Menu

CM32C V-Type

Select Units

Overview

Producing reliable power from 5580 to 7840 kWe, each generator set has been designed to meet World bank (WB) emission certification stage 2.

Generator Set Specifications

  • Minimum Rating 5580 kWe 5580 kWe
  • Maximum Rating 7840 kWe 7840 kWe
  • Emissions/Fuel Strategy (WB) Cert stage 1 and 2 (WB) Cert stage 1 and 2
  • Voltage 3000 to 13800 Volts 3000 to 13800 Volts
  • Frequency At Speed 50 Hz @ 750 / 60 Hz @ 720 50 Hz @ 750 / 60 Hz @ 720
  • Duty Cycle Prime, Continuous Prime, Continuous
  • Ready To Accept Loads (Preheated/Vented) 40 s 40 s
  • Normal Ramp Up To 100% Load 95 s 95 s
  • Emergency Ramp Up 10% To 100% Load 35 s 35 s
  • Genset Efficiency Up To 46.70% 46.70%

Engine Specifications

  • Engine Model CM32C V-Type, 4-stroke-engine CM32C V-Type, 4-stroke-engine
  • Bore 12.6 in 320.0 mm
  • Stroke 18.11 in 460.0 mm
  • Aspiration Turbocharged-aftercooled Turbocharged-aftercooled
  • Engine Rating Range 6000 - 8000 kW 6000 - 8000 kW
  • Configuration 12,16 cylinder 12,16 cylinder
  • Fuel Type Diesel oil / heavy fuel oil (HFO) / crude oil Diesel oil / heavy fuel oil (HFO) / crude oil
  • Swept Volume 2258.0 in³ 37.0 l/cyl
  • Mean Effective Pressure Up To 326.0 psi 22.5 bar

Generator Set Dimensions

  • Length - Minimum 421.0 in 10703.0 mm
  • Length - Maximum 478.0 in 12149.0 mm
  • Width - Minimum 139.0 in 3526.0 mm
  • Width - Maximum 139.0 in 3526.0 mm
  • Height - Minimum 183.0 in 4640.0 mm
  • Height - Maximum 183.0 in 4640.0 mm
  • Dry Weight - Genset (minimum) 251327.0 lb 114.0 ton (US)
  • Dry Weight - Genset (maximum) 317465.0 lb 144.0 ton (US)

Reliable Operation

  • Intensive cooling of key components including exhaust valve seats, injector cooling integrated into lube oil system
  • Reliable, proven and high efficient single turbo charging system
  • Classification society standards ensure high safety and quality
  • Intelligent simplicity ensures a robust engine platform
  • Optimized service schedules enable high availability and long durability

Control & Monitoring

  • Ultrafast start time and load acceptance
  • No engine start limitations
  • Continuous power (base and peak load), prime power, stand-by
  • Part load with high efficiency
  • Monitoring for unattended operation
  • Asset intelligence system

Ease Of Installation

  • Reduced complexity of standard modular design allows an easy installation
  • Low space requirements between the gensets
  • Genset is ready for installation
  • Generator set designed for direct elastic mounting

Ease Of Operation

  • Low fuel and oil consumption
  • Low maintenance requirements
  • Operator and maintenance training courses available

Intelligent Simplicity

  • High reliability, modular design and integral construction reduce the number of components by 40% over conventional designs e.g.:
    - Dry engine block with integrated ducts for lubricating oil and charge air and underslung crankshaft
    - Compact cylinder head design
  • Smart maintenance solutions:
    - Easily removable cylinder heads, quick removable fluid connections
    - Split connecting rods to allow fast and easy piston removal without disturbing the big end bearing
    - Segmental camshaft design
    - Simplified parts spectrum by using single-pipe exhaust gas
    - Engine block free from cooling water
  • State-of-art material ensures long life time

Ease Of Maintenance

  • Smart maintenance solutions allow an easy component accessibility
  • Large inspection openings afford an easy serviceability to core engine internals
  • Core engine components designed for reconditioning and reuse
  • Short maintenance times enable high availability
  • No engine removal necessary for maintenance and overhauls

Fuel

  • Liquid: Light fuel oil (LFO), crude oil and heavy fuel oil (HFO) with fuel quality up to 700 cSt/50°C according to CIMAC H55/K55
  • Dual:
    - Light fuel oil (LFO), crude oil and heavy fuel oil (HFO) with fuel quality up to 700 cSt/50°C according to CIMAC H55/K55
    - Natural gas with methane number > 80 and lower heating value of 28MJ/Nm3
  • Gaseous: Natural gas with methane number > 80 and lower heating value of 31.5 MJ/Nm3

Emissions

  • World bank emission certification (Stage 2)
  • Technische Anleitung (TA) Luft (only gas)
  • Post-emission treatment systems for lower emission requirements available

Expertise & Experience

  • Assistance for planning - delivery - commissioning - operation and service)
  • Expertise and experience for solutions to maximize benefits, e.g. combine heat and power systems (CHP)

CM32C V-Type Standard Equipment

Fuel System

  • Circulation module
  • Gas valve unit (GVU) (only dual fuel (DF) and gas)
  • Pre-pressure module
  • Engine ventilation module (only dual fuel (DF) and gas)
  • Ignition fuel oil module (only dual fuel (DF))
  • Separator module

Lubricating Oil System

  • Piping interface module
  • Combined module: cooling water system and lube oil system
  • Lube oil separator module

Cooling Water System

  • Cooling water system with radiators
  • Piping interface module
  • Combined module: see lube oil system

Starting System

  • Starting air compressor module
  • Starting air receiver module

Combustion Air System

  • Air filter - pulse
  • Air filter - oil bath
  • Air filter - pocket

Exhaust System

  • Exhaust gas ventilation module (only dual fuel (DF) and gas)
  • Oxidation catalytic (Oxicat) converter system
  • Exhaust gas silencer
  • Selective catalytic reduction (SCR) system

Control & Monitoring System

  • Local control panel (LCP)
  • Local data panel (LDP) / generator control panel (GCP)
  • Engine monitoring package
  • Gas leak detection per cylinder (only dual fuel (DF) and gas)
  • Motor control center module (MCC)

Mounting System

  • Elastic mounting - genset/engine

Customer Stories

Discover what’s new and how customers like you are benefiting from our products and services. Check back often for updates.

Promotions

Looking for that perfect piece of used equipment to complement your fleet? Check out our Used Exclusives, featuring new machines every week!

Social

Let’s talk. Connect with us on one of our social channels to start the conversation and see what we’re up to.

Branch Locator

Looking for your nearest branch? Get in touch with us today by contacting one of our branches directly. We’re always ready to help.

Services

When you choose Finning, you have a wide array of support and specialty services to help you get the most from your equipment.

Technology

Integrated technology can help you understand your equipment's output and help extend its lifespan.

Finance

Choose from a range of financing solutions that allow you to purchase equipment, parts, services, and technology when you need it.

Please share your feedback on Finning.com!

Close window

We are committed to providing you with the best site experience possible.  Please take our brief survey to tell us how we are doing.

Thank you in advance for your time!