Overview

Engine

• Engine Model Cat® C3.4B Cat® C3.4B
• Gross Power - Basic 100.0 HP 75.0 kW
• Note Meets U.S. EPA Tier 4 Final emission standards. Meets U.S. EPA Tier 4 Final emission standards.

Weights

• Operating Weight 22002.0 lb 9980.0 kg

Operating Specifications

• Rated Load Capacity 6500.0 lb 2948.0 kg
• Maximum Lift Height 42.0 ft 12.8 m
• Maximum Forward Reach 30.0 ft 9.1 m
• Top Travel Speed 21.0 mile/h 33.0 km/h
• Capacity at Maximum Height 6500.0 lb 2949.0 kg
• Capacity at Maximum Reach 700.0 lb 317.0 kg
• Drawbar Pull - Loaded 19783.0 lbf 88.0 kN
• Frame Leveling 10° 10°
• Turning Radius - Over Tires 12.0 ft 3.7 m

Tires

• Standard 370/75-28 Air Duraforce 370/75-28 Air Duraforce
• Optional (1) 370/75-28 Foam Duraforce 370/75-28 Foam Duraforce
• Optional (2) 13.00 × 24-16 PR Air 13.00 × 24-16 PR Air
• Optional (3) 13.00 × 24-12 PR Foam Filled 13.00 × 24-12 PR Foam Filled
• Optional (4) 13.00 × 24 Solid 13.00 × 24 Solid

Hydraulic System

• Gear Pump Single-section Single-section
• Auxiliary Hydraulic Flow 18.0 gal/min 68.0 l/min
• Auxiliary Hydraulic Pressure 3481.0 psi 240.0 bar
• Note Auxiliary Hydraulic Circuit used for all attachments equipped with cylinders or other hydraulic components. Auxiliary Hydraulic Circuit used for all attachments equipped with cylinders or other hydraulic components.
• System Operating Pressure 3770.0 psi 260.0 bar

Service Refill Capacities

• Fuel Tank 38.3 gal (US) 145.0 l
• Diesel Exhaust Fluid (DEF) Tank 5.7 gal (US) 21.5 l
• Hydraulic System 40.0 gal (US) 151.5 l

Boom Performance

• Boom Up 15.0 s 15.0 s
• Boom Down 10.3 s 10.3 s
• Tele In 9.5 s 9.5 s
• Tele Out 16.3 s 16.3 s

Brakes

• Parking Brakes Wet disc, spring applied hydraulic release on front axle Wet disc, spring applied hydraulic release on front axle
• Service Brakes Inboard wet disc brakes on front and rear axles Inboard wet disc brakes on front and rear axles

Axles

• Type (1) Trunnion mounted planetary 55 degree steer axles. Trunnion mounted planetary 55 degree steer axles.
• Type (2) High bias limited slip differential on front axle. High bias limited slip differential on front axle.

Transmission Speeds

• Forward 4 speed 4 speed
• Reverse 3 speed 3 speed

Work Tools

• Carriages - Dual Fork Positioning 50.0 in 1270.0 mm
• Carriages - Side Shift 48.0 in 1220.0 mm
• Carriages - Standard Rotate 50.0 in 1270.0 mm
• Carriages - Standard Tilt 50.0 in 1270.0 mm
• Carriages - Swing 100°, 1829 mm, 2948 kg Capacity, 2268 kg Swung (100°, 72 in, 6,500 lb Capacity, 5,000 lb Swung) 100°, 1829 mm, 2948 kg Capacity, 2268 kg Swung (100°, 72 in, 6,500 lb Capacity, 5,000 lb Swung)
• Carriages - Wide Rotate 72.0 in 1829.0 mm
• Carriages - Wide Tilt 72.0 in 1829.0 mm
• Cubing Forks [2] 1220 mm, 50 mm × 50 mm ([2] 48 in, 2 in × 2 in) [2] 1220 mm, 50 mm × 50 mm ([2] 48 in, 2 in × 2 in)
• Hydraulic IT Coupler Includes Auxiliary Electrics Includes Auxiliary Electrics
• Lumber Forks - Option 1 [2] 1525 mm, 45 mm × 180 mm ([2] 60 in, 1.75 in × 7 in) [2] 1525 mm, 45 mm × 180 mm ([2] 60 in, 1.75 in × 7 in)
• Lumber Forks - Option 2 [2] 1829 mm, 50 mm × 150 mm ([2] 72 in, 2 in × 6 in) [2] 1829 mm, 50 mm × 150 mm ([2] 72 in, 2 in × 6 in)
• Pallet Forks - Option 1 [2] 1220 mm, 60 mm × 125 mm ([2] 48 in, 2.36 in × 5 in) [2] 1220 mm, 60 mm × 125 mm ([2] 48 in, 2.36 in × 5 in)
• Pallet Forks - Option 2 [2] 1220 mm, 60 mm × 100 mm ([2] 48 in, 2.36 in × 4 in) [2] 1220 mm, 60 mm × 100 mm ([2] 48 in, 2.36 in × 4 in)
• Pallet Forks - Option 3 [2] 1525 mm, 60 mm × 150 mm ([2] 60 in, 2.36 in × 6 in) [2] 1525 mm, 60 mm × 150 mm ([2] 60 in, 2.36 in × 6 in)