Positive Amplitude Selection

Positive amplitude selection is accomplished when the spherical steel shot is repositioned inside the hollow eccentric weight. Direction of weight shaft rotation determines amplitude level.

Simplified Control

Control is simplified from the operator's station with a selection switch on the operator's console.

Reliability

The proprietary eccentric weights offer high reliability since there is no change of the high-strength spherical steel shot welding together. System reliability is superior to swinging mechanical weights and is also quieter during starts and stops.

Service Life

The proprietary eccentric weights offer long service life. There are no heavy weights to slam together and no metal fragments to contaminate the bearing lubrication system.

Engine is Turbocharged

The Caterpillar 3054C is turbocharged for top performance and efficiency even at high altitudes with no derating required up to 3000 m (9840 ft).

Adjustment-free Direct Injection Fuel System

The adjustment-free direct injection fuel system provides individually metered high-pressure, direct injection of fuel for maximum efficiency.

Engine Oil Cooler

The large engine oil cooler reduces oil deterioration and varnishing of internal components. Allows for 500 hour engine oil change intervals.

Low-mounted Oil Pump

The low-mounted oil pump allows for quicker start-up lubrication.

Fuel Filter and Water Separator

The combination fuel filter and water separator offers superior protection for the fuel injection system.

Engine Meets Emissions Standards

The engine meets U.S. EPA Tier 2 and European EU Stage II emissions control standards worldwide.

Dual Propel Pumps

The dual propel pumps provide separate, balanced flow to the rear wheel axle and the drum drive motors. Provides high gradeability and increases tractive effort in loose or poor underfoot conditions.

Limited Slip Differential

The limited slip differential provides balanced tractive effort and smooth torque transfer to both rear wheels.

Two Speed Ranges

The dual pump propel system offers two speed ranges for versatile operation. Low speed range for vibratory operation and maximum torque when climbing grades. High speed range moves the machine quickly over longer distances.

Flushing Valves

Flushing valves in each propel circuit help keep hydraulic oil cool and clean for maximum system efficiency.

High travel speed

Up to 11.5 km/h (7.1 mph).

Two Propel Pump System

The two propel pump system has dedicated pumps to drive the heavy-duty, high-torque rear wheel and drum motors independently. Should the drum or wheels begin to spin, there is always hydraulic flow to the non-spinning motor, allowing continuous tractive effort. This is especially useful in loose underfoot conditions.

Controllability

Controllability is another feature of dual propel pumps. The operator is able to stop, maintain machine position and change directions while on a grade.

Productivity

The CP-433E provides high productivity when working on more demanding grades. These machines are more effective in trench applications.

Visibility

Visibility to the tire edges and rear of machine is exceptional. The sloped hood allows the operator to see obstacles measuring 1 meter (3' 3") high located 1 meter (3' 3") to the rear of the machine. Excellent visibility in all directions increases productivity when working near obstructions or maneuvering around the job site.

Lockable Engine Hood

The lockable engine hood opens quickly and easily with the use of gas struts to provide good access to the engine, cooling system and all service points.

Sound Levels

Low sound levels for the operator and the ground crew due to the engine hood and cooling air flow through the rear mounted radiator.

Working Environment

The open platform of the CP-433E offers a spacious and comfortable working environment with all controls, levers, switches and gauges positioned to maximize productivity.

Visibility

The open platform offers unrestricted visibility to the drum and tire edge and to the side and rear of the machine.

Handrails and Foot Rests

The platform is enclosed by handrails and features foot rests for sure footing and support when working on a grade.

Standard Equipment

Standard equipment includes two front-facing and two rear-facing working lights, handrails with footrests, a lockable vandalism guard and a rear view mirror.

Steering Console and Operational Gaugess

The steering console and operational gauges are infinitely adjustable within the tilt range to the desired position of the operator. Entire console tilts for simple entrance and exit.

Single Lever Control

Single lever control for propel and vibratory On/Off provides simple and low effort operation. A padded adjustable wrist rest helps reduce operator fatigue.

Seat

The comfortable and durable seat has adjustable fore/aft position, bottom cushion height, suspension stiffness and flip-up arm rests.

Isolated Operator's Station

The operator's station is isolated with heavy-duty rubber mounts reducing machine vibration transmitted to the operator.

Rubber Floor Mat

A rubber floor mat helps further isolate the operator from machine vibration and noise.

Cab Environment

The cab is a spacious and comfortable work environment that includes large windows, more interior room with storage areas, a cup holder, better ergonomics and low noise levels.

Full-length Glass Windshield

The full-length glass windshield provides exceptional visibility to the drum and optional leveling blade.

Mirrors and Lights

Included with the cab are two exterior rear view mirrors, front and rear working lights and cab lift cylinder.

Windshield Wipers

Windshield wipers on the front and rear windows allow good vision in adverse conditions.

Side Windows

Side windows slide open for cross ventilation.

Climate Control

The cab is climate controlled with standard heater and defroster for maximum operator comfort. Optional air conditioning helps keep the cab cool and comfortable.

Padfoot Drum Pads

The padfoot drum has 108 pads welded on the drum in a chevron arrangement.

Padfoot Drum Pad Dimensions

Each pad is 90 mm (3.5") high and has a pad face surface area of 63.8 cm2 (9.9 in2) to achieve high ground contact pressure for maximum compaction.

Pads are Involuted

The pads are involuted in shape to walk out of the lift without fluffing or "kicking up" the soil around the pads. Pads are tapered to help clean themselves.

Heavy-duty Scrapers

Heavy-duty scrapers mounted on the front and rear of the drum are individually adjustable and replaceable. The scrapers help to reduce excessive material build up between the pads.

Expands Versatility and Utilization

The leveling blade expands the machines versatility and utilization for use in material knockdown, site leveling, trench backfilling and light dozing.

Blade Control

Leveling blade control is controlled by the operator's right foot to provide simple, one-handed operation of machine propel, steering and blade functions simultaneously.

Power and Tractive Effort

The dual propel pumps provide plenty of power and tractive effort for effective blade use without drum spin.

Transporting

No special permits are required for transporting with a blade width of 2.10 m (6' 11"). Blade cutting depth is 76 mm (3").

Cutting Edges

Two-piece reversible and replaceable cutting edges increase edge service life and reduce replacement costs.

High Mounting Point

The high mounting point provides superior curb and obstruction clearance.

Visual Indicators

Visual indicators allows easy check of radiator coolant, hydraulic oil tank level and air restriction indicator.

Operator's Station Tilts Forward

The operator's station tilts forward to allow convenient access to the hydraulic pumps.

Rear Mounted Cooling System

The rear mounted cooling system provides easy access for cleaning. The hydraulic oil cooler tilts rearward for additional access to the radiator.

Sealed-for-life Bearings

Sealed-for-life bearings in the articulation hitch never need to be greased.

500 hour engine oil change interval.

Lube Service

A 3 year/3000 hour vibratory bearing lube service interval reduces maintenance.

Quick Connect Hydraulic Test Ports

Quick connect hydraulic test ports simplify system diagnostics.

Ecology Drains

Ecology drains provide an environmental method to drain fluids. They are included on the radiator, engine oil pan, hydraulic and fuel tank.

S•O•S (Scheduled Oil Sampling) ports

S•O•S ports allow for simple fluid collection of engine oil, engine coolant and hydraulic oil.

Secure Hose Routing

Hose routing is secured with polyethylene routing blocks to reduce rubbing and increase service life.

Electrical System Integrity

Nylon braided wrap and all-weather connectors ensure electrical system integrity. Electrical wiring is color-coded, numbered and labeled with component identifiers to simplify troubleshooting.

Maintenance-free Caterpillar Batteries

Maintenance-free Caterpillar batteries are mounted in the rear of the machine and are protected by the engine hood. Caterpillar batteries are specifically designed for maximum cranking power and protection against vibration.

Product Link Wire-ready

The CP-433E is Product Link wire-ready. The Caterpillar Product Link System (CPLS) ensures maximum uptime and minimum repair costs by simplifying tracking of equipment fleets. The system provides automatic machine location and hour updates. The system can be obtained through your local Caterpillar dealer.