907M Compact Wheel Loader

Specifications

Select Units

US
Metric

Overview

The Cat® 907M Compact Wheel Loader delivers high performance with outstanding versatility. On-the-go operator tuned hydraulics and drive train adjust the machine's response to the task at hand. Low sound levels, large spacious cab and intuitive controls keep you working comfortably all day long.

Engine

Weights

Operating Weight 12677.0 lb 5750.0 kg
Note Specifications shown are for a machine configured with general purpose buckets, bolt-on cutting edges, 75 kg (165 lb) operator, Dunlop 405/70 SPT9 tires, full fuel, comfort ROPS cab, standard flow hydraulics and skid-steer coupler. The 907M is configured with a 1.0 m³ (1.31 yd³) bucket with bolt-on cutting edge. Specifications shown are for a machine configured with general purpose buckets, bolt-on cutting edges, 75 kg (165 lb) operator, Dunlop 405/70 SPT9 tires, full fuel, comfort ROPS cab, standard flow hydraulics and skid-steer coupler. The 907M is configured with a 1.0 m³ (1.31 yd³) bucket with bolt-on cutting edge.

Service Refill Capacities

Engine Crankcase 3.0 gal (US) 11.2 l
Hydraulic System - Including Tank 18.5 gal (US) 70.0 l
Fuel Tank 20.6 gal (US) 78.0 l
Cooling System 4.5 gal (US) 16.5 l
Axles - Rear N/A N/A
Axles - Front N/A N/A
Transmission - Gear Box 2.2 gal (US) 8.5 l
Hydraulic Tank 12.2 gal (US) 46.0 l

Operating Specifications

Rated Bucket Capacity 1.31 yd³ 1.0 m³
Clearance - Full Lift and 45° Dump 7.97 ft 2429.0 mm
Reach - Full Lift and 45° Dump 2.6 ft 792.0 mm
Steering Articulation Angle - Each Direction 39° 39°
Full Turn Tipping Load 7716.0 lb 3500.0 kg
Tipping Load - Full Turn - ISO 14397-1 7339.0 lb 3330.0 kg
Tipping Load - Straight - ISO 14397-1 9007.0 lb 4087.0 kg

Loader Hydraulic System

Relief Pressure - Tilt Cylinder Head 4496.0 psi 31000.0 kPa
3rd Function Maximum Working Pressure 3408.0 psi 23500.0 kPa
Maximum Flow - Implement Pump - Auxiliary Function Standard Flow 19.0 gal/min 73.0 l/min
Relief Pressure - Tilt Cylinder Rod 2756.0 psi 19000.0 kPa
Maximum Flow - Implement Pump 19.0 gal/min 73.0 l/min
Maximum Flow - Implement Pump - Auxiliary Function High Flow 31.0 gal/min 116.0 l/min
Maximum Working Pressure - Implement Pump 3408.0 psi 23500.0 kPa
Hydraulic Cycle Time - 1,000 rpm - Dump, at Maximum Lift Height 3.0 s 3.0 s
Hydraulic Cycle Time - 1,800 rpm - Float Down, Maximum Lift to Ground Level 2.6 s 2.6 s
Hydraulic Cycle Time - 1,000 rpm - Float Down, Maximum Lift to Ground Level 2.6 s 2.6 s
Tilt Cylinder, Double Acting - Stroke 16.4 in 417.0 mm
Hydraulic Cycle Time - 1,800 rpm - Raise, Ground Level to Maximum Lift 5.5 s 5.5 s
Hydraulic Cycle Time - 1,000 rpm - Raise, Ground Level to Maximum Lift 9.6 s 9.6 s
Lift Cylinder, Double Acting - Rod Diameter 2.0 in 50.0 mm
Hydraulic Cycle Time - 1,800 rpm - Total Cycle Time 9.6 s 9.6 s
Lift Cylinder, Double Acting - Stroke 27.4 in 695.0 mm
Lift Cylinder, Double Acting - Bore Diameter 3.0 in 75.0 mm
Hydraulic Cycle Time - 1,800 rpm - Dump, at Maximum Lift Height 1.5 s 1.5 s
Tilt Cylinder, Double Acting - Rod Diameter 2.2 in 55.0 mm
Tilt Cylinder, Double Acting - Bore Diameter 3.5 in 90.0 mm
Boost Flow Maximum Pressure 3191.0 psi 22000.0 kPa

Dimensions with Bucket (Approximate) - Standard Lift - With ISO Coupler

Note (2) **Vary with tire. **Vary with tire.
Departure Angle 33° 33°
Height - Ground to Cab** 8.42 ft 2586.0 mm
Clearance - Level Bucket** 9.92 ft 3027.0 mm
Length - Overall* 17.92 ft 5469.0 mm
Dump Angle at Full Lift 45° 45°
Dig Depth** 3.7 in 95.0 mm
Machine Width 6.0 ft 1840.0 mm
Operating Weight 12913.0 lb 5859.0 kg
Height - Ground Clearance** 11.0 in 300.0 mm
Reach - Bucket at 45°* 2.33 ft 725.0 mm
Turning Radius - Inside of Tires 7.33 ft 2240.0 mm
Width - Tread Center 4.58 ft 1420.0 mm
Note (1) *Vary with bucket. *Vary with bucket.
Clearance - Bucket at 45° * 8.08 ft 2478.0 mm
Length - Wheel Base 7.08 ft 2170.0 mm
Note (3) Dimensions listed are for a machine configured with general purpose buckets, bolt-on cutting edges, 75 kg (165 lb) operator, no air conditioner and Dunlop 405/70 SPT9 tires. Dimensions listed are for a machine configured with general purpose buckets, bolt-on cutting edges, 75 kg (165 lb) operator, no air conditioner and Dunlop 405/70 SPT9 tires.
Width - Bucket 6.67 ft 2045.0 mm
Height - Bucket Pin** 10.58 ft 3227.0 mm
Articulation Angle 39° 39°
Turning Radius - Over Bucket 14.67 ft 4489.0 mm

Dimensions with Bucket (Approximate) - Standard Lift - With SSL Coupler

Clearance - Level Bucket** 9.92 ft 3035.0 mm
Width - Tread Center 4.58 ft 1420.0 mm
Machine Width 6.0 ft 1840.0 mm
Turning Radius - Inside of Tires 7.33 ft 2240.0 mm
Turning Radius - Over Bucket 14.67 ft 4473.0 mm
Length - Overall* 18.42 ft 5620.0 mm
Dig Depth** 4.2 in 107.0 mm
Operating Weight 12913.0 lb 5859.0 kg
Height - Bucket Pin** 10.58 ft 3227.0 mm
Note (2) **Vary with tire. **Vary with tire.
Note (3) Dimensions listed are for a machine configured with general purpose buckets, bolt-on cutting edges, 75 kg (165 lb) operator, no air conditioner and Dunlop 405/70 SPT9 tires. Dimensions listed are for a machine configured with general purpose buckets, bolt-on cutting edges, 75 kg (165 lb) operator, no air conditioner and Dunlop 405/70 SPT9 tires.
Clearance - Bucket at 45° * 7.67 ft 2359.0 mm
Width - Bucket 6.67 ft 2045.0 mm
Height - Ground to Cab** 8.42 ft 2586.0 mm
Dump Angle at Full Lift 45° 45°
Reach - Bucket at 45°* 2.67 ft 820.0 mm
Height - Ground Clearance** 11.0 in 300.0 mm
Length - Wheel Base 7.08 ft 2170.0 mm
Articulation Angle 39° 39°
Departure Angle 33° 33°
Note (1) *Vary with bucket. *Vary with bucket.

Buckets

Bucket Capacities 0.75-1.5 m3 (1.0-2.0 yd3) 0.75-1.5 m3 (1.0-2.0 yd3)
Note All capacities are applicable for each model. Bucket selection must be made with an understanding of the material density and application to ensure machine stability is maintained within the tipping loads stated per model and configuration. All capacities are applicable for each model. Bucket selection must be made with an understanding of the material density and application to ensure machine stability is maintained within the tipping loads stated per model and configuration.
Grapple 0.9 m³ (1.2 yd³) heaped 0.9 m³ (1.2 yd³) heaped
Multi-Purpose 0.75 m³ (1.0 yd³), 0.9 m³ (1.2 yd³), 1.05 m³ (1.37 yd³) 0.75 m³ (1.0 yd³), 0.9 m³ (1.2 yd³), 1.05 m³ (1.37 yd³)
Light Material 1.2 m³ (1.6 yd³), 1.5 m³ (2.0 yd³) 1.2 m³ (1.6 yd³), 1.5 m³ (2.0 yd³)
General Purpose 0.8 m³ (1 yd³), 0.9 m³ (1.2 yd³), 1.0 m³ (1.3 yd³), 1.1 m³ (1.4 yd³), 1.3 m³ (1.7 yd³) 0.8 m³ (1 yd³), 0.9 m³ (1.2 yd³), 1.0 m³ (1.3 yd³), 1.1 m³ (1.4 yd³), 1.3 m³ (1.7 yd³)

Cab

ROPS SAE J1040 MAY94, ISO 3471-1994. SAE J1040 MAY94, ISO 3471-1994.
FOPS SAE J/ISO 3449 APR98, Level II, ISO 3449 1992 Level II. SAE J/ISO 3449 APR98, Level II, ISO 3449 1992 Level II.
Note (2) When properly installed and maintained, the cab offered by Caterpillar, when tested with doors, and windows closed as per work cycle procedures specified in ISO 6395 2008, results in operator sound exposure Leq (Equivalent sound pressure level) of 66 dB(A) typical. When properly installed and maintained, the cab offered by Caterpillar, when tested with doors, and windows closed as per work cycle procedures specified in ISO 6395 2008, results in operator sound exposure Leq (Equivalent sound pressure level) of 66 dB(A) typical.
Note (1) Cat cab and Rollover Protective Structures (ROPS) are standard in North America and Europe. Cat cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.

Steering

Maximum Steering Torque - 0° (Straight Machine) 37155.0 ft·lbf 50375.0 N·m
Steering AC Cycle Times - Full Left to Full Right - 2,620 rpm 3.0 s 3.0 s
Nominal Flow - Steering Pump 12.0 gal/min 43.9 l/min
Maximum Steering Torque - 39° (Full Turn) 27747.0 ft·lbf 37620.0 N·m
Steering Cylinder, Double Acting - Bore Diameter 3.1 in 80.0 mm
Steering Articulation Angle - Each Direction 39° 39°
Maximum Working Pressure - Steering Pump 3191.0 psi 22000.0 kPa
Steering Cylinder, Double Acting - Rod Diameter 1.4 in 35.0 mm
Number of Steering Wheel Turns - Full Left to Full Right or Full Right to Full Left <6 turns <6 turns
Steering Cylinder, Double Acting - Stroke 11.8 in 300.0 mm

Tires

Note (4) Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model. Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model.
Option (2) 340/80 R18 AT-R Firestone 340/80 R18 AT-R Firestone
Option (7) 12.5/80 R18 Flexport™ 12.5/80 R18 Flexport™
Note (3) In certain applications, the loader's productive capabilities may exceed the tires' tonnes-km/h (ton-mph) capabilities. In certain applications, the loader's productive capabilities may exceed the tires' tonnes-km/h (ton-mph) capabilities.
Note (1) *Standard tire. *Standard tire.
Option (1) 335/80 R18 XZSL Michelin 335/80 R18 XZSL Michelin
Option (6) 405/70 R18 SPT9 Dunlop* 405/70 R18 SPT9 Dunlop*
Option (5) 340/80 R18 Bibload Michelin 340/80 R18 Bibload Michelin
Option (4) 340/80 R18 TRI2 Nokian 340/80 R18 TRI2 Nokian
Option (3) 340/80 R18 XMCL Michelin 340/80 R18 XMCL Michelin
Note (2) Other tire choices available, contact your Cat dealer for details. Other tire choices available, contact your Cat dealer for details.

Drive Train

Forward - Range 2 12.0 mile/h 20.0 km/h
Forward - High Range 22.0 mile/h 35.0 km/h
Reverse - Range 2 12.0 mile/h 20.0 km/h
Forward - Range 1 6.0 mile/h 10.0 km/h
Reverse - Range 1 6.0 mile/h 10.0 km/h
Reverse - High Range 22.0 mile/h 35.0 km/h

Engine - Tier 4 Final/Stage IV

Maximum Net Torque - SAE J1349 189.0 ft·lbf 257.0 N·m

Benefits & Features

High Performance

An electronically controlled hydrostatic transmission provides adjustable power to the ground and superb groundspeed control for fast digging cycles and the flexibility to efficiently perform a multitude of tasks along with high, full turn tipping loads and breakout forces, the M Series delivers a solution for all customer applications.

Ease of Operation

State of the art electro-hydraulic system provides low effort, fine control with fast cycle times. The all-in-one joystick helps keep eyes on the work. Machine responsiveness can be adjusted with the push of a button, which allows you to set up the machine exactly the way you want it based on the application.

Comfortable Cab

Low effort, responsive joystick includes Forward/Neutral/Reverse switch, optional diff lock, continuous flow triggers with proportional, third function hydraulics.
Easy access to the cab with ergonomically placed grab rails, steps and large platform.
Superb visibility to the work tool due to the wide windshield and Optimized Z-bar Loader.
Low sound levels.
Optional air conditioning with defrost/demist.
Optional heated, air suspension seat with lumbar and seat back tilt adjustment.

Parallel Lift Loader Linkage

The Cat® optimized Z-bar Loader combines the digging efficiency of a traditional Z-bar with tool carrying capabilities for great performance and versatility.

Parallel lift and high tilt forces throughout the working range help you safely and confidently handle loads with precise control.
Linkage features excellent visibility to the bucket cutting edge and fork tips.

Equipment

907M Standard Equipment

TRANSMISSION AND HYDRAULICS

18° frame oscillation, 78° articulation
Demand based cooling fan
Hydrostatic drive
Loader arm float function
Parallel lift Z-bar loader
Proportional auxiliary hydraulic circuit
Transmission, 20 km/h (12.4 mph) with heavy duty axles
Transmission inching function

ENGINE

Cat C3.3B DIT Tier 4 Final/Stage V (Europe only) or Tier 4 Final (North America only) emission standards
Cat extended life coolant
Closed circuit breather
Easy quick release fuel filter/water separator
ECO mode
Engine oil drain valve (non-spill ECO drain)
Lockable engine compartments
Two stage air cleaner with visual indicator

ELECTRICAL

Alternator 90 amp
Battery disconnect switch
Cab mounted fuse panel
Engine cold starter aid
Heavy duty battery, 12V
Service point connector for electronic diagnosis (Cat Electronic Technician™)
Reversing alarm

GENERAL

E-coat paint primer
Pressure test points
Recovery hitch and pin
Scheduled Oil Sampling S·O·SSM ports

OPERATOR ENVIRONMENT

Adjustable internal mirror
Adjustable wrist rest
Auxiliary power sockets
Coat hook
Cup holder
Digital service hour meter
Easy clean cab floor
Gauges: fuel hydraulic temperature, coolant temperature, speedometer
Multifunction joystick with direction control
On board digital display cluster
Operator station on isolation mounts
Retractable seat belt
ROPS and FOPS certified canopy/cab
Sound suppression
Sun visor
Suspended brake/accelerator pedals
Suspension seat
Two doors (enclosed cab)
Two external knock back mirrors
Warning indicators for major systems
Wiper/washer front and rear (enclosed cab)
Warnings: master, park brake, hydraulic oil pressure, engine oil pressure, coolant temp, electrical system, hydraulic filter bypass

907M Optional Equipment

TRANSMISSION AND HYDRAULICS

100% differential lock on both axles, selectable on the move
Adjustable speed control (creeper control)
Adjustable high stat response settings
Electronic throttle lock
Ride control
Rimpull control
Speeder, 35 km/h (21.7 mph) with secondary steering

ENGINE

Engine block heater 120V
Precleaner for engine air filter

ELECTRICAL

Machine Security System (MSS)
Magnetic rotating beacon
Halogen working lights, two front and two rear
LED working lights, two front and two rear
Work tool wiring harness

GENERAL

Custom color
Rear light guards
Tire options including heavy duty tires

FLUIDS

Cat extended life coolant (–50° C/–58° F)

LOADER

Adjustable implement modulation
High flow auxiliary hydraulics with pressure relieving quick disconnect manifold
Load check valves
Return To Dig tool positioner

WORK TOOLS

For all work tool options, consult your local Cat dealer

OPERATOR ENVIRONMENT

Air conditioning
Cabin light
Cat Radio/FM/DAB+/Bluetooth/Aux/Mic/Phone/USB
Comfort cab includes: cloth suspension seat, heated rear window, sliding left window and radio ready
Open canopy: fixed steering column, coat hook, sun visor (North America only)
Deluxe cab includes: Comfort cab options plus heated cloth air suspension seat with lumbar support and right sliding window
Heated rear window (enclosed cab)
Heater with window side and feet vents (enclosed cab)
Radio ready kit including speakers (enclosed cab)
Rear blind