Menu

519 SM

519 SM Standard Equipment

Motor Power Supply

  • Electric Motor, 56 kW (75 HP) @ 1800 RPM
  • 460 Volt (60 Hz) Electric Power Supply
  • Four (4) Ring High Voltage Collector Ring
  • Service Panel, NEMA 12 Enclosure
  • Pump Drive, Direct Through Flex Coupling
  • Across-the-line Magnetic Starting System
  • Turntable Power Supply Mounting

Hydraulic System

  • Three (3) In-Line Gear Pumps
  • Radial Piston Swing Motor
  • Continuous Rotation
  • Pilot Joystick Controls
  • Single Element Return (3 mic) Filtration
  • Filtration Bypass Indicators
  • Diagnostic Nipples @ Pump for serviceability

Booms

  • 8.2 m (27') Knuckleboom
  • 22.8 cm (9”) Grapple Mounting Knuckle

Structural

  • 96.5 cm x 142.2 cm (38” x 56”) Right Side Mounted Cab
  • Reverse Slope Windshield
  • Tinted Safety Glass
  • Lexan Skylight
  • Sun Visor
  • Adjustable Seat with Armrests
  • Operator Protection Guard
  • Pressurized Cab with Heater
  • Analog Gauges
  • Electronic Gauges
  • Horn
  • Windshield Wiper/Washer
  • Defroster Fan
  • Lighter
  • Dome Light
  • Circuit Breaker Panel
  • Steel Mounting

Select Units

Overview

Caterpillar has a full line of stationary mount loaders for a wide range of mill yard applications. Four models are available with onboard or remote power. Caterpillar stationary mount loaders are completely pre-wired, tested and ready for on-site electric hookup, including installation kits with the required fasteners for mounting to steel or concrete pedestals. And with the Resilient Pad Mounting system, your workday will be productive and comfortable.

Dimensions

  • Maximum Reach 32.6 ft 9.9 m

Operating Specifications

  • Knuckleboom Length 27.0 ft 8.2 m
  • Grapple Mounting Knuckle Length 9.0 in 228.6 mm
  • Swing Bearing - Diameter 43.0 in 1092.2 mm
  • Swing Bearing - Gearing External External
  • Electric Motor 75.0 HP 56.0 kW
  • Electric Power Supply 460 Volt: 60 HZ 460 Volt: 60 HZ
  • Operating Weight 15915.0 lb 7218.9 kg

Engine

  • Gross Power 75.0 HP 55.9 kW

Hydraulic System

  • Cylinders - Live Heel 127 mm X 76 mm (5 in X 3 in) 127 mm X 76 mm (5 in X 3 in)
  • Cylinders - Main 152 mm X 102 mm (6 in X 4 in) 152 mm X 102 mm (6 in X 4 in)
  • Cylinders - Stick 152 mm X 102 mm (6 in X 4 in) 152 mm X 102 mm (6 in X 4 in)
  • Hydraulic Flow 167/125/83 L/min (44/33/22 gpm) 167/125/83 L/min (44/33/22 gpm)
  • Hydraulic Pressure - Swing 2400.0 psi 16547.4 kPa
  • Hydraulic Pressure - System 2200.0 psi 15168.5 kPa
  • Swing Speed 8.0 r/min 8.0 r/min

Service Refill Capacities

  • Fuel Tank 42.0 gal (US) 159.0 l

Weights

  • Operating Weight 15915.0 lb 7218.9 kg

Operator Station

On standard loaders with operator's station, the hydraulic pilot joystick controls and rocker swing pedal are ergonomically designed for ease of operation and maximum loader control required for the high cycle millyard applications. The operator station is designed with comfort in mind. The spacious cabs feature a large, fully adjustable suspension seat with lumbar support. Fold-up armrests are fully adjustable to allow adjustment of the joystick controls to match the operator for ease of operation, increased performance. Excellent visibility of the work area is provided through large tinted cab windows. Overhead visibility is maximized through the large, tinted Lexan skylight. Operator protection is afforded through the front guard. This swing-out guard is designed for quick and simple access to allow cleaning of the front window.

Mounting System

The Resilient Pad Mounting System includes a set of special rubber isolators on each mounting fastener that absorbs stress in two directions. An additional hydraulic accumulator is built into the main boom cylinder circuit to further absorb peak-load shocks.

Enclosed Components

Weatherproof electric service panels include starters, controls, transformers, circuit breakers and fuse blocks.

Motor Options

Electric motors range in horsepower from 75 to 100 hp and are totally enclosed and rated for severe duty. Power supply wiring packages provide for 440V/60Hz US or 575V/60Hz Canadian service.

Boom Length Options

Heavy-duty boom options range in length from 7.6 m to 10.9m (25' to 36') for handling a variety of tree lengths.

Customer Stories

Discover what’s new and how customers like you are benefiting from our products and services. Check back often for updates.

Promotions

Looking for that perfect piece of used equipment to complement your fleet? Check out our Used Exclusives, featuring new machines every week!

Social

Let’s talk. Connect with us on one of our social channels to start the conversation and see what we’re up to.

Branch Locator

Looking for your nearest branch? Get in touch with us today by contacting one of our branches directly. We’re always ready to help.

Services

When you choose Finning, you have a wide array of support and specialty services to help you get the most from your equipment.

Technology

Integrated technology can help you understand your equipment's output and help extend its lifespan.

Finance

Choose from a range of financing solutions that allow you to purchase equipment, parts, services, and technology when you need it.

Please share your feedback on Finning.com!

Close window

We are committed to providing you with the best site experience possible.  Please take our brief survey to tell us how we are doing.

Thank you in advance for your time!