Producing reliable power from 1735 to 2600 kWe, each generator set has been designed to meet World bank (WB) emission certification stage 2. The CM25C 50 and 60 Hz, 6, 8 or 9 cylinder, turbocharged-aftercooled generator set, is designed for Ultrafast start time and load acceptance, low fuel and oil consumption requiring low maintenance.

Compare Models
Generator Set Specifications
expand / collapse icon
Minimum Rating 1735 kWe 1735 kWe
Maximum Rating 2600 kWe 2600 kWe
Emissions/Fuel Strategy (WB) Cert stage 1 and 2 (WB) Cert stage 1 and 2
Voltage 3000 to 13800 Volts 3000 to 13800 Volts
Frequency At Speed 50 Hz @ 750 / 60 Hz @ 720 50 Hz @ 750 / 60 Hz @ 720
Duty Cycle Prime, Continuous Prime, Continuous
Ready To Accept Loads (Preheated/Vented) 40 s 40 s
Normal Ramp Up To 100% Load 75 s 75 s
Emergency Ramp Up 10% To 100% Load 25 s 25 s
Genset Efficiency Up To 44.20% 44.20%

Reliable Operation

  • Intensive cooling of key components including exhaust valve seats, injector cooling integrated into lube oil system
  • Reliable, proven and high efficient single turbo charging system
  • Classification society standards ensure high safety and quality
  • Intelligent simplicity ensures a robust engine platform
  • Optimized service schedules enable high availability and long durability

Control & Monitoring

  • Ultrafast start time and load acceptance
  • No engine start limitations
  • Continuous power (base and peak load), prime power, stand-by
  • Part load with high efficiency
  • Monitoring for unattended operation
  • Asset intelligence system

Ease Of Installation

  • Reduced complexity of standard modular design allows an easy installation
  • Low space requirements between the gensets
  • Genset is ready for installation
  • Generator set designed for direct elastic mounting

Ease Of Operation

  • Low fuel and oil consumption
  • Low maintenance requirements
  • Operator and maintenance training courses available

Intelligent Simplicity

  • High reliability, modular design and integral construction reduce the number of components by 40% over conventional designs e.g.:
    - Dry engine block with integrated ducts for lubricating oil and charge air and underslung crankshaft
    - Compact cylinder head design
  • Smart maintenance solutions:
    - Easily removable cylinder heads, quick removable fluid connections
    - Split connecting rods to allow fast and easy piston removal without disturbing the big end bearing
    - Segmental camshaft design
    - Simplified parts spectrum by using single-pipe exhaust gas
    - Engine block free from cooling water
  • State-of-art material ensures long life time

Ease Of Maintenance

  • Smart maintenance solutions allow an easy component accessibility
  • Large inspection openings afford an easy serviceability to core engine internals
  • Core engine components designed for reconditioning and reuse
  • Short maintenance times enable high availability
  • No engine removal necessary for maintenance and overhauls

Fuel

  • Liquid: Light fuel oil (LFO), crude oil and heavy fuel oil (HFO) with fuel quality up to 700 cSt/50°C according to CIMAC H55/K55
  • Dual:
    - Light fuel oil (LFO), crude oil and heavy fuel oil (HFO) with fuel quality up to 700 cSt/50°C according to CIMAC H55/K55
    - Natural gas with methane number > 80 and lower heating value of 28MJ/Nm3
  • Gaseous: Natural gas with methane number > 80 and lower heating value of 31.5 MJ/Nm3

Emissions

  • World bank emission certification (Stage 2)
  • Technische Anleitung (TA) Luft (only gas)
  • Post-emission treatment systems for lower emission requirements available

Expertise & Experience

  • Assistance for planning - delivery - commissioning - operation and service)
  • Expertise and experience for solutions to maximize benefits, e.g. combine heat and power systems (CHP)

World Wide Product Support

  • With nearly 200 Cat dealers we are at home around the globe
  • Factory-trained technicians, original parts and support are never out of reach
  • Long term service agreements offer back-to-back services from preventive maintenance, scheduled maintenance to full operation and maintenance of your asset

CM25C Standard Equipment

Fuel System
expand / collapse icon
  • Gas valve unit (GVU) (only dual fuel (DF) and gas)
  • Engine ventilation module (only dual fuel (DF) and gas)
  • Circulation module
  • Separator module
  • Pre-pressure module
  • Ignition fuel oil module (only dual fuel (DF))