Menu

D6K2

Select Units

Overview

The D6K2 dozer is smarter and more efficient than ever. It comes equipped with GRADE technologies like Slope Assist and GRADE with 3D to make it easier for even less experienced operators to get more quality work done in less time. But intelligence is only part of the package – Eco Modes and a new power train deliver up to 17 percent more fuel efficiency, while providing superior maneuverability, faster steering response and greater capability to utilize full blade loads. This dozer also retains its optimal balance and undercarriage design for outstanding performance in finish grading applications.

Engine

  • Engine Model Cat® C4.4 with twin turbo Cat® C4.4 with twin turbo
  • Flywheel Power 130.0 HP 97.0 kW
  • Bore 4.13 in 105.0 mm
  • Stroke 4.99 in 127.0 mm
  • Displacement 268.5 in³ 4.4 l
  • Emissions U.S. EPA Tier 4 Final/EU Stage IV/Japan 2014 (Tier 4 Final)/Korea Tier 4 U.S. EPA Tier 4 Final/EU Stage IV/Japan 2014 (Tier 4 Final)/Korea Tier 4
  • Engine Power - Maximum - ISO 14396 157.0 HP 117.0 kW
  • Engine Power - Maximum - ISO 14396 (DIN) 159.0 HP 117.0 kW
  • Engine Power - Maximum - SAE J1995 160.0 HP 119.0 kW
  • Net Power (Rated) - ISO 9249 130.0 HP 97.0 kW
  • Net Power (Rated) - SAE J1349 128.0 HP 95.0 kW
  • Net Power (Rated) - ISO 9249 (DIN) 132.0 HP 97.0 kW
  • Note (1) All non road Tier 4 Interim and Final, Stage IIIB and IV, Japan 2014 (Tier 4 Final) and Korea Tier 4 diesel engines are required to use only Ultra Low Sulfur Diesel (ULSD) fuels containing 15 ppm EPA/10 ppm EU (mg/kg) sulfur or less. Biodiesel blends up to B20 (20% blend by volume) are acceptable when blended with 15 ppm (mg/kg) sulfur or less ULSD. B20 should meet ASTM D7467 specification (biodiesel blend stock should meet Cat biodiesel spec, ASTM D6751 or EN 14214). Cat DEO-ULS™ or oils that meet the Cat ECF-3, API CJ-4, and ACEA E9 specification are required. Consult your OMM for further machine specific fuel recommendations. All non road Tier 4 Interim and Final, Stage IIIB and IV, Japan 2014 (Tier 4 Final) and Korea Tier 4 diesel engines are required to use only Ultra Low Sulfur Diesel (ULSD) fuels containing 15 ppm EPA/10 ppm EU (mg/kg) sulfur or less. Biodiesel blends up to B20 (20% blend by volume) are acceptable when blended with 15 ppm (mg/kg) sulfur or less ULSD. B20 should meet ASTM D7467 specification (biodiesel blend stock should meet Cat biodiesel spec, ASTM D6751 or EN 14214). Cat DEO-ULS™ or oils that meet the Cat ECF-3, API CJ-4, and ACEA E9 specification are required. Consult your OMM for further machine specific fuel recommendations.
  • Note (2) Diesel Exhaust Fluid (DEF) used in Cat Selective Catalytic Reduction (SCR) systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241. Diesel Exhaust Fluid (DEF) used in Cat Selective Catalytic Reduction (SCR) systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241.
  • Note (3) Engine ratings at 2,200 rpm Engine ratings at 2,200 rpm
  • Note (4) Net power advertised is the power available at the engine flywheel when the engine is equipped with the air cleaner, alternator, A/C compressor at full load and cooling fan at maximum speed. Net power advertised is the power available at the engine flywheel when the engine is equipped with the air cleaner, alternator, A/C compressor at full load and cooling fan at maximum speed.
  • Note (5) No engine derating required up to 3000 m (9,840 ft) altitude; beyond 3000 m (9,840 ft) automatic derating occurs. No engine derating required up to 3000 m (9,840 ft) altitude; beyond 3000 m (9,840 ft) automatic derating occurs.

Service Refill Capacities

  • Fuel Tank 69.0 gal (US) 260.0 l
  • Cooling System 7.9 gal (US) 30.0 l
  • Engine Crankcase 2.9 gal (US) 11.0 l
  • Hydraulic Tank 16.9 gal (US) 64.0 l
  • Final Drive - Each - XL/LGP 4.9 gal (US) 18.5 l
  • DEF Tank 5.0 gal (US) 19.0 l

Weights

  • Operating Weight 29258.0 lb 13271.0 kg
  • Note (1) Operating weights: includes EROPS, A/C, lights, VPAT Dozer, transmission, drawbar, engine enclosure, 3-valve hydraulics, 100% fuel, Cat Comfort Series air suspension seat and operator. Operating weights: includes EROPS, A/C, lights, VPAT Dozer, transmission, drawbar, engine enclosure, 3-valve hydraulics, 100% fuel, Cat Comfort Series air suspension seat and operator.
  • Operating Weight - LGP 30664.0 lb 13909.0 kg
  • Operating Weight - XL 29258.0 lb 13271.0 kg
  • Shipping Weight - LGP 30058.0 lb 13634.0 kg
  • Shipping Weight - XL 28651.0 lb 12996.0 kg
  • Note (2) Shipping weights: includes EROPS, A/C, lights, VPAT Dozer, transmission, drawbar, engine enclosure, 3-valve hydraulics, 10% fuel, Cat Comfort Series air suspension seat. Shipping weights: includes EROPS, A/C, lights, VPAT Dozer, transmission, drawbar, engine enclosure, 3-valve hydraulics, 10% fuel, Cat Comfort Series air suspension seat.

Undercarriage

  • Ground Contact Area (ISO 16754) - LGP 6912.0 in² 4.46 m²
  • Ground Contact Area (ISO 16754) - XL 5070.0 in² 3.27 m²
  • Ground Pressure (ISO 16754) - LGP 4.44 psi 30.6 kPa
  • Ground Pressure (ISO 16754) - XL 5.77 psi 39.8 kPa
  • Grouser Height - ES Shoe 2.2 in 57.0 mm
  • Grouser Height - MS Shoe 1.9 in 48.0 mm
  • Shoes/Side - XL/LGP 40 40
  • Track Gauge - LGP 79.0 in 2000.0 mm
  • Track Gauge - XL 70.0 in 1770.0 mm
  • Track Rollers/Side - XL/LGP 8 8
  • Track on Ground - XL/LGP 104.0 in 2645.0 mm
  • Width - Shoe - LGP 30.0 in 760.0 mm
  • Width - Shoe - XL 22.0 in 560.0 mm

Blades

  • Blade Type VPAT, VPAT Foldable* VPAT, VPAT Foldable*
  • Blade Capacity - LGP, VPAT 4.98 yd³ 3.81 m³
  • Blade Capacity - XL, VPAT 4.26 yd³ 3.26 m³
  • Blade Width - Over End Bits - LGP, VPAT 12.0 ft 3682.0 mm
  • Blade Width - Over End Bits - XL, VPAT 10.5 ft 3196.0 mm
  • Note *VPAT foldable blades have the same capacity and width as the XL/LGP VPAT blades. *VPAT foldable blades have the same capacity and width as the XL/LGP VPAT blades.

Ripper

  • Each Additional Shank 75.0 lb 34.0 kg
  • Maximum Penetration - XL and LGP 14.2 in 360.0 mm
  • Maximum Penetration Force - LGP 10138.0 lb 45.1 kN
  • Maximum Penetration Force - XL 9480.0 lb 42.2 kN
  • Maximum Pry-out Force - LGP 37480.0 lb 166.7 kN
  • Maximum Pry-out Force - XL 37480.0 lb 166.7 kN
  • Pocket Spacing 35.3 in 896.0 mm
  • Shank Gauge 70.6 in 1792.0 mm
  • Shank Section 58.5 × 138 mm (2.3 × 5.4 in) 58.5 × 138 mm (2.3 × 5.4 in)
  • Type Fixed Parallelogram Parallelogram
  • Weight - With One Shank 1863.0 lb 845.0 kg
  • Number of Pockets 3 3
  • Overall Beam Width 76.8 in 1951.0 mm
  • Beam Cross Section 165 × 211 mm (6.5 × 8.3 in) 165 × 211 mm (6.5 × 8.3 in)

Winch

  • Cable Ferrule Size - Length 2.63 in 67.0 mm
  • Cable Ferrule Size - Outside Diameter 2.13 in 54.0 mm
  • Drum Capacity - Optional Rope 220.0 ft 67.0 m
  • Drum Capacity - Recommended Rope 306.0 ft 93.0 m
  • Maximum Bare Drum - Line Pull 50000.0 lbf 222.4 kN
  • Maximum Bare Drum - Line Speed 124.0 ft/min 38.0 m/min
  • Maximum Full Drum - Line Pull 26000.0 lbf 115.7 kN
  • Maximum Full Drum - Line Speed 230.0 ft/min 70.0 m/min
  • Optional Cable Size 0.87 in 22.0 mm
  • Rope Recommended Diameter 0.75 in 19.0 mm
  • Winch Case - Width 29.1 in 740.0 mm
  • Winch Drive Hydrostatic Hydrostatic
  • Winch Model PA50 PA50
  • Note *Weight includes: pump, operator controls, oil, mounting brackets and spacers. *Weight includes: pump, operator controls, oil, mounting brackets and spacers.
  • Weight* 2000.0 lb 907.0 kg
  • Winch and Bracket Length 33.2 in 845.0 mm
  • Drum Diameter 8.0 in 205.0 mm
  • Drum Width 11.0 in 274.0 mm
  • Flange Diameter 18.0 in 457.0 mm

Standards

  • FOPS FOPS (Falling Object Protective Structure) meets ISO 3449-2005 Level II. FOPS (Falling Object Protective Structure) meets ISO 3449-2005 Level II.
  • ROPS ROPS (Rollover Protective Structure) offered by Caterpillar for the machine meets ROPS criteria ISO 3471:2008. ROPS (Rollover Protective Structure) offered by Caterpillar for the machine meets ROPS criteria ISO 3471:2008.
  • Brakes Brakes meet the standard ISO 10265:2008. Brakes meet the standard ISO 10265:2008.

Air Conditioning System

  • Air Conditioning The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.3 kg of refrigerant which has a CO2 equivalent of 1.859 metric tonnes. The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.3 kg of refrigerant which has a CO2 equivalent of 1.859 metric tonnes.

Sustainability

  • Engine Emissions Fully complies with Tier 4 Final/Stage IV/Japan 2014 (Tier 4 Final)/Korea Tier 4 emission standards Fully complies with Tier 4 Final/Stage IV/Japan 2014 (Tier 4 Final)/Korea Tier 4 emission standards
  • Vibration Levels (1) The hand/arm vibration of this machine is below 2.5 m/s2, for an experienced operator in a dozing application. The hand/arm vibration of this machine is below 2.5 m/s2, for an experienced operator in a dozing application.
  • Vibration Levels (2) The whole body vibration information is available in Operation and Maintenance Manual SEBU8257. The whole body vibration information is available in Operation and Maintenance Manual SEBU8257.
  • Vibration Levels (3) The whole body vibration information is available in Pocket Guide HEGQ3339 “Driving Down Vibration.” The whole body vibration information is available in Pocket Guide HEGQ3339 “Driving Down Vibration.”
  • Vibration Levels (4) Operator's seat meets input “spectral class EM6” according to ISO 7096:2000. Seat has a transmissibility factor of “SEAT<0.7.” Operator's seat meets input “spectral class EM6” according to ISO 7096:2000. Seat has a transmissibility factor of “SEAT<0.7.”

Transmission - Travel Speed

  • Forward 0-10 km/h (0-6.2 mph) 0-10 km/h (0-6.2 mph)
  • Reverse 0-10 km/h (0-6.2 mph) 0-10 km/h (0-6.2 mph)
  • Transmission Type Hydrostatic Hydrostatic

Performance

  • Cat C4.4 engine with twin turbochargers is combined with a hydrostatic transmission for outstanding fuel efficiency and the most power-dense drive train in its size class.
  • Superior maneuverability, faster steering response, greater capability to utilize full blade loads.
  • Eco Modes optimize engine speed, while maintaining ground speed, saving up to 17 percent fuel compared to the previous model in lighter blade load applications like finish grading.
  • Optimized undercarriage – eight (8) bottom rollers and two (2) carrier rollers for smoother ride and excellent finish grading performance.
  • Wide blade helps get more work done in fewer passes.
  • Variable Pitch Angle Tilt (VPAT) blade for more versatility, simpler adjustment.

Cat Technology

  • Hit target grade faster and more accurately with Cat GRADE technologies – Finish jobs in fewer passes, and with less operator effort, saving you time and helping to increase your profit.
  • Cat GRADE with Slope Assist™ automatically maintains preestablished blade position without a GPS signal.
  • Updated Cat GRADE with 3D offers greater speed, accuracy and flexibility. Factory-integrated system eliminates position sensing cylinders. Antennas integrated into the cab roof for better protection. More intuitive 10-inch (254 mm) touchscreen display is easier to use.
  • AutoCarry™ automates blade lift to maximize blade load, improve load consistency, reduce track slip.
  • Cat Stable Blade works with electro-hydraulic controls to complement the operator’s blade-control input to get better finish grades faster and with less effort.
  • Cat Slope Indicate displays machine cross-slope and fore/aft orientation on the primary monitor, helping operators work more accurately on slopes.
  • Factory Attachment Ready Option (ARO) simplifies installation of all brands of grade control system.
  • Product Link™* collects machine data that can be viewed online through web and mobile applications.
  • Access information anytime, anywhere with VisionLink® – and use it to make informed decisions that boost productivity, lower costs, simplify maintenance, and improve safety and security on your job site.

Ease of Operation

  • Fast response with intuitive, precise electro-hydraulic controls. Adjust sensitivity to fine, medium or coarse.
  • Liquid Crystal Display (LCD) is easy to read – includes your Slope Assist and rear camera displays (if equipped).
  • Power Pitch option lets you easily adjust blade to optimum pitch for your application using buttons on the right hand control.
  • Automatic Traction Control reduces track slip in poor underfoot conditions.
  • Rear vision camera provides enhanced visibility.
  • Easy to transport without blade removal.

Serviceability

  • Grouped maintenance and diagnostic points, as well as ground level service and Diesel Exhaust Fluid fill access.
  • Track roller frame designed for easy cleanout.
  • Optional bracket mounts to rear of machine to keep a shovel handy.
  • Diesel Particulate Filter designed for the life of the engine – no need to clean out.

*Please consult your Cat dealer for regional availability. Not all configurations are available in all areas.

D6K2 Standard Equipment

POWER TRAIN

  • Cat C4.4 diesel engine turbocharged
  • Tier 4 Final/Stage IV/Japan 2014 (Tier 4 Final)/Korea Tier 4 Certified Engine with Aftertreatment
  • Aftercooler, Air to Air (ATAAC)
  • Glowplug starting aid
  • 3000 meter altitude operation capability without derating
  • Hydraulically driven, variable speed fan
  • Aluminum bar plate cooling system (radiator, power train, aftercooler)
  • Air cleaner with integrated precleaner, dust ejector and under hood air intake
  • Dual path, electronic control, closed-loop hydrostatic transmission
  • Electric fuel priming pump
  • Fuel/water separator
  • Automatic Traction Control
  • Programmable/selectable bi‑directional speed control
  • Engine Idle Shutdown
  • Auto Engine Speed Control

TECHNOLOGY PRODUCTS

  • Cat GRADE with Slope Assist
  • Cat Stable Blade
  • Cat Slope Indicate
  • Product Link ready cellular or satellite (Product Link licensing not available in all areas. Please consult your Cat dealer for details.)

UNDERCARRIAGE

  • SystemOne or Heavy Duty undercarriage
  • Center tread, sprocketed idler with SystemOne, standard idler with HD
  • Lifetime lubricated track rollers (8) and idlers
  • Carrier rollers (2)
  • Hydraulic track adjusters
  • Guards, front/rear guiding
  • Replaceable sprocket rim segments

HYDRAULICS

  • Three valve hydraulics
  • Load sensing hydraulics

ELECTRICAL

  • Horn
  • Back-up alarm
  • 12V converter, 10A
  • Diagnostic connector
  • Batteries, heavy duty, maintenance free, 900 CCA
  • Integrated lights (4 front, 2 rear)
  • 100 Amp alternator (24 volt)
  • 24V electric starter

OPERATOR ENVIRONMENT

  • ROPS/FOPS Cab
  • Integrated A/C with automatic temperature control
  • Seat, air suspended, cloth for cab
  • Seat belt, retractable 76 mm (3 in)
  • Foot pads, dash
  • Color graphic 178 mm (7 in)
  • Travel speed limiter, electronic
  • Engine RPM and gear display
  • Hour meter, electronic
  • Engine air cleaner service indicator, electronic
  • Water-in-fuel indicator, electronic
  • Throttle switch, rotary
  • Eco mode
  • Controls, seat mounted, fore/aft adjustment
  • Armrests, adjustable
  • Mirror, rearview, inside
  • Single pedal combining deceleration and braking functions
  • Independent forward/reverse speed settings
  • Power port, 12 volt
  • Coat hook
  • Storage compartment
  • Cup holder
  • Floor mat, rubber, heavy duty
  • Intermittent wiper
  • 12V radio ready (plug and play)

FLUIDS

  • Antifreeze coolant (–37° C/–34.6° F)
  • Extended life coolant

OTHER STANDARD EQUIPMENT

  • C-frame, variable pitch link, hydraulic cylinders and lines
  • Engine enclosures
  • Hinged radiator louvered grill
  • Swing-out radiator fan
  • Front pull device
  • Rigid drawbar
  • Vandalism protection
  • Ecology drains (engine, power train and implement oil, engine coolant)
  • Scheduled Oil Sampling (S∙O∙S) ports (engine, power train and implement oil)
  • Heavy duty crankcase guard

INSTRUCTIONS

  • Warning decals, ANSI, are included for machines in the U.S.A. only.

D6K2 Optional Equipment

POWER TRAIN

  • Fan, demand, reversing

UNDERCARRIAGE

  • XL, SystemOne
  • XL, Heavy Duty
  • LGP, SystemOne
  • LGP, Heavy Duty

TRACKS (40 SECTIONS)

  • Track Pairs, XL, SystemOne: – Track, 510 mm (20 in), Moderate Service, XL – Track, 510 mm (20 in), Extreme Service, XL – Track, 560 mm (22 in), Moderate Service, XL – Track, 560 mm (22 in), Extreme Service, XL
  • Track Pairs, XL, Heavy Duty: – Track, 510 mm (20 in), Extreme Service, XL – Track, 560 mm (22 in), Extreme Service, XL
  • Track Pairs, LGP, SystemOne: – Track, 760 mm (30 in), Moderate Service, LGP – Track, 760 mm (30 in), Extreme Service, LGP
  • Track Pairs, LGP, Heavy Duty: – Track, 760 mm (30 in), Extreme Service, LGP – Track, 760 mm (30 in), Self-Cleaning, LGP

TRACK GUIDING GUARDS

  • Guard, track guiding, center
  • Guard, track guiding, front/rear
  • Guard, track guiding, full length

OPERATOR ENVIRONMENT

  • Cab, Comfort Package
  • Cab, Comfort Package, Heavy Duty
  • Suspension seat, heated and ventilated with heated joystick handles
  • Visibility kit, single rear vision camera
  • Radio, AM/FM/AUX/USB/Bluetooth

HYDRAULICS

  • Hydraulic oil, bio

GUARDS AND PROTECTION

  • Cab, protection package
  • Screen, rear
  • Protection package, standard
  • Protection package, front
  • Protection package, heavy duty

BLADES

  • Blade, 3196 mm (126 in) ARO XL
  • Blade, 3196 mm (126 in) Foldable ARO XL
  • Blade, 3684 mm (145 in) ARO LGP
  • Blade, 3684 mm (145 in) Foldable ARO LGP
  • Mechanical blade pitch
  • Blade power pitch

REAR ATTACHMENTS

  • Drawbar
  • Ripper, straight teeth
  • Ripper, curved teeth
  • Counterweight, rear
  • Counterweight, additional slabs

REAR ATTACHMENT CONTROL

  • Ripper control
  • Winch control
  • Ripper and winch control
  • Ripper and Power Pitch control
  • Ripper, Winch and Power Pitch control

TECHNOLOGY PRODUCTS

  • AccuGrade Ready
  • Cat GRADE with 3D
  • Product Link Cellular
  • Product Link Satellite
  • Product Link Cellular and Satellite

FUEL SYSTEMS

  • Fuel tank, fast fuel and refill ready

WEATHER PACKAGES AND STARTERS

  • Cold Weather Package, 120V
  • Cold Weather Package, 240V
  • Electrical insulated breather
  • Starter standard
  • Starter high speed, low temperature

FLUIDS

  • Antifreeze, –50° C (–58° F)

ELECTRICAL

  • Beacon, rotating

FIELD INSTALLED ATTACHMENTS

  • Winch and fairleads: – PA50 winch, variable speed – Fairlead, three rollers – Kit, conversion, 4th roller – Winch step

MAINTENANCE AND RELATED ATTACHMENTS

  • Shovel holder
  • Fuel pump, refilling
  • Oil change system, high speed

Customer Stories

Discover what’s new and how customers like you are benefiting from our products and services. Check back often for updates.

Promotions

Looking for that perfect piece of used equipment to complement your fleet? Check out our Used Exclusives, featuring new machines every week!

Social

Let’s talk. Connect with us on one of our social channels to start the conversation and see what we’re up to.

Branch Locator

Looking for your nearest branch? Get in touch with us today by contacting one of our branches directly. We’re always ready to help.

Services

When you choose Finning, you have a wide array of support and specialty services to help you get the most from your equipment.

Technology

Integrated technology can help you understand your equipment's output and help extend its lifespan.

Finance

Choose from a range of financing solutions that allow you to purchase equipment, parts, services, and technology when you need it.

Please share your feedback on Finning.com!

Close window

We are committed to providing you with the best site experience possible.  Please take our brief survey to tell us how we are doing.

Thank you in advance for your time!