat gear and metallurgy.
Two forward and two reverse speeds.

Engine and Emissions

The Cat C7.1 ACERT engine is designed for maximum fuel efficiency and increased power density. Two engine options are available to meet Tier 4 Final/Stage IV or Tier 3/Stage IIIA equivalent emission standards. This engine features innovative Cat electronics, fuel injection process, air-management systems, aftertreatment solution with Cat Selective Catalytic Reduction, and a fuel efficient regeneration system. The Cat Regeneration System automatically removes soot from the Diesel Particulate Filter without interrupting your machine's work cycle.

Efficient Systems and Components

Innovative systems intelligently lower the average working engine speeds and reduce the overall system heat loads which result in significantly improved performance and fuel efficiency.

Advanced Systems with Innovative Integration

The deep system integration of the new engine and emissions system, power train, hydraulic system and cooling system result in lower fuel consumption on average compared to previous models.

Next Generation Fuel Systems

Cat injection timing precisely controls the fuel injection process through a series of carefully timed microbursts, providing more control of combustion for the cleanest, most efficient fuel burn. On the 816K the high pressure common rail fuel systems boost performance and reduce soot for the C7.1 ACERT engine.

Cat NOx Reduction System

The Cat NOx Reduction System (NRS) captures and cools a small quantity of exhaust gas, then routes it back into the combustion chamber where it drives down combustion temperatures and reduces NOx emissions.

Aftertreatment Technologies

To meet the additional 80% reduction in NOx emissions required by Tier 4 Final/Stage IV emission standards, one new system, the Selective Catalytic Reduction (SCR), has been added to the already proven Cat Tier 4 Interim/Stage IIIB aftertreatment solution.

Wheels and Tips

See more

New Long Life Paddle and Plus Design Compactor Tips

Providing up to 40% longer life than previous offering.

Designed specifically to compliment Cat machines.

Improving machine performance!

Longer wear life
Maintaining traction

Three new wheel and tip configurations are available to meet your particular application: 1) Paddle Tip – High performance and less fuel burn with more traction and less weight. 2) Plus Tip – Traditional design for increased side slope stability. 3) Combination Tip – Both paddle and plus tips provide the best compromise of performance and fuel economy with side slope stability.

Operator Station

See more

Your operators can work more efficiently and stay comfortable with our customer-inspired cab features.

Environment

Your operator's productivity is enhanced with our clean, comfortable cab environment.

Experience reduced vibrations from isolation cab mounts and seat air suspension
Maintain desired cab temperature with automatic temperature controls
Pressurized cab with filtered air
Reduced sound levels
Convenient floor storage tray/lunch box
Footrest for additional comfort

Cat Comfort Series III Seat

Enhance comfort and help reduce operator fatigue with Cat Comfort Series III seat.

Mid back design and extra thick, contoured cushions
Air suspension system
Easy-to-reach seat levers and controls for six way adjustments
Floor-mounted implement pod and STIC™ steer provides greater stability
76 mm (3 in) wide retractable seat belt

Control Panel

Ergonomic placement of switches and information display keep your operators comfortable all day every day.

Large backlit membrane switches feature LED activation indicators
Switches feature ISO symbols for quick function identification
Two position rocker switch activates the electro hydraulic park brake

Steering and Transmission Integrated Control System (STIC)

Enter and exit the cab easily and safely with a new fold up STIC armrest.

Experience maximum responsiveness and control with STIC that combines directional selection, gear selection and steering into a single lever.

Simple side-to-side motion turns machine right or left, minimizing operator movements
Easy to operate finger controlled gear selection
Smoother, faster cycles help reduce operator fatigue through the use of low effort integrated controls

Integrated Technologies

See more

Cat Connect makes smart use of technology and services to improve your job site efficiency. Using the data from technology-equipped machines, you'll get more information and insight into your equipment and operations than ever before.

Cat Connect technologies offers improvements in these key areas: Equipment Management – increase uptime and reduce operating costs. Productivity – monitor production and manage job site efficiency. Safety – enhance job site awareness to keep your people and equipment safe.

LINK Technologies

LINK technologies wirelessly connect you to your equipment, giving you valuable insight into how your machine or fleet is performing so you can make timely, fact-based decisions that can boost job site efficiency and productivity.

Product Link™/VisionLink®

Product Link is deeply integrated into your machine, giving you access to timely information like machine location, hours, fuel usage, idle time and event codes via the online VisionLink user interface can help you effectively manage your fleet and lower operating costs.

Rear Vision Camera

A rear vision camera greatly enhances visibility behind the machine to help the operator work more productively. Work with greater confidence and at peak potential while keeping people and assets safe.

COMPACT Technologies

COMPACT technologies combine advanced compaction measurement, in-cab guidance, and reporting capabilities to help you consistently meet compaction targets fast, uniformly, in fewer passes – saving on fuel and rework.

Cat Compaction Control

The factory-installed Cat Compaction Control system uses the Cat Compaction Algorithm to measure effective compaction value and deliver real-time 3D pass mapping guidance to the cab, indicating where to work and when layers are compacted to optimum density. Pass mapping helps eliminate voids, optimize cell space, and document results. VisionLink 3D Project Monitoring provides landfill managers with detailed compaction analysis to more effectively monitor and manage their operation.

Waste Protection

See more

Guarding

Working in the toughest application, the purpose built 816K Landfill Compactor has specialized waste guarding to protect key components and systems from damage, debris, chemicals, premature wear, or wrapping of the material around components. This additional guarding includes:

Engine and Power Train Guards – Guards help prevent trash build-up and shield components.
Front Frame Guards – Front frame guards prevent trash build-up inside the frame. This guard further protects components and hydraulic lines.
Axle Wrapping and Seal Guarding – The guarding prevents material from wrapping and binding around the axles, as well as assist in ease of cleaning.
Major System Guarding and Sight Gauges – Transmission oil tube is guarded to resist damage from debris. The sight gauge for the transmission is visible from ground level. The fuel tank is positioned away from the debris in the front frame and is easily accessed.
High Radiator Air Inlet with Screen – Helps prevent trash from entering the radiator area, maintaining proper airflow and allows for debris to fall off.
Striker Bars and Optional Cleaner Fingers – Striker bars are located in front of and behind the rear wheels and behind the front wheels. Striker bars help to keep wheels free of debris to assist the wheel tips in maintaining good compaction. In cohesive material or severe packing conditions, optional cleaner fingers are available to further assist in keeping the wheel tips clean.
Extended Roof – An oversized roof extends past the cab doors and windows to minimize debris build up.
Suction Fan – Allows ambient air to cool, providing better cooling capacity. It also pressurizes the engine compartment, preventing trash build up.

Safety

See more

We are constantly improving our products in an effort to provide a safe work environment for the operator and those who work on your job site.

Machine Access

Railings, ladders and non-slip surfaces enhance technician and operator safety
Maintain three points of contact at all times through ground level or platform accessible service areas

Visibility

Rearview camera with in-cab monitor increases operator awareness around the machine
Standard cab mounted LED warning strobes

Operator Environment

Increased stability for the operator with isolated cab mounts and floor-mounted implement and steering controls
Low interior sound levels
Pressurized cab with filtered air
Standard 76 mm (3 in) seat belts on the operator seat

Sustainability

See more

Reducing the Impact to the Environment

The 816K is designed and built with sustainability in mind.

Engine Idle Shutdown can help you save fuel by avoiding unnecessary idling.
Reduce waste to the environment with our maintenance free batteries.
To assist with maximizing machine life, the Cat 816K is built for multiple lives and is one of our most rebuilt products. To get the most value from your investment, Caterpillar offers sustainable options such as our Cat Reman and Certified Rebuild programs. In these programs, remanufactured components deliver cost savings of 40 to 70 percent, which lowers your operating cost while also reducing waste and minimizing the need for raw materials.
Caterpillar offers retrofit packages to bring new features to older machines, maximizing your resource. And, when you go through the Cat Certified Rebuild program, these retrofit kits are part of the rebuild process.

Serviceability

See more

We can help you succeed by ensuring your 816K has design features to reduce your downtime.

Safe and convenient service with ground level or platform access and grouped service points.
Swing-out doors on both sides of the engine compartment provide easy access to important daily service checks.
Ecology drains for ease of service and prevention of spills.
Reduce downtime with VIMS system notifications so your operators and technicians can resolve any problems before failure.
Quick visual inspection and minimize fluid contamination with sight gauges.
Side access doors provided for cleanout of the cooling package.
A new ground level service area includes a Master Disconnect Switch with integrated lock-out/tag-out, DEF purge lamp (TIer 4 Final/Stage IV machines only), circuit breakers, emergency fuel shutoff switch and the jump start receptacle.
Centralized grease points for convenient maintenance.

Customer Support

See more

Legendary Cat Dealer Support

A valued partner, your Cat dealer is available whenever you need them.

Preventive maintenance programs and guaranteed maintenance contracts
Best-in-class parts availability
Improve your efficiency with operator training
Genuine Cat Remanufactured parts

Operating Costs

See more

Data from customer machines show Cat Landfill Compactors are among the most fuel efficient machines in the industry. Several features contribute to this excellent fuel efficiency:

ACERT Engine – Advanced engine controls maximizes power and efficiency.
Engine Idle Shutdown – Automatic engine and electrical system shutdown conserves fuel.
Advanced Productivity Electronic Control System (APECS) – All new APECS transmission controls provides greater momentum on grades and fuel savings by carrying that momentum through the shift points.
Fuel Tank Capacity minimum of 12 hours operation depending on the application.

Equipment

816K Standard Equipment

POWER TRAIN

Advanced Productivity Electronic Control Shifting (APECS)
Air to air aftercooler
Brakes, full hydraulic, enclosed, wet multiple disc service brakes
Cat clean emission module (Tier 4 Final/Stage IV only)
Electro-hydraulic parking brake
Electronic Clutch Pressure Control (ECPC)
Engine, Cat C7.1 with ACERT Technology (configured for two emissions options): – Tier 4 Final/Stage IV – Tier 3/Stage IIIA equivalent
Engine driven cooling fan (suction)
Fuel priming pump (electric)
Fuel to air cooler
Ground level engine shutoff
Muffler (under hood) (Tier 3/Stage IIIA equivalent only)
Radiator, unit core
Starting aid (ether)
Throttle lock
Transmission, planetary with 2F/2R speed range control
Torque converter

ELECTRICAL

Alarm, back-up
Alternator (150 amp)
Batteries, maintenance free
Electrical system (24 volt)
Ground level lockable master disconnect switch
Light, warning unswitched (LED strobe)
Lighting system (front and rear)
Starter, electric
Starting receptacle for emergency start

OPERATOR ENVIRONMENT

12-volt power port for mobile phone or laptop connection
AccuGrade™ mapping (ready)
Air conditioner with roof mounted condenser
Cab, sound-suppressed pressurized
Camera, rear vision
Coat and hard hat hooks
Finger tip shifting controls
Flip-up armrest
Heater and defroster
Horn, electric
Hydraulic controls – floor mounted
Implement hydraulic lockout
Instrumentation, gauges: – DEF fluid level (Tier 4 Final/Stage IV only) – Engine coolant temperature – Fuel level – Hydraulic oil temperature – Speedometer/tachometer – Torque convertor temperature
Instrumentation, warning indicators: – Action alert system, three category – Brake oil pressure – Electrical system, low voltage – Engine failure malfunction alert and action lamp – Parking brake status
Internal four-post rollover protective structure (ROPS/FOPS)
Light, (dome) cab
Lunch box and beverage holders
Mirror, internal (panoramic)
Mirrors, rearview (externally mounted)
Radio, CB ready
Radio ready for entertainment: – Antenna – Speakers – Converter (12-volt 10-15 amp)
Seat belt with minder, retractable, 76 mm (3") wide
STIC control system with lockout
Sun visor, front
Tinted glass
Transmission gear (indicator)
Vital Information Management System (VIMS): – Graphical information display – External data port – Customizable operator profiles – Event indicator light on rear grill
Wet-arm wipers/washers (front and rear): – Intermittent wipers (front and rear)

GUARDS

Guards, axle (front and rear)
Guard, cab window
Guards, crankcase and power train, hinged
Guard, driveshaft
Guard, radiator
Striker bars

FLUIDS

Antifreeze, premixed 50% concentration extended life (–34° C/–29° F)

OTHER STANDARD EQUIPMENT

DEF tank fill gauge (Tier 4 Final/Stage IV only)
Doors, service access (locking)
Ecology drains for engine, radiator, transmission, hydraulic tank
Engine, crankcase, 500 hour interval with CJ-4 oil
Emergency egress
Fire suppression ready
Fuel tank, 500 L (132 gal)
Hitch, drawbar with pin
Hoses, Cat XT™
Hydraulic, engine, and transmission oil coolers
Oil change system, high speed
Oil sampling valves
Steering, load sensing
Total hydraulic filtration system
Vandalism protection caplocks
Venturi stack

STANDARD ATTACHMENTS – OPERATOR ENVIRONMENT

Glass (window): – Standard bonded or rubber-mounted glass
Horn group (standard)
Horn group (trumpet)
Lights – cab: – Standard or LED
Mirrors – cab: – Standard or heated
Precleaner – cab: – Standard or powered
Seat – cab: – Standard or heated and ventilated

STANDARD ATTACHMENTS – POWER TRAIN

Axles: – Axle arrangement (no spin front) – Axle arrangement (no spin rear) – Axle arrangement (no spin front and rear)

STANDARD ATTACHMENTS – SPECIAL ARRANGEMENTS

Engine precleaners: – Turbine or dual stage

STANDARD ATTACHMENTS – BLADES

Dozer Arrangement – Standard (No Blade)
Dozer Arrangement – Straight Blade
Dozer Arrangement – Tilt (No Blade)

STANDARD ATTACHMENTS – TECHNOLOGY PRODUCTS

Product Link: – GSM, satellite

STANDARD ATTACHMENTS – WHEELS AND CLEANER BARS

Wheels and tips: – Wheel arrangement (6.25" plus tip) – Wheel arrangement (6.25" paddle tip) – Wheel arrangement (6.25" plus and paddle) – Wheels, chopper
Bar group – cleaner (cleaner fingers and striker bar)

816K Optional Equipment

OPERATOR ENVIRONMENT

Radio, AM/FM/AUX/USB/BLUETOOTH

FLUIDS

Antifreeze, –50° C (–58° F)

SPECIAL ARRANGEMENTS

Engine: – Sound suppression

STARTING AIDS

Heater, engine coolant, 120V
Heater, engine coolant, 240V

MISCELLANEOUS

Film (ANSI) (Tier 4 Final/Stage IV only)
EU certification (Tier 4 Final/Stage IV only)
Plate – year of manufacture (Tier 3/Stage IIIA equivalent only)

Specifications

Select Units

US
Metric

Overview

Cat Landfill Compactors are designed with durability built in, ensuring maximum availability through multiple life cycles. With optimized performance and simplified serviceability, our machines allow you to operate more efficiently and safely. Introduced in 1972, the 816 has been the industry leader for over 40 years. Focused on helping our customers succeed, we have continued to build upon each new series. The 816K continues our legacy of reliability, performance, safety, operator comfort, serviceability, and efficiency.

Engine

Gross Power 284.0 HP 212.0 kW
Net Power 248.0 HP 185.0 kW
Engine Model Cat® C7.1 ACERT™: configured for two emissions options Cat® C7.1 ACERT™: configured for two emissions options
Torque Rise 52.0 % 52.0 %
Bore 4.1 in 105.0 mm
Stroke 5.3 in 135.0 mm
Displacement 427.8 in³ 7.01 l
Emissions Meets U.S. EPA Tier 4 Final/EU Stage IV emission standards or meets U.S. EPA Tier 3/EU Stage IIIA equivalent emission standards Meets U.S. EPA Tier 4 Final/EU Stage IV emission standards or meets U.S. EPA Tier 3/EU Stage IIIA equivalent emission standards
Gross Power - ISO 14396 - Tier 4 Final/Stage IV 274.0 HP 204.0 kW
Gross Power - SAE J1995 - Tier 3/Stage IIIA Equivalent 286.0 HP 213.0 kW
Gross Power - SAE J1995 - Tier 4 Final/Stage IV 284.0 HP 212.0 kW
High Idle Speed 2270.0 r/min 2270.0 r/min
Low Idle Speed 800.0 r/min 800.0 r/min
Maximum Net Torque - 1,400 rpm - Tier 4 Final/Stage IV 899.0 lb/ft 1219.0 N·m
Rated Power (Net ISO 9249) - Tier 3/Stage IIIA equivalent 249.0 HP 186.0 kW
Rated Power (Net ISO 9249) - Tier 4 Final/Stage IV 248.0 HP 185.0 kW
Rated Power (SAE J1349) - Tier 3/Stage IIIA Equivalent 249.0 HP 186.0 kW
Rated Power (SAE J1349) - Tier 4 Final/Stage IV 248.0 HP 185.0 kW
Gross Power - ISO 14396 - Tier 3/Stage IIIA Equivalent 275.0 HP 205.0 kW
Maximum Altitude - Without Derating 9842.52 ft 3000.0 m
Maximum Net Torque - 1,400 rpm - Tier 3/Stage IIIA Equivalent 749.0 lb/ft 1016.0 N·m

Transmission

Transmission Type Planetary – Powershift – ECPC Planetary – Powershift – ECPC
Travel Speeds - Forward - First 3.8 mile/h 6.1 km/h
Travel Speeds - Forward - Second 6.8 mile/h 10.9 km/h
Travel Speeds - Reverse - First 4.3 mile/h 7.0 km/h
Travel Speeds - Reverse - Second 7.8 mile/h 12.5 km/h

Hydraulic System

Cylinders, Double Acting - Lift, Bore and Stroke 120 mm × 915 mm (4.7 in × 36.0 in) 120 mm × 915 mm (4.7 in × 36.0 in)
Main Relief Pressure 3190.0 psi 22000.0 kPa
Maximum Supply Pressure 2930.0 psi 20200.0 kPa
Pump Flow at 2,111 rpm 23.5 gal/min 89.0 l/min

Axles

Front Planetary – Fixed Planetary – Fixed
Oscillation Angle ±6° ±6°
Rear Planetary – Oscillating Planetary – Oscillating

Brakes

Parking Brake Drum and Shoe, Spring Applied, Hydraulic Released Drum and Shoe, Spring Applied, Hydraulic Released

Service Refill Capacities

Cooling System - Tier 4 Final/Stage IV 21.4 gal (US) 81.0 l
Diesel Exhaust Fluid Tank (Tier 4 Final/Stage IV Only) 4.2 gal (US) 16.0 l
Differential - Final Drives - Front 11.4 gal (US) 43.0 l
Differential - Final Drives - Rear 11.4 gal (US) 43.0 l
Engine Crankcase 5.28 gal (US) 20.0 l
Fuel Tank 132.1 gal (US) 500.0 l
Hydraulic Tank Only 19.8 gal (US) 75.0 l
Transmission 14.8 gal (US) 56.0 l
Cooling System - Tier 3/Stage IIIA Equivalent 19.3 gal (US) 73.0 l
Note All non-road Tier 4 Final and Stage IV diesel engines are required to use: – Ultra Low Sulfur Diesel (ULSD) fuels containing 15 ppm for the EPA, 10 ppm for the EU (mg/kg) sulfur or less. Biodiesel blends up to B20 are acceptable when blended with 15 ppm (mg/kg) sulfur or less ULSD and when the biodiesel feedstock meets ASTM D7467 specifications. – Cat DEO-ULS™ or oils that meet the Cat ECF-3, API CJ-4, and ACEA E9 specifications are required. – Diesel Exhaust Fluid (DEF) that meets all requirements defined in ISO 22241-1. All non-road Tier 4 Final and Stage IV diesel engines are required to use: – Ultra Low Sulfur Diesel (ULSD) fuels containing 15 ppm for the EPA, 10 ppm for the EU (mg/kg) sulfur or less. Biodiesel blends up to B20 are acceptable when blended with 15 ppm (mg/kg) sulfur or less ULSD and when the biodiesel feedstock meets ASTM D7467 specifications. – Cat DEO-ULS™ or oils that meet the Cat ECF-3, API CJ-4, and ACEA E9 specifications are required. – Diesel Exhaust Fluid (DEF) that meets all requirements defined in ISO 22241-1.

Weights

Operating Weight 56899.0 lb 25809.0 kg

Cab - Standard

Machine Sound Level (ISO 6395) Tier 3/Stage IIIA Equivalent 112.0 dB(A) 112.0 dB(A)
Machine Sound Level (ISO 6395) Tier 4 Final/Stage IV 111.0 dB(A) 111.0 dB(A)
Operator Sound Level - ISO 6396 71.0 dB(A) 71.0 dB(A)

Cab - Suppression

Operator Sound Level - ISO 6396 70.0 dB(A) 70.0 dB(A)
Machine Sound Level (ISO 6395) Tier 3/Stage IIIA Equivalent 110.0 dB(A) 110.0 dB(A)
Machine Sound Level (ISO 6395) Tier 4 Final/Stage IV 109.0 dB(A) 109.0 dB(A)

Operating Specifications

Maximum Operating Weight (Tier 4 Final/Stage IV) 56899.0 lb 25809.0 kg
Maximum Operating Weight (Tier 3/Stage IIIA equivalent) 56308.0 lb 25541.0 kg

Dimensions (Approximate)

Height - Top of Exhaust Pipe 11.5 ft 3497.0 mm
Height - Top of Hood 8.9 ft 2720.0 mm
Ground Clearance - Bumper 2.7 ft 818.0 mm
Hitch to Centerline of Front Axle 5.5 ft 1675.0 mm
Wheel Base 11.0 ft 3350.0 mm
Width - Over Wheels 131.4 ft 3338.0 mm
Centerline of Rear Axle to Bumper 6.5 ft 1990.0 mm
Height - Cab Roof 12.7 ft 3878.0 mm
Height - Top of Beacon 14.3 ft 4368.0 mm
Inside Turn Radius - Blade 9.5 ft 2910.0 mm
Inside Turn Radius - Wheels 8.9 ft 2700.0 mm
Outside Turning Radius - Blade 21.2 ft 6473.0 mm
Overall Length - Maximum 26.4 ft 8058.0 mm
Ground Clearance 1.7 ft 516.0 mm

Hydraulic System - Steering

Bore 4.0 in 101.6 mm
Maximum System Flow 147 L/min @ 2,111 rpm (38.8 gal/min @ 2,111 rpm) 147 L/min @ 2,111 rpm (38.8 gal/min @ 2,111 rpm)
Steering Pressure Limited 4003.0 psi 27600.0 kPa
Steering System - Circuit Closed Center Load Sensing Closed Center Load Sensing
Steering System - Pump Piston – Variable Displacement Piston – Variable Displacement
Stroke 23.5 in 597.0 mm
Vehicle Articulation Angle 84.0 ° 84.0 °

Blades

Height - Including Cutting Edge and Screen 6.4 ft 1961.0 mm
Maximum Depth of Cut 1.2 ft 362.0 mm
Maximum Lift Above Ground 3.7 ft 1140.0 mm
Width - Moldboard Length 11.75 ft 3580.0 mm
Width - Over End Bits 12.0 ft 3656.0 mm

Wheels

Combo Wheels - Drum Diameter 55.1 in 1400.0 mm
Combo Wheels - Drum Width 40.0 in 1016.0 mm
Combo Wheels - Outside Diameter 67.6 in 1717.0 mm
Combo Wheels - Replaceable Welded Welded
Combo Wheels - Tip Height 6.25 in 159.0 mm
Combo Wheels - Tips per Row 5 5
Combo Wheels - Tips per Wheel 20 20
Combo Wheels - Weight (Group) 13554.0 lb 6148.0 kg
Combo Wheels - Width over Drums 131.4 in 3338.0 mm
Paddle Tips - Drum Diameter 55.1 in 1400.0 mm
Paddle Tips - Drum Width 40.0 in 1016.0 mm
Paddle Tips - Outside Diameter 67.6 in 1717.0 mm
Paddle Tips - Replaceable Welded Welded
Paddle Tips - Tip Height 6.25 in 159.0 mm
Paddle Tips - Tips per Row 5 5
Paddle Tips - Tips per Wheel 20 20
Paddle Tips - Weight (Group) 13126.0 lb 5954.0 kg
Paddle Tips - Width over Drums 131.4 in 3338.0 mm
Plus Tips - Drum Diameter 55.1 in 1400.0 mm
Plus Tips - Drum Width 40.0 in 1016.0 mm
Plus Tips - Outside Diameter 67.6 in 1717.0 mm
Plus Tips - Replaceable Welded Welded
Plus Tips - Tip Height 6.25 in 159.0 mm
Plus Tips - Tips per Row 5 5
Plus Tips - Tips per Wheel 20 20
Plus Tips - Weight (Group) 13982.0 lb 6342.0 kg
Plus Tips - Width over Drums 131.4 in 3338.0 mm

816K

816K

View Product Downloads

Benefits & Features

Efficiency and Productivity

See more

Advanced Productivity Electronic Control System (APECS)

Decelerator Pedal

Steering System

Electro Hydraulic Controls

Structures

See more

Robust Structures

Engine and Power Train

See more

Cat Planetary Powershift Transmission

Engine and Emissions

Efficient Systems and Components

Advanced Systems with Innovative Integration

Next Generation Fuel Systems

Cat NOx Reduction System

Aftertreatment Technologies

Wheels and Tips

See more

New Long Life Paddle and Plus Design Compactor Tips

Operator Station

See more

Environment

Cat Comfort Series III Seat

Control Panel

Steering and Transmission Integrated Control System (STIC)

Integrated Technologies

See more

LINK Technologies

Product Link™/VisionLink®

Rear Vision Camera

COMPACT Technologies

Cat Compaction Control

Waste Protection

See more

Guarding

Safety

See more

Machine Access

Visibility

Operator Environment

Sustainability

See more

Reducing the Impact to the Environment

Serviceability

See more

We can help you succeed by ensuring your 816K has design features to reduce your downtime.

Customer Support

See more

Legendary Cat Dealer Support

Operating Costs

See more

Equipment

816K Standard Equipment

816K Optional Equipment

Specifications

Overview

Engine

Transmission

Hydraulic System

Axles

Brakes

Service Refill Capacities

Weights

Cab - Standard

Cab - Suppression

Operating Specifications

Dimensions (Approximate)

Hydraulic System - Steering

Blades

Wheels

Related Products

Attachments

Customer Stories

Promotions