Menu

770G

Select Units

Overview

In 1963 Caterpillar introduced the 769, a revolutionary off-road truck that was purpose-built for the rigors of mining and heavy construction. Fifty years later, our trucks have never been better. We’ve taken the best of our rugged, dependable heritage and combined it with technologies that help our environment, make your operators more productive, and dramatically improve the economics of your haul fleet. The 770G has an updated Traction Control System (TCS) to keep you moving even when the ground conditions aren’t perfect. You’ll see improvements in fuel use through new and flexible fuel savings and we're making the operating experience best in class with automotive quality shifting, noise reduction, and cab updates. Our heritage and new use of technology are combined in this truck for one purpose – the continued success of your business.

Operating Specifications

  • Nominal Payload Class (100%) 42.1 ton (US) 38.2 t
  • Top Speed - Loaded 45.8 mile/h 73.7 km/h
  • Target Payload (100%) 42.1 ton (US) 38.2 t
  • Maximum Working Payload (110%) 46.3 ton (US) 42.0 t
  • Maximum Allowable Payload (120%)* 50.5 ton (US) 45.8 t
  • Body Capacity - SAE 2:1 32.9 yd³ 25.2 m³
  • Note (1) *Refer to Caterpillar 10/10/20 Payload Policy for maximum gross machine weight limitations. *Refer to Caterpillar 10/10/20 Payload Policy for maximum gross machine weight limitations.
  • Note (2) Target payload and capacity based on Dual Slope body with no liner. Attachment selection will affect payload and maximum gross machine operating weight. Target payload and capacity based on Dual Slope body with no liner. Attachment selection will affect payload and maximum gross machine operating weight.

Final Drives

  • Differential Ratio 1.92:1 1.92:1
  • Planetary Ratio 4.80:1 4.80:1
  • Total Reduction Ratio 9.26:1 9.26:1

Body Hoists

  • Pump Flow - High Idle 118.0 gal/min 448.0 l/min
  • Relief Valve Setting - Raise 2750.0 psi 18950.0 kPa
  • Relief Valve Setting - Lower 500.0 psi 3450.0 kPa
  • Body Raise Time - High Idle 7.5 s 7.5 s
  • Body Lower Time - Float 10.0 s 10.0 s
  • Body Power Down - High Idle 10.0 s 10.0 s

Capacity - Dual Slope - 100% Fill Factor

  • Struck 23.01 yd³ 17.6 m³
  • Heaped (SAE 2:1)* 32.9 yd³ 25.2 m³
  • Note (1) Contact your local Cat dealer for body recommendation. Contact your local Cat dealer for body recommendation.
  • Note (2) *ISO 6483:1980. *ISO 6483:1980.

Capacity - Flat Floor - 100% Fill Factor

  • Struck 23.01 yd³ 17.6 m³
  • Heaped (SAE 2:1)* 32.9 yd³ 25.2 m³
  • Note (1) Contact your local Cat dealer for body recommendation. Contact your local Cat dealer for body recommendation.
  • Note (2) *ISO 6483:1980. *ISO 6483:1980.

Weight Distributions - Approximate

  • Front Axle - Empty 49.0 % 49.0 %
  • Front Axle - Loaded 34.0 % 34.0 %
  • Rear Axle - Empty 51.0 % 51.0 %
  • Rear Axle - Loaded 66.0 % 66.0 %

Suspension

  • Empty Loaded Cylinder Stroke Front 9.2 in 234.0 mm
  • Empty Loaded Cylinder Stroke Rear 5.9 in 149.0 mm
  • Rear axle - Oscillation 8.9 ° 8.9 °

Service Refill Capacities

  • Fuel Tank 140.0 gal (US) 530.0 l
  • Cooling System 33.0 gal (US) 125.0 l
  • Crankcase 17.0 gal (US) 64.0 l
  • Differential - Final Drives 47.0 gal (US) 180.0 l
  • Steering Tank 14.5 gal (US) 55.0 l
  • Steering System - Including Tank 23.0 gal (US) 87.0 l
  • Brake/Hoist Hydraulic Tank 38.0 gal (US) 145.0 l
  • Brake Hoist System 60.0 gal (US) 227.0 l
  • Torque Converter - Transmission System 17.0 gal (US) 64.0 l
  • DEF Tank 6.0 gal (US) 21.0 l

ROPS

  • ROPS Standards Rollover Protective Structure (ROPS) for cab offered by Caterpillar meets ISO 3471:2008 ROPS criteria. Rollover Protective Structure (ROPS) for cab offered by Caterpillar meets ISO 3471:2008 ROPS criteria.
  • FOPS Standards Falling Objects Protective Structure (FOPS) meets ISO 3449:2005 Level II FOPS criteria. Falling Objects Protective Structure (FOPS) meets ISO 3449:2005 Level II FOPS criteria.

Sound

  • Sound Standards (1) Hearing protection may be needed when operating with open operator station & cab for extended periods or in noisy environment. Hearing protection may be needed when operating with open operator station & cab for extended periods or in noisy environment.
  • Sound Standards (2) Exterior sound pressure power level for standard machine measured according to tests specified in ISO 6395:2008 is 116 dB(A). Exterior sound pressure power level for standard machine measured according to tests specified in ISO 6395:2008 is 116 dB(A).
  • Sound Standards (3) Operator Equivalent Sound Pressure Level is 79 dB(A) & 74 dB(A) with EU sound suppression applied when ISO 6396:2008 is used. Operator Equivalent Sound Pressure Level is 79 dB(A) & 74 dB(A) with EU sound suppression applied when ISO 6396:2008 is used.

Dimensions

  • Height - Top of ROPS 12.7 ft 3857.0 mm
  • Overall Body Length 26.8 ft 8199.0 mm
  • Inside Body Length 18.5 ft 5635.0 mm
  • Overall Length 28.9 ft 8796.0 mm
  • Wheel Base 13.0 ft 3960.0 mm
  • Rear Axle - Tail 8.5 ft 2586.0 mm
  • Ground Clearance 1.6 ft 518.0 mm
  • Dump Clearance 1.7 ft 506.0 mm
  • Loading Height - Empty 10.3 ft 3147.0 mm
  • Inside Body Depth - Maximum 4.6 ft 1404.0 mm
  • Overall Height - Body Raised 27.1 ft 8255.0 mm
  • Operating Width 15.7 ft 4780.0 mm
  • Centerline Front Tire Width 10.2 ft 3110.0 mm
  • Engine Guard Clearance 1.8 ft 335.0 mm
  • Outside Body Width 12.9 ft 3931.0 mm
  • Inside Body Width 11.9 ft 3627.0 mm
  • Front Canopy Height 13.5 ft 4114.0 mm
  • Rear Axle - Clearance 1.8 ft 548.0 mm
  • Centerline of Rear Dual Tire Width 8.3 ft 2536.0 mm
  • Overall Tire Width 12.1 ft 3693.0 mm

Engine

  • Engine Model Cat® C15 ACERT™ Cat® C15 ACERT™
  • Rated Engine Speed 1700.0 r/min 1700.0 r/min
  • Gross Power - SAE J1995 515.0 HP 384.0 kW
  • Net Power - SAE J1349 477.0 HP 356.0 kW
  • Net Power - ISO 9249 477.0 HP 356.0 kW
  • Net Power - 80/1269/EEC 489.0 HP 365.0 kW
  • Net Power - ISO 14396 508.0 HP 379.0 kW
  • Net Torque - SAE J1349 1834.0 ft·lbf 2486.0 N·m
  • Number of Cylinders 6 6
  • Bore 5.4 in 137.0 mm
  • Stroke 6.7 in 171.0 mm
  • Displacement 927.6 in³ 15.2 l
  • Note (1) Power rating applies at 1,700 rpm when tested under the specified condition for the specified standard. Power rating applies at 1,700 rpm when tested under the specified condition for the specified standard.
  • Note (2) Ratings based on SAE J1995 standard air conditions of 25° C (77° F) and 100 kPa (29.61 Hg) barometer. Power based on fuel having API gravity of 35 at 16° C (60° F) and an LHV of 42 780 kJ/kg (18,390 BTU/lb) when engine used at 30° C (86° F). Ratings based on SAE J1995 standard air conditions of 25° C (77° F) and 100 kPa (29.61 Hg) barometer. Power based on fuel having API gravity of 35 at 16° C (60° F) and an LHV of 42 780 kJ/kg (18,390 BTU/lb) when engine used at 30° C (86° F).
  • Note (3) No engine derating required up to 3000 m (9,843 ft) altitude. No engine derating required up to 3000 m (9,843 ft) altitude.
  • Note (4) Meets Japan Small Volume Exemption. Meets Japan Small Volume Exemption.
  • Emissions Meets U.S. EPA Tier 4 and EU Stage V emission standards. Meets U.S. EPA Tier 4 and EU Stage V emission standards.

Weights - Approximate

  • Target Gross Machine Operating Weight 157000.0 lb 71214.0 kg
  • Target Gross Machine Weight 157000.0 lb 71214.0 kg
  • Chassis Weight 55948.0 lb 25378.0 kg
  • Body Weight 17306.0 lb 7850.0 kg
  • Note (1) Chassis weight with 100% fuel, hoist, body mounting group, rims, and tires. Chassis weight with 100% fuel, hoist, body mounting group, rims, and tires.
  • Note (2) Body weight is the standard Dual Slope body with no liner and will vary depending on configuration. Body weight is the standard Dual Slope body with no liner and will vary depending on configuration.

Transmission

  • Forward - 1 7.4 mile/h 11.9 km/h
  • Forward - 2 10.1 mile/h 16.3 km/h
  • Forward - 3 13.8 mile/h 22.2 km/h
  • Forward - 4 18.5 mile/h 29.8 km/h
  • Forward - 5 25.1 mile/h 40.4 km/h
  • Forward - 6 33.8 mile/h 54.4 km/h
  • Forward - 7 45.8 mile/h 73.7 km/h
  • Reverse 8.8 mile/h 14.2 km/h
  • Note Maximum travel speeds with standard 18.00R33 (E4) tires. Maximum travel speeds with standard 18.00R33 (E4) tires.

Brakes

  • Brake Surface - Front 216.0 in² 1395.0 cm²
  • Brake Surface - Rear 6235.0 in² 40225.0 cm²
  • Brake Standards ISO 3450:2011 ISO 3450:2011
  • Note Target gross machine operating weight is 71 214 kg (157,000 lb). Target gross machine operating weight is 71 214 kg (157,000 lb).

Steering

  • Steering Standards ISO 5010:2007 ISO 5010:2007
  • Steer Angle 40.5 ° 40.5 °
  • Turning Diameter - Front 57.7 ft 17.6 m
  • Turning Circle - Clearance Diameter 66.6 ft 20.3 m
  • Note Target gross machine operating weight is 71 214 kg (157,000 lb). Target gross machine operating weight is 71 214 kg (157,000 lb).

Tires

  • Standard Tire 18.00R33 (E4) 18.00R33 (E4)
  • Note (1) Productive capabilities of the 770G truck are such that, under certain job conditions, TKPH (TMPH) capabilities of standard or optional tires could be exceeded and, therefore, limit production. Productive capabilities of the 770G truck are such that, under certain job conditions, TKPH (TMPH) capabilities of standard or optional tires could be exceeded and, therefore, limit production.
  • Note (2) Caterpillar recommends the customer evaluates all job conditions and consults the tire manufacturer for proper tire selection. Caterpillar recommends the customer evaluates all job conditions and consults the tire manufacturer for proper tire selection.

Power Train

See more

Emission Controls

See more

Fuel Saving Strategies

See more

Performance

See more

Brake Performance

See more

Traction Control System

See more

Truck Bodies

See more

Manufacturing and Design

See more

Operator Experience

See more

VIMS

See more

Monitoring Your Payload and Tires

See more

Pass Match

See more

Simple Service

See more

Customer Support

See more

Safety and Sustainability

See more

770G Standard Equipment

ELECTRICAL

  • Alarm, backup
  • Alternator, 115 ampere
  • Auxiliary jump start receptacle
  • Batteries, maintenance-free, 12V (2), 190 amp-hour
  • Electrical system, 24V
  • Lighting system:
    – Backup light (halogen)
    – Directional signals/hazard warning (front and rear LED)
    – Headlights, (halogen) with dimmer
    – Operator access courtesy lights (Developing Market Only)

PRODUCT LINK™ COMMUNICATIONS

  • Product Link Ready

GUARDS

  • Driveline
  • Engine crankcase

OPERATOR ENVIRONMENT

  • Air conditioning
  • Ashtray and cigarette lighter
  • Coat hook
  • Cup holders (4)
  • Diagnostic connection port, 24V
  • Entertainment Radio Ready:
    – 5 amp converter
    – Speakers
    – Antenna
    – Wiring harness
  • Gauges/indicators:
    – Air cleaner service indicator - electronic
    – Brake oil temperature gauge
    – Coolant temperature gauge
    – Hour meter
    – Tachometer
    – Engine overspeed indicator
    – Fuel level
    – Speedometer with odometer
    – Transmission gear indicator
  • Heater/defroster (11 070 kCal/43,930 BTU)
  • Hoist lever
  • Horn, electric
  • Light - dome
  • Light - courtesy
  • Messenger, display unit
  • Mirrors
  • Power port, 12V
  • ROPS cab, insulated/sound suppressed
  • Seat, Cat Comfort Series III:
    – full air suspension
    – four-point harness
  • Steering wheel, padded, tilt and telescopic
  • Storage compartment
  • Sun visor, tinted glass
  • Throttle lock
  • Windshield wiper (intermittent) and washer

POWER TRAIN

  • Air-To-Air Aftercooler (ATAAC)
  • Air cleaner with precleaner (1)
  • Automatic cold mode idle control
  • Electric start
  • Turbocharger
  • Braking system, hydraulic actuated:
    – Automatic Retarder Control (ARC) (utilizes rear oil-cooled, multiple disc brakes)
    – Brake release motor (towing)
    – Caliper-disc (front)
    – Extended Life Brakes
    – Oil-cooled, multiple disc (rear)
    – Parking
    – Secondary
    – Service
  • Transmission:
    – 7-speed automatic powershift
    – Body up-shift inhibitor
    – Controlled throttle shifting
    – Directional shift management
    – Downshift inhibitor
    – Neutral start switch
    – Neutral coast inhibitor
    – Reverse shift inhibitor
    – Reverse neutralizer during dumping
    – Programmable top gear selection

SUSPENSION SYSTEMS

  • Suspension, front and rear

OTHER STANDARD EQUIPMENT

  • Body safety pin (secures body in up position)
  • Body down indicator
  • CD-ROM parts book
  • Fan, hydraulic demand
  • Fuel tank (530 L/140 gal)
  • Guard, engine compartment
  • Guard, mud
  • Ground level battery disconnect
  • Ground level engine shutdown
  • Ground level grease fittings
  • Reservoirs (separate):
    – Brake/converter/hoist
    – Steering
    – Transmission/torque converter
  • Rims 15 × 33
  • Rock ejectors
  • Service platform, left and right side
  • Supplemental steering (automatic)
  • Tie down eyes
  • Tow hooks (front)/Tow pin (rear)
  • Vandalism protection locks

ANTIFREEZE

  • Extended Life Coolant to -35° C (-30° F)

770G Optional Equipment

OPTIONAL EQUIPMENT

  • Cat Engine Brake
  • Extended Life Brake Discs
  • Body heat/diverter box
  • Four (4) batteries
  • HID lights
  • Product Link
  • Backup alarm
  • Heated mirrors
  • Fuel heater
  • Ether aid
  • Coolant heater
  • Auto lube
  • Rear vision camera (WAVS)
  • Spare rims
  • Wheel chocks
  • Body sideboards
  • Traction Control System (TCS)

Customer Stories

Discover what’s new and how customers like you are benefiting from our products and services. Check back often for updates.

Promotions

Looking for that perfect piece of used equipment to complement your fleet? Check out our Used Exclusives, featuring new machines every week!

Social

Let’s talk. Connect with us on one of our social channels to start the conversation and see what we’re up to.

Branch Locator

Looking for your nearest branch? Get in touch with us today by contacting one of our branches directly. We’re always ready to help.

Services

When you choose Finning, you have a wide array of support and specialty services to help you get the most from your equipment.

Technology

Integrated technology can help you understand your equipment's output and help extend its lifespan.

Finance

Choose from a range of financing solutions that allow you to purchase equipment, parts, services, and technology when you need it.

Please share your feedback on Finning.com!

Close window

We are committed to providing you with the best site experience possible.  Please take our brief survey to tell us how we are doing.

Thank you in advance for your time!