Menu

D6T

Select Units

Overview

The new D6T dozer makes high efficiency dozing as easy as driving your pickup truck. A smooth-shifting, fully automatic four-speed Cat® transmission continuously optimizes the power train for the application. You save fuel and operator effort, without sacrificing durability, power or productivity. Work smarter too, with a full range of Cat Connect GRADE technology features to fit your job site needs.

Engine

  • Engine Model Cat C9.3 ACERT™ Cat C9.3 ACERT™
  • Flywheel Power 215.0 HP 161.0 kW
  • Displacement 567.0 in³ 9.3 l
  • Net Power - 2,200 rpm - ISO 9249/SAE J1349 215.0 HP 161.0 kW
  • Note (2) Diesel Exhaust Fluid (DEF) used in Cat Selective Catalytic Reduction (SCR) systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241. Diesel Exhaust Fluid (DEF) used in Cat Selective Catalytic Reduction (SCR) systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241.
  • Net Power - Maximum - ISO 9249/SAE J1349 at 1,200 rpm 245.0 HP 183.0 kW
  • Emissions U.S. EPA Tier 4 Final U.S. EPA Tier 4 Final
  • Note (1) All non road Tier 4 diesel engines are required to use only Ultra Low Sulfur Diesel (ULSD) fuels containing 15 ppm (mg/kg) sulfur or less. Biodiesel blends up to B20 (20% blend by volume) are acceptable when blended with 15 ppm (mg/kg) sulfur or less ULSD. B20 should meet ASTM D7467 specification (biodiesel blend stock should meet Cat biodiesel spec, ASTM D6751 or EN 14214). Cat DEO-ULS™ or oils that meet the Cat ECF-3, API CJ-4, and ACEA E9 specification are required. Consult your OMM for further machine specific fuel recommendations. All non road Tier 4 diesel engines are required to use only Ultra Low Sulfur Diesel (ULSD) fuels containing 15 ppm (mg/kg) sulfur or less. Biodiesel blends up to B20 (20% blend by volume) are acceptable when blended with 15 ppm (mg/kg) sulfur or less ULSD. B20 should meet ASTM D7467 specification (biodiesel blend stock should meet Cat biodiesel spec, ASTM D6751 or EN 14214). Cat DEO-ULS™ or oils that meet the Cat ECF-3, API CJ-4, and ACEA E9 specification are required. Consult your OMM for further machine specific fuel recommendations.
  • Build Number 19 19

Service Refill Capacities

  • Fuel Tank 97.2 gal (US) 368.0 l
  • Cooling System 12.2 gal (US) 46.0 l
  • Engine Crankcase 6.5 gal (US) 24.6 l
  • Power Train 39.1 gal (US) 148.0 l
  • Final Drive - Each 3.6 gal (US) 13.5 l
  • Roller Frames - Each 6.6 gal (US) 25.0 l
  • Pivot Shaft Compartment 1.3 gal (US) 5.0 l
  • Hydraulic Tank 16.5 gal (US) 62.5 l
  • DEF Tank 4.5 gal (US) 17.1 l

Weights

  • Operating Weight 47138.0 lb 21382.0 kg

Operating Weights

  • LGP A 53829.0 lb 24417.0 kg
  • XW A 49797.0 lb 22588.0 kg
  • XW SU 48909.0 lb 22185.0 kg
  • XW VPAT 54045.0 lb 24515.0 kg
  • LGP S 51385.0 lb 23299.0 kg
  • XL VPAT 53042.0 lb 24060.0 kg
  • XL SU 47138.0 lb 21382.0 kg
  • XL A 47846.0 lb 21703.0 kg
  • LGP VPAT 54526.0 lb 24733.0 kg
  • Note Operating weight includes blade, lubricants, coolant, full fuel tank, standard track, ROPS/FOPS cab, drawbar and operator. Operating weight includes blade, lubricants, coolant, full fuel tank, standard track, ROPS/FOPS cab, drawbar and operator.

Blades - Capacity

  • XL A - Blade 5.17 yd³ 3.95 m³
  • XL SU - Blade 7.26 yd³ 5.55 m³
  • LGP A-Blade 6.46 yd³ 4.94 m³
  • XW SU - Blade 7.38 yd³ 5.64 m³
  • LGP S-Blade 4.96 yd³ 3.79 m³
  • XW VPAT - Blade 6.57 yd³ 5.02 m³
  • XL VPAT - Blade 6.07 yd³ 4.64 m³
  • XW A - Blade 5.69 yd³ 4.35 m³
  • LGP VPAT - Blade 6.57 yd³ 5.02 m³

Dimensions - XW VPAT

  • Ground Clearance 16.0 in 406.0 mm
  • Width - Tractor - Without Trunnions - Standard Track 9.83 ft 2996.0 mm
  • Note (2) (2) Add 218 mm (9 in) for drawbar. Add 1387 mm/1291 mm (4'7"/4'3") for ripper on short track roller frame and long track roller frame machines respectively. (2) Add 218 mm (9 in) for drawbar. Add 1387 mm/1291 mm (4'7"/4'3") for ripper on short track roller frame and long track roller frame machines respectively.
  • Ground Pressure (ISO 16754)(3) 6.92 psi 47.7 kPa
  • Machine Height - To Product Link Antenna(1) 10.83 ft 3303.0 mm
  • Length - Basic Tractor(2) 16.42 ft 5002.0 mm
  • Note (3) (3) All dimensions above with Heavy Duty undercarriage. XL and XW with SU blade, LGP with S blade with no rear attachments unless otherwise specified and calculated per ISO 16754. (3) All dimensions above with Heavy Duty undercarriage. XL and XW with SU blade, LGP with S blade with no rear attachments unless otherwise specified and calculated per ISO 16754.
  • Length - Track on Ground 10.67 ft 3245.0 mm
  • Note (1) (1) Height measured from ground line. Add grouser height for total dimension on hard surfaces. When Cat GRADE with 3D antennas are installed, overall machine height increases by approximately 82 mm (3.2 in). (1) Height measured from ground line. Add grouser height for total dimension on hard surfaces. When Cat GRADE with 3D antennas are installed, overall machine height increases by approximately 82 mm (3.2 in).

Dimensions - LGP

  • Ground Pressure (ISO 16754)(3) 5.11 psi 35.2 kPa
  • Ground Clearance 16.0 in 406.0 mm
  • Length - Track on Ground 10.67 ft 3245.0 mm
  • Length - Basic Tractor(2) 14.5 ft 4415.0 mm
  • Machine Height - To Product Link Antenna(1) 10.83 ft 3303.0 mm
  • Width - Tractor - Without Trunnions - Standard Track 10.5 ft 3201.0 mm
  • Note (3) (3) All dimensions above with Heavy Duty undercarriage. XL and XW with SU blade, LGP with S blade with no rear attachments unless otherwise specified and calculated per ISO 16754. (3) All dimensions above with Heavy Duty undercarriage. XL and XW with SU blade, LGP with S blade with no rear attachments unless otherwise specified and calculated per ISO 16754.

Dimensions - LGP VPAT

  • Note (3) (3) All dimensions above with Heavy Duty undercarriage. XL and XW with SU blade, LGP with S blade with no rear attachments unless otherwise specified and calculated per ISO 16754. (3) All dimensions above with Heavy Duty undercarriage. XL and XW with SU blade, LGP with S blade with no rear attachments unless otherwise specified and calculated per ISO 16754.
  • Ground Pressure (ISO 16754)(3) 6.28 psi 43.3 kPa
  • Machine Height - To Product Link Antenna(1) 10.83 ft 3303.0 mm
  • Note (1) (1) Height measured from ground line. Add grouser height for total dimension on hard surfaces. When Cat GRADE with 3D antennas are installed, overall machine height increases by approximately 82 mm (3.2 in). (1) Height measured from ground line. Add grouser height for total dimension on hard surfaces. When Cat GRADE with 3D antennas are installed, overall machine height increases by approximately 82 mm (3.2 in).
  • Width - Tractor - Without Trunnions - Standard Track 10.33 ft 3143.0 mm
  • Length - Track on Ground 10.67 ft 3245.0 mm
  • Length - Basic Tractor(2) 16.42 ft 5002.0 mm
  • Ground Clearance 16.0 in 406.0 mm
  • Note (2) (2) Add 218 mm (9 in) for drawbar. Add 1387 mm/1291 mm (4'7"/4'3") for ripper on short track roller frame and long track roller frame machines respectively. (2) Add 218 mm (9 in) for drawbar. Add 1387 mm/1291 mm (4'7"/4'3") for ripper on short track roller frame and long track roller frame machines respectively.

Dimensions - XW

  • Length - Track on Ground 9.25 ft 2814.0 mm
  • Machine Height - To Product Link Antenna(1) 10.67 ft 3253.0 mm
  • Ground Clearance 15.0 in 375.0 mm
  • Note (1) (1) Height measured from ground line. Add grouser height for total dimension on hard surfaces. When Cat GRADE with 3D antennas are installed, overall machine height increases by approximately 82 mm (3.2 in). (1) Height measured from ground line. Add grouser height for total dimension on hard surfaces. When Cat GRADE with 3D antennas are installed, overall machine height increases by approximately 82 mm (3.2 in).
  • Width - Tractor - Without Trunnions - Standard Track 9.17 ft 2792.0 mm
  • Note (2) (2) Add 218 mm (9 in) for drawbar. Add 1387 mm/1291 mm (4'7"/4'3") for ripper on short track roller frame and long track roller frame machines respectively. (2) Add 218 mm (9 in) for drawbar. Add 1387 mm/1291 mm (4'7"/4'3") for ripper on short track roller frame and long track roller frame machines respectively.
  • Ground Pressure (ISO 16754)(3) 6.64 psi 45.8 kPa
  • Note (3) (3) All dimensions above with Heavy Duty undercarriage. XL and XW with SU blade, LGP with S blade with no rear attachments unless otherwise specified and calculated per ISO 16754. (3) All dimensions above with Heavy Duty undercarriage. XL and XW with SU blade, LGP with S blade with no rear attachments unless otherwise specified and calculated per ISO 16754.
  • Length - Basic Tractor(2) 13.83 ft 4210.0 mm

Dimensions - XL VPAT

  • Width - Tractor - Without Trunnions - Standard Track 8.92 ft 2717.0 mm
  • Length - Track on Ground 9.25 ft 2814.0 mm
  • Ground Clearance 15.0 in 375.0 mm
  • Note (1) (1) Height measured from ground line. Add grouser height for total dimension on hard surfaces. When Cat GRADE with 3D antennas are installed, overall machine height increases by approximately 82 mm (3.2 in). (1) Height measured from ground line. Add grouser height for total dimension on hard surfaces. When Cat GRADE with 3D antennas are installed, overall machine height increases by approximately 82 mm (3.2 in).
  • Ground Pressure (ISO 16754)(3) 9.78 psi 67.4 kPa
  • Note (2) (2) Add 218 mm (9 in) for drawbar. Add 1387 mm/1291 mm (4'7"/4'3") for ripper on short track roller frame and long track roller frame machines respectively. (2) Add 218 mm (9 in) for drawbar. Add 1387 mm/1291 mm (4'7"/4'3") for ripper on short track roller frame and long track roller frame machines respectively.
  • Machine Height - To Product Link Antenna(1) 10.67 ft 3253.0 mm
  • Length - Basic Tractor(2) 16.08 ft 4894.0 mm
  • Note (3) (3) All dimensions above with Heavy Duty undercarriage. XL and XW with SU blade, LGP with S blade with no rear attachments unless otherwise specified and calculated per ISO 16754. (3) All dimensions above with Heavy Duty undercarriage. XL and XW with SU blade, LGP with S blade with no rear attachments unless otherwise specified and calculated per ISO 16754.

Blades - Width

  • XW VPAT - Blade 13.7 ft 4160.0 mm
  • XW A - Blade 14.8 ft 4520.0 mm
  • LGP A-Blade 16.6 ft 5072.0 mm
  • XL VPAT - Blade 12.7 ft 3880.0 mm
  • LGP VPAT - Blade 13.7 ft 4160.0 mm
  • LGP S-Blade 13.3 ft 4063.0 mm
  • XL SU - Blade 10.7 ft 3261.0 mm
  • XL A - Blade 13.7 ft 4160.0 mm
  • XW SU - Blade 11.7 ft 3562.0 mm

Dimensions - XL

  • Machine Height - To Product Link Antenna(1) 10.67 ft 3253.0 mm
  • Note (2) (2) Add 218 mm (9 in) for drawbar. Add 1387 mm/1291 mm (4'7"/4'3") for ripper on short track roller frame and long track roller frame machines respectively. (2) Add 218 mm (9 in) for drawbar. Add 1387 mm/1291 mm (4'7"/4'3") for ripper on short track roller frame and long track roller frame machines respectively.
  • Note (3) (3) All dimensions above with Heavy Duty undercarriage. XL and XW with SU blade, LGP with S blade with no rear attachments unless otherwise specified and calculated per ISO 16754. (3) All dimensions above with Heavy Duty undercarriage. XL and XW with SU blade, LGP with S blade with no rear attachments unless otherwise specified and calculated per ISO 16754.
  • Ground Pressure (ISO 16754)(3) 8.66 psi 59.7 kPa
  • Length - Basic Tractor(2) 13.83 ft 4210.0 mm
  • Width - Tractor - Without Trunnions - Standard Track 8.0 ft 2440.0 mm
  • Length - Track on Ground 9.25 ft 2814.0 mm
  • Ground Clearance 15.0 in 375.0 mm
  • Note (1) (1) Height measured from ground line. Add grouser height for total dimension on hard surfaces. When Cat GRADE with 3D antennas are installed, overall machine height increases by approximately 82 mm (3.2 in). (1) Height measured from ground line. Add grouser height for total dimension on hard surfaces. When Cat GRADE with 3D antennas are installed, overall machine height increases by approximately 82 mm (3.2 in).

  • Note (1) (1) Height measured from ground line. Add grouser height for total dimension on hard surfaces. When Cat GRADE with 3D antennas are installed, overall machine height increases by approximately 82 mm (3.2 in). (1) Height measured from ground line. Add grouser height for total dimension on hard surfaces. When Cat GRADE with 3D antennas are installed, overall machine height increases by approximately 82 mm (3.2 in).
  • Note (2) (2) Add 218 mm (9 in) for drawbar. Add 1387 mm/1291 mm (4'7"/4'3") for ripper on short track roller frame and long track roller frame machines respectively. (2) Add 218 mm (9 in) for drawbar. Add 1387 mm/1291 mm (4'7"/4'3") for ripper on short track roller frame and long track roller frame machines respectively.

Performance

  • New, fully automatic four-speed lock-up clutch transmission continuously optimizes gear and engine speed for the application without added operator input.
  • Added gear between first and second, and seamless lock-up clutch engagement, for exceptionally smooth shifting.
  • Maintains power to the ground through load changes for an aggressive feel in the dirt.
  • Up to 2.5 percent more productive – move more material per hour.*
  • Faster implement response*, especially with GRADE technologies.
  • Versatility – pushing power you want for heavy dozing and the fine control you need for finish grading – all in one easy-to-transport machine.
*Compared to previous model.

Efficiency

        
  • Full-time Auto Shift for significantly better fuel efficiency with less operator effort – without sacrificing performance.
  •     
  • Up to 20 percent more fuel efficient* – as much as 30 percent better in lighter load finish grading applications.
  •     
  • Sustainable: fuel savings reduces CO2 production by an average of approximately 16.6 metric tons (17.7 tons) per year.
*Compared to previous model.

Cat Connect Technology

        
  • Automatically maintain established blade mainfall/cross slope with Cat GRADE with Slope Assist (Standard). Finish jobs faster, with better surface quality and significantly less operator effort. No additional hardware required.
  •     
  • Whether production dozing or finish grading, take on 3D design plans more efficiently with Cat GRADE with 3D (Optional). Factory integrated grade control system features cab roof-mounted GNSS antennas to eliminate blade masts and cables. Includes AutoCarry™ to further boost productivity.
  •     
  • Versatile, scalable Cat AccuGrade™ (Optional) is a dealer-installed grade control system. Choice of Laser, Global Navigation Satellite System (GNSS) or Universal Total Station (UTS) so you get the right level of accuracy to match your job requirements.
  •     
  • Factory equip your dozer for easy installation of an AccuGrade system with the AccuGrade Ready Option (ARO) (Optional).
  •     
  • Manage your fleet more effectively and profitably with Product Link™/VisionLink® remote monitoring.

Ease of Operation

        
  • Change ground speeds easily – in large (half gear) or small (one-tenth gear) increments – with detented thumb roller.
  •     
  • New Liquid Crystal Display (LCD) places machine data, settings menus, grade control data and more conveniently in front of the operator.
  •     
  • Display enables coded start and operator profiles.
  •     
  • Improved blade feedback with updated implement joystick.
  •     
  • More ground clearance and better penetration with new high-lift, multi-shank ripper.

D6T Standard Equipment

Power Train

  • Coolant, extended life
  • Shift management - automatic directional and downshift controlled throttle, load compensated
  • Aftercooler, air to air (ATAAC)
  • Torque divider, lock-up
  • Transmission, electronically controlled powershift, four speed
  • Air filter with electronic service indicator
  • Turbocharger, wastegate
  • Fuel priming pump, electric
  • Final drives, single reduction planetary
  • Ecology drain
  • C9.3 ACERT diesel engine U.S. EPA Tier 4 Final certified engine with aftertreatment
  • Parking brake, electronic
  • Full Auto Shift
  • Starting aid, ether, automatic
  • Air cleaner, strata tube precleaner with dust ejection
  • Radiator, aluminum bar plate
  • Fuel water separator
  • Fan, hydraulic

Undercarriage

  • Track adjusters, hydraulic
  • Rollers, lifetime lubricated
  • Track, lifetime lubricated
  • Equalizer bar
  • Guards, end track guiding
  • Idlers, center tread
  • Track roller frames, tubular
  • Carrier rollers
  • Sprocket rim segments, replaceable
  • Clamp master link

Electrical

  • Alarm, backup
  • Alternator, brushless
  • Batteries, two maintenance free 12V (1400 cca)(24V system), heavy duty
  • Converter, two 10 amp 12V outlets
  • Connector, diagnostic
  • Starter, heavy duty, 24V
  • Horn, forward warning
  • Jacket water heater, 120V
  • Light, work, underhood

Operator Environment

  • Air conditioner, ROPS mounted
  • Armrest, adjustable
  • Cab, ROPS/FOPS, sound suppressed and pressurized
  • Cup holders
  • Decelerator and brake pedal
  • Electro-hydraulics implement and steering controls
  • 180 mm (7 in) full color LCD display: engine coolant, power train oil, and hydraulic oil temperature, fuel and DEF level and engine RPM/gear display, hours, time and slope indicate
  • Camera ready
  • Foot pads, dash
  • Heater
  • Hour meter, electronic
  • Mirror, rearview
  • Power train control module: throttle dial, electronic; manual shift mode switch; bi-directional shift dial
  • Radio, AM/FM
  • Seat, cloth, air-suspension
  • Seat belt, retractable 76 mm (3 in)
  • Wipers, two speed
  • Glove box

Technology

  • Cat GRADE with Slope Assist
  • Product Link
  • Stable blade

Other Standard Equipment

  • CD ROM parts book
  • Engine enclosures, perforated
  • Front pull device
  • Guards, hinged bottom
  • Ground level service center with remote electrical disconnect, secondary shutdown switch and hour meter
  • Hood, perforated
  • Hydraulics, independent steering, work tool and fan pumps
  • Hydrualics, load sensing, dozer lift and tilt
  • Mounting, lift cylinder
  • Oil cooler, hydraulic
  • Radiator doors, perforated, louvered, and hinged
  • SOS sampling ports
  • Vandalism protection for fluid compartments and battery box

D6T Optional Equipment

Power Train

  • Final drive, LGP
  • Final drive, LGP guarded
  • Engine, thermal shield
  • Oil change system, high speed
  • Final drive, XL VPAT
  • Final drive, XW, XW guarded
  • Final drive, XL, XL guarded
  • Precleaner, with screen

Undercarriage

  • Track Pairs (LGP Tractor, 45 Section) - Heavy Duty: 710 mm (28 in) Moderate Service; 760 mm (30 in) Extreme Service; 760 mm (30 in) Extreme Service, Trapezoidal; 915 mm (36 in) Moderate Service; 915 mm (36 in) Extreme Service, Trapezoidal; 1000 mm (39 in) Self-Clean

Hydraulics

  • Fa, autoreversing

Rear Attachment Hydraulics and Controls

  • Hydraulics, ripper
  • Controls, winch
  • No rear hydraulics
  • Ripper tooth, straight
  • Hydraulics, winch/ripper
  • Ripper tooth, curved

Starters, Batteries and Alternators

  • Alternator, 150 amp, ducted
  • Engine coolant, Arctic (-50 degrees Celcius/-58 degrees Fahrenheight)

Electrical

  • Light, warning, strobe
  • Lights: Lighting Group (6-Basic); Lighting Group (10); Lighting Group (8-Sweeps); Lighting Group (6-Basic with Screen); Lighting Group (10-Premium with Screen)
  • Light, warning, strobe with plate

Operator Environment

  • Cab, single pane, screen ready
  • Air conditioner, ROPS
  • Seat, air suspension
  • Seat, cloth, heated
  • Seat, heated and ventilated
  • Radio, AM/FM
  • Visibility Arrangement, single camera

Technology Products

  • Machine control
  • Control, basic
  • AccuGrade Ready Option (ARO)
  • Cat GRADE with 3D
  • Product Link, Cellular PLE641
  • Product Link, Satellite PLE631

Safety and Security

  • Alarm, backup
  • Alarm, backup, guarded
  • Grab handles: Basic; Heavy Duty; Heavy Duty, sweeps; VPAT; Heavy Duty, VPAT; Sweeps; Screen, rear; Screens, side; Screens, door; Rear vision camera

Fuel Systems

  • Fuel tank, fast fill

Guards

  • Bottom guards
  • Guard, bottom, sealed, heavy duty
  • Guard, chassis
  • Guard, chassis, VPAT
  • Guard, fuel tank
  • Guard, fuel tank, fast fill
  • Guard, lights
  • Seal group, high debris

Attachments

  • Rear attachments
  • No rear attachment
  • Ripper, mult-shank
  • Winch package, standard speed
  • PA56 winch pakcage, slow speed
  • Drawbar, rigid short
  • Drawbar, rigid long
  • Striker bar box, rear
  • Striker bar box, rear with hydraulics

Other Attachments

  • Striker bars, front
  • Striker bar, rear
  • Fairlead, three rollers
  • Fourth roller
  • Counterweights: Additional, Rear, Rear slab
  • Hitch, front
  • Towing device, pull-hook

Field Installed Attachments

  • PA56 winch standard and installation arrangement
  • PA56 winch slow and installation arrangement
  • Fairlead, three rollers
  • Fourth roller

Bulldozer Installation Packages

  • 6SU XL
  • 6SU XL, guarded
  • 6A XL
  • 6A XL HD
  • 6SU XW
  • 6SU XW, guarded
  • 6A XW
  • 6S LGP
  • 6S LGP, guarded
  • 6A LGP
  • VPAT XL
  • VPAT XL, GRADE with 3D
  • VPAT XW/LGP
  • VPAT XW/LGP, GRADE with 3D
  • Lift cylinders
  • Standard, XL/XW or LGP
  • GRADE, XL/XW or LGP

Blades

  • 6SU XL ARO
  • 6SU XL Landfill
  • 6A XL
  • 6SU XW ARO
  • 6SU XW, Landfill
  • 6A XW
  • 6S LGP ARO
  • 6S LGP, Landfill
  • 6A LGP

Special Arrangements

  • Waste Handling Arrangement
  • Forestry Arrangement

Customer Stories

Discover what’s new and how customers like you are benefiting from our products and services. Check back often for updates.

Promotions

Looking for that perfect piece of used equipment to complement your fleet? Check out our Used Exclusives, featuring new machines every week!

Social

Let’s talk. Connect with us on one of our social channels to start the conversation and see what we’re up to.

Branch Locator

Looking for your nearest branch? Get in touch with us today by contacting one of our branches directly. We’re always ready to help.

Services

When you choose Finning, you have a wide array of support and specialty services to help you get the most from your equipment.

Technology

Integrated technology can help you understand your equipment's output and help extend its lifespan.

Finance

Choose from a range of financing solutions that allow you to purchase equipment, parts, services, and technology when you need it.