Menu

914M

Select Units

Overview

The Cat® 914M Wheel Loader sets the standard for productivity, fuel efficiency and operator comfort. The improved optimized Z-bar loader linkage delivers the quick loading performance of a traditional Z-bar with the parallelism and load handling capability of a toolcarrier.

Engine

  • Maximum Gross Power 100.0 HP 74.0 kW
  • Net Power 97.0 HP 72.0 kW
  • Maximum Gross Power - SAE J1995 102.0 HP 76.0 kW
  • Rated Net Power - Rated Engine Speed 2200.0 r/min 2200.0 r/min
  • Rated Net Power - SAE J1349 96.0 HP 72.0 kW
  • Maximum Gross Power - ISO 14396 100.0 HP 74.0 kW
  • Maximum Gross Power - Maximum Engine Speed 2350.0 r/min 2350.0 r/min
  • Maximum Gross Power - ISO 14396 (DIN) 101.0 HP 74.0 kW
  • Engine Model Cat C4.4 ACERT� Cat C4.4 ACERT�
  • Emissions Engine meets U.S. EPA Tier 4 Final/EU Stage IV emission standards. Engine meets U.S. EPA Tier 4 Final/EU Stage IV emission standards.
  • Stroke 5.0 in 127.0 mm
  • Displacement 268.0 in³ 4.4 l
  • Maximum Gross Torque - SAE J1995 336.0 ft·lbf 455.0 N·m
  • Rated Net Power - ISO 9249 97.0 HP 72.0 kW
  • Maximum Gross Torque - ISO 14396 332.0 ft·lbf 450.0 N·m
  • Rated Net Power - ISO 9249 (DIN) 98.0 HP 72.0 kW
  • Bore 4.13 in 105.0 mm
  • Note Net power advertised is the power available at the flywheel plus front drive implement pump when the engine is equipped with fan, air cleaner, muffler and alternator. Net power advertised is the power available at the flywheel plus front drive implement pump when the engine is equipped with fan, air cleaner, muffler and alternator.

Weights

  • Operating Weight 19315.0 lb 8761.0 kg

Service Refill Capacities

  • Cooling System 5.7 gal (US) 21.5 l
  • Fuel Tank 40.7 gal (US) 154.0 l
  • Hydraulic System - Including Tank 25.9 gal (US) 98.0 l
  • Engine Crankcase 2.3 gal (US) 8.8 l
  • Diesel Exhaust Fluid (DEF) Tank 5.0 gal (US) 18.9 l
  • Axles - Front Center Differential 2.0 gal (US) 7.5 l
  • Transmission 0.9 gal (US) 3.4 l
  • Hydraulic Tank 14.5 gal (US) 55.0 l
  • Note DEF used in Cat SCR systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1. DEF used in Cat SCR systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1.
  • Axles - Rear Center Differential 2.0 gal (US) 7.5 l

Operating Specifications

  • Rated Bucket Capacity 2.5 yd³ 1.9 m³

Buckets

  • Bucket Capacities 1.3-1.9 m3 (1.7-2.5 yd3) 1.3-1.9 m3 (1.7-2.5 yd3)

Cab

  • ROPS ISO 3471:2008 ISO 3471:2008
  • FOPS ISO 3449:2005 Level II ISO 3449:2005 Level II
  • Note (2) The declared dynamic operator sound pressure levels per ISO 6396:2008*, when properly installed and maintained, is 77 dB(A). The declared dynamic operator sound pressure levels per ISO 6396:2008*, when properly installed and maintained, is 77 dB(A).
  • Note (1) Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe. Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.
  • Note (3) The labelled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC is 103 dB(A). The labelled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC is 103 dB(A).
  • Note (4) *The measurements were conducted with the cab doors and windows closed. *The measurements were conducted with the cab doors and windows closed.

Loader Hydraulic System

  • Hydraulic Cycle Time - Dump, at Maximum Reach 1.4 s 1.4 s
  • Maximum Flow - Implement Pump - 3rd Function, Maximum Flow, High 32.0 gal/min 120.0 l/min
  • Maximum Flow - Implement Pump 39.0 gal/min 148.0 l/min
  • Relief Pressure - Tilt Cylinder 4931.0 psi 34000.0 kPa
  • Hydraulic Cycle Time - Rackback 2.2 s 2.2 s
  • Relief Pressure - Tilt Cylinder - 4th Function Maximum Working Pressure 3046.0 psi 21000.0 kPa
  • Hydraulic Cycle Time - Total Cycle Time 12.5 s 12.5 s
  • Relief Pressure - Tilt Cylinder - 3rd Function Maximum Working Pressure 3046.0 psi 21000.0 kPa
  • Maximum Flow - Implement Pump - 4th Function, Maximum Flow 24.0 gal/min 90.0 l/min
  • Hydraulic Cycle Time - Raise, Ground Level to Maximum Lift 5.2 s 5.2 s
  • Maximum Flow - Implement Pump - 3rd Function, Maximum Flow, Standard 24.0 gal/min 90.0 l/min
  • Hydraulic Cycle Time - Float Down, Maximum Lift to Ground Level 3.7 s 3.7 s
  • Maximum Working Pressure - Implement Pump 4061.0 psi 28000.0 kPa

Tires

  • Other Choices Include 17.5-25 12PR L2; 17.5-R25 XHA * L3; 17.5-R25 * L2/L3 PC RM; 17.5-25 16PR L3, 3PC Rim; 17.5-25 GY L2/L3; 17.5-25 12PR L2, SNOW; Flexport� 17.5-25 12PR L2; 17.5-R25 XHA * L3; 17.5-R25 * L2/L3 PC RM; 17.5-25 16PR L3, 3PC Rim; 17.5-25 GY L2/L3; 17.5-25 12PR L2, SNOW; Flexport�
  • Note (3) Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model. Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model.
  • Standard Size 17.5-25 12PR 17.5-25 12PR
  • Note (2) In certain applications, the loader's productive capabilities may exceed the tire's tonnes-km/h (ton-mph) capabilities. In certain applications, the loader's productive capabilities may exceed the tire's tonnes-km/h (ton-mph) capabilities.
  • Note (1) Other tire choices are available. Contact your Cat dealer for details. Other tire choices are available. Contact your Cat dealer for details.

Steering

  • Number of Steering Wheel Turns - Full Left to Full Right or Full Right to Full Left 3.75 turns 3.75 turns
  • Maximum Working Pressure - Steering Pump 3263.0 psi 22500.0 kPa
  • Steering Cycle Times - Full Left to Full Right - At 2,350 rpm: 90 rpm Steering Wheel Speed 2.8 s 2.8 s
  • Maximum Flow - Steering Pump 22.0 gal/min 82.0 l/min
  • Steering Articulation Angle - Each Direction 40.0 ° 40.0 °

Transmission

  • Forward and Reverse - High Range 25.0 mile/h 40.0 km/h
  • Note *Creeper Control allows speed control from a stand still up to 10 km/h (6.3 mph). The Creeper Control will only work in Range 1. *Creeper Control allows speed control from a stand still up to 10 km/h (6.3 mph). The Creeper Control will only work in Range 1.
  • Forward and Reverse - Low Range, Speed Range 1* 6.3 mile/h 10.0 km/h
  • Forward and Reverse - Low Range, Speed Range 2* 12.5 mile/h 20.0 km/h

Engine - Tier 4 Final/Stage IV

  • Maximum Net Torque - SAE J1349 325.0 ft·lbf 441.0 N·m
  • Maximum Net Torque - ISO 9249 329.0 ft·lbf 446.0 N·m

Axles

  • Front Fixed; Locking differential (standard) Fixed; Locking differential (standard)
  • Rear Oscillating �11 degrees; Locking differential (Standard) Oscillating �11 degrees; Locking differential (Standard)

Efficiently Powerful

With high full turn tipping loads, powerful breakout forces and increased engine power the M Series delivers a balanced solution for all customer applications.

Work Made Easy

The Cat® Optimized Z-bar Loader linkage combines the digging efficiency of a traditional Z-bar with tool carrier capabilities for great performance and versatility. With parallel lift and high tilt forces throughout the working range you can safely and confidently handle loads with precise control. Multi-function work has never been easier with dedicated pumps for each system, allowing the operator to simultaneously lift, steer and drive without compromise.

Enjoy All Day Comfort

A spacious, safe, quiet and comfortable operator environment helps keep you relaxed and productive throughout the day. Experience superior all around visibility with a pillarless front windshield, clean hydraulic linesrouting as well as in-line engine mounting for excellent rear visability. Electro-hydraulic controls featuring low effort joystick for lift and tilt functions along with integrated Forward/Neutral/Reverse switch, differential lock trigger and optional third and fourth auxiliary functions.

  • Climate controlled cab with heated rear glass
  • Information at a glance with large LCD display on front console
  • Heated seat option for added comfort
  • Exclusive electro-hydraulic cylinder snubbing
  • An extra eye on the job site with optional* rearview camera capability

*Standard in Europe.

Hydraulic and Controls

State of the art electro-hydraulic system provides low effort, fine control with fast cycle times. All-in-one joystick helps keep eyes on the work. Operator can adjust machine responsiveness with the push of a button, which allows the operator to set up the machine exactly the way they want it based on the application.

Tuned Drivetrain

Smooth shifting and powerful acceleration is matched with modulated hydrostatic braking in the inching/braking pedal, creating a rhythm for material moving. Creeper and electronic engine speed control makes broom and snow blower work easy. Operator tunes between smooth or aggressive shifting with the push of a button.

Customer Stories

Discover what’s new and how customers like you are benefiting from our products and services. Check back often for updates.

Promotions

Looking for that perfect piece of used equipment to complement your fleet? Check out our Used Exclusives, featuring new machines every week!

Social

Let’s talk. Connect with us on one of our social channels to start the conversation and see what we’re up to.

Branch Locator

Looking for your nearest branch? Get in touch with us today by contacting one of our branches directly. We’re always ready to help.

Services

When you choose Finning, you have a wide array of support and specialty services to help you get the most from your equipment.

Technology

Integrated technology can help you understand your equipment's output and help extend its lifespan.

Finance

Choose from a range of financing solutions that allow you to purchase equipment, parts, services, and technology when you need it.