Menu

773G (Tier 2)

773G (Tier 2) Standard Equipment

POWER TRAIN

  • For non-regulated regions only: - Direct drive fan - MEUI-A fuel system
  • Braking system: - Automatic Retarder Control (ARC) - Manual retarder (utilizes rear oil cooled, multiple disc brakes) - Brake release motor (towing) - Dry disc brakes (front) - Front brake disconnect switch (front) - Oil-cooled multiple disc brakes (rear) - Brake wear indicator (rear) - Parking brake - Secondary brake - Service brake
  • Transmission: - 7 speed automatic powershift with: • Electronic Clutch Pressure Control (ECPC) • Advanced Productivity Electronic Control Strategy (APECS) - Automatic neutral idle - Autostall - Second gear start

SUSPENSION SYSTEMS

  • Suspension, front and rear (EU compliant)

ELECTRICAL

  • Alarm backup
  • Alternator, 120 Amp
  • Autolube power supply ready
  • Batteries, maintenance-free, 12V (2), 1,400 CCA combined
  • Electrical system, 25 Amp, 24V to 12V converter
  • Lighting system: - Backup light (halogen) - Directional signals/hazard warning (front and rear LED) - Engine compartment light - Headlights, (halogen) with dimmer - Operator access courtesy lights - Side profile lights - Stop/tail lights (LED)
  • Service center containing: - Battery jump start - Breakers with spare fuses - Lock out switch - Ports, ET and VIMS - Service lockout switch (power without engine start)

TECHNOLOGY PRODUCTS

  • Economy Modes, standard and adaptive
  • Product Link, cellular or satellite
  • Traction Control System (TCS)
  • Truck Production Management System (TPMS)
  • Vital Information Management System (VIMS)

OPERATOR ENVIRONMENT

  • Advisor display: - Fluid level monitoring - Fuel level monitoring - Display languages (market based)
  • Air conditioning/heat
  • Automatic temperature control
  • Ashtray and cigarette lighter
  • Coat hook
  • Cup holders (4)
  • Diagnostic connection port, 24V
  • Entertainment radio ready: - 5 amp converter - Speakers - Antenna - Wiring harness
  • Foot rest
  • Gauges/indicators: - Brake oil temperature gauge - Coolant temperature gauge - Engine overspeed indicator - Fuel level - Hour meter - Speedometer with odometer - Tachometer - Transmission gear indicator
  • Hoist lever
  • Horn
  • Light - courtesy
  • Light - dome
  • Mirrors, non-heated
  • Power port, 24V and 12V (2)
  • Rollover Protection (ROPS)/Falling Object Protection (FOPS)
  • Seat, Cat Comfort Series III: - Full air suspension - Retractable 3-point seat belt with shoulder harness
  • Seat, training with lap belt
  • Steering wheel, padded, tilt and telescopic
  • Storage compartment
  • Sun visor
  • Throttle lock
  • Window, hinged, right side (emergency exit)
  • Window, powered, left side
  • Windshield wiper intermittent and washer

GUARDS

  • Driveline
  • Engine crankcase
  • Fan

FLUIDS

  • Antifreeze
  • Extended life coolant to -34° C (-30° F)
  • Grouped ground-level filters

OTHER STANDARD EQUIPMENT

  • Body down indicator
  • Body safety pin (secures body in up position)
  • Center mounted rims
  • Fuel tank, 795 L (210 gal)
  • Ground level battery disconnect
  • Ground level engine shutdown
  • Ground level grease fittings
  • Operator Maintenance Manual (OMM)
  • Rims 17 × 35
  • Rock ejectors
  • Secondary steering (electric)
  • Tie down eyes
  • Tow hooks (front)/tow pin (rear)
  • Vandalism protection locks

Select Units

Overview

G Series represents a new era for the 773, and with your long-term success as our goal, we've developed this truck to be more productive and economical. It offers your operators the confidence, comfort and control to run at peak efficiency, and it can feed your crushers and haul material at a lower cost per ton. When you also consider its performance and fuel efficiency, the 773G is the right truck for our generation.

Engine

  • Engine Model Cat® C27 ACERT™ Cat® C27 ACERT™
  • Rated Engine Speed 2000.0 r/min 2000.0 r/min
  • Gross Power - SAE J1995 775.0 HP 578.0 kW
  • Net Power - SAE J1349 733.0 HP 546.0 kW
  • Net Power - 80/1269/EEC 741.0 HP 552.0 kW
  • Net Power - ISO 9249 741.0 HP 552.0 kW
  • Bore 5.4 in 137.0 mm
  • Stroke 6.0 in 152.0 mm
  • Displacement 1648.0 in³ 27.0 l
  • Engine Power - ISO 14396 763.0 HP 569.0 kW
  • Net Torque 2689.0 ft-lb 3646.0 N·m
  • Peak Torque - Speed 1300.0 r/min 1300.0 r/min

Weights - Approximate

  • Maximum Gross Vehicle Weight 226503.0 lb 102740.0 kg

Operating Specifications

  • Nominal Payload Class (100%) 61.7 ton (US) 56.0 ton (US)
  • Top Speed - Loaded 42.0 mile/h 67.6 km/h
  • Body Capacity - SAE 2:1 46.75 yd³ 35.75 m³
  • Maximum Working Payload (110%) 67.8 ton (US) 61.5 ton (US)
  • Not to Exceed Payload (120%)* 74.0 ton (US) 67.1 ton (US)

Transmission

  • Forward - 1 6.7 mile/h 10.8 km/h
  • Forward - 2 9.4 mile/h 15.1 km/h
  • Forward - 3 12.7 mile/h 20.4 km/h
  • Forward - 4 17.0 mile/h 27.4 km/h
  • Forward - 5 23.0 mile/h 37.0 km/h
  • Forward - 6 31.1 mile/h 50.1 km/h
  • Forward - 7 42.0 mile/h 67.6 km/h
  • Reverse 8.8 mile/h 14.1 km/h

Final Drives

  • Differential Ratio 3.64:1 3.64:1
  • Planetary Ratio 4.80:1 4.80:1
  • Total Reduction Ratio 17.49:1 17.49:1

Brakes

  • Brake Surface - Front 257.0 in² 655.0 cm²
  • Brake Surface - Rear 9497.0 in² 61269.0 cm²
  • Brake Standards ISO 3450:1996 ISO 3450:1996

Body Hoists

  • Pump Flow - High Idle 118.0 gal/min 448.0 l/min
  • Relief Valve Setting - Raise 2502.0 psi 17250.0 kPa
  • Relief Valve Setting - Lower 500.0 psi 3450.0 kPa
  • Body Raise Time - High Idle 9.5 s 9.5 s
  • Body Lower Time - Float 13.0 s 13.0 s
  • Body Power Down - High Idle 13.0 s 13.0 s

Capacity - Dual Slope - 100% Fill Factor

  • Struck 35.13 yd³ 26.86 m³
  • Heaped 2:1 (SAE) 46.76 yd³ 35.75 m³

Capacity - Flat Floor - 100% Fill Factor

  • Struck 34.33 yd³ 26.25 m³
  • Heaped 2:1 (SAE) 46.41 yd³ 35.49 m³

Weight Distributions - Approximate

  • Front Axle - Empty 53.0 % 53.0 %
  • Front Axle - Loaded 35.0 % 35.0 %
  • Rear Axle - Empty 47.0 % 47.0 %
  • Rear Axle - Loaded 65.0 % 65.0 %

Suspension

  • Rear axle - Oscillation 8.1 ° 8.1 °
  • Empty Loaded Cylinder Stroke Front 9.2 in 234.0 mm
  • Empty Loaded Cylinder Stroke Rear 5.8 in 149.0 mm

Service Refill Capacities

  • Fuel Tank 210.0 gal (US) 795.0 l
  • Cooling System 45.0 gal (US) 171.0 l
  • Differential - Final Drives 38.0 gal (US) 145.0 l
  • Steering Tank 9.5 gal (US) 36.0 l
  • Steering System - Including Tank 14.0 gal (US) 54.0 l
  • Brake Hoist System 85.0 gal (US) 322.0 l
  • Brake/Hoist Hydraulic Tank 46.5 gal (US) 176.0 l
  • Crankcase 24.0 gal (US) 90.0 l
  • Torque Converter - Transmission System - HRC 18.0 gal (US) 70.0 l
  • Torque Converter - Transmission System - LRC 16.0 gal (US) 61.0 l

Tires

  • Standard Tire 24.00R35 (E4) 24.00R35 (E4)

ROPS

  • ROPS/FOPS Standards Standards Standards

Sound

  • Sound Standards Standards Standards

Steering

  • Turning Diameter - Front 77.1 ft 23.5 m
  • Steering Standards SAE J1511 FEB94 ISO 5010:1992 SAE J1511 FEB94 ISO 5010:1992
  • Steer Angle 31.0 ° 31.0 °
  • Turning Circle - Clearance Diameter 85.6 ft 26.1 m

Safety

See more

Operator Work Environment

See more

Sustainability

See more

Cutting Your Fuel Costs

See more

Performance

See more

Long Term Value and Durability

See more

Body Options

See more

Service Convenience

See more

Customer Stories

Discover what’s new and how customers like you are benefiting from our products and services. Check back often for updates.

Promotions

Looking for that perfect piece of used equipment to complement your fleet? Check out our Used Exclusives, featuring new machines every week!

Social

Let’s talk. Connect with us on one of our social channels to start the conversation and see what we’re up to.

Branch Locator

Looking for your nearest branch? Get in touch with us today by contacting one of our branches directly. We’re always ready to help.

Services

When you choose Finning, you have a wide array of support and specialty services to help you get the most from your equipment.

Technology

Integrated technology can help you understand your equipment's output and help extend its lifespan.

Finance

Choose from a range of financing solutions that allow you to purchase equipment, parts, services, and technology when you need it.

Please share your feedback on Finning.com!

Close window

We are committed to providing you with the best site experience possible.  Please take our brief survey to tell us how we are doing.

Thank you in advance for your time!