Menu

DG150-2 (3 Phase)

Select Units

Overview

Producing reliable power measure up to your power standards. All are tested to maximum load before they leave any one of our ISO 9001 certified facilities. The EMCP 4 control panel, with a user-friendly interface, puts our advanced management and diagnostic tools in one. No two power needs are alike, which is why we offer a broad range of accessories and bolt-on system expansion attachments.

Generator Set Specifications

  • Voltage 480 Volts 480 Volts
  • Frequency 60 Hz 60 Hz
  • Natural Gas/LPG Rating 150 ekW / 140 ekW 150 ekW / 140 ekW
  • Emissions/Fuel Strategy U.S. EPA Certified for Stationary Emergency Application U.S. EPA Certified for Stationary Emergency Application
  • Speed 1800 rpm 1800 rpm
  • Natural Gas Rating 150 ekW / 140 ekW 150 ekW / 140 ekW

Engine Specifications

  • Displacement 535.0 in 8.8 l
  • Engine Model 8.8L V8, 4-cycle Gas 8.8L V8, 4-cycle Gas
  • Fuel System Natural Gas / LP Vapor Natural Gas / LP Vapor
  • Aspiration Turbocharged Air-to-Air Aftercooler Turbocharged Air-to-Air Aftercooler
  • Governor Type Electronic Electronic
  • Compression Ratio 10.1:1 10.1:1
  • Bore 4.35 in 110.5 mm
  • Stroke 4.5 in 114.3 mm

Generator Set Dimensions

  • Length 119.6 in 3037.0 mm
  • Width 43.7 in 1110.0 mm
  • Height 65.2 in 1655.0 mm
  • Weight 3563.0 lb 1616.0 kg

Engine

  • Four-stroke-cycle gas engine combines consistent performance and excellent fuel economy with minimum weight

Generator

  • Matched to the performance and output characteristics of Cat engines
  • Industry leading mechanical and electrical design
  • Industry leading motor starting capabilities
  • High Efficiency

EMCP Control Panel

  • User-friendly interface and navigation
  • Scalable system to meet a wide range of installation requirement
  • Expansion modules and site-specific programming for specific customer requirements

Design Criteria

  • The generator set facilitates compliance with NFPA 110 and meets ISO 8528-5 requirements for transient response
  • Cooling system designed to operate in 50˚C/122˚F ambient temperatures with an air flow restriction of 0.5 in. water

UL 2200 / CSA - Optional

  • UL 2200 Listed packages
  • CSA Certified
  • Certain restrictions may apply
  • Consult with your Cat® Dealer

Worldwide Product Support

  • Cat dealers have over 1,800 dealer branch stores operating in 200 countries
  • Your local Cat dealer provides extensive post-sale support, including maintenance and repair agreements

DG150-2 (3 Phase) Standard Equipment

Air Inlet

  • Single element air filter

Cooling

  • Standard ambient temperatures up to 50°C (122°F)
  • Radiator and cooling fan complete with protective guards

Exhaust

  • Exhaust outlet with 2.5” pipe

Fuel

  • Dual lock off valves
  • Natural Gas or LP Vapor
  • NPT connection

Generator

  • IP23 Protection
  • Matched to the performance and output characteristics of Cat engines
  • Integrated Voltage Regulator

Governor

  • Electronic governor (non adjustable)

Control Panel

  • EMCP 4.2 Series generator set controller

Mounting

  • Rubber vibration isolators

Starting/Charging

  • 12 volt starting motor
  • Batteries with rack and cables

DG150-2 (3 Phase) Optional Equipment

Generator

  • Anti-condensation heater
  • Excitation: [ ] Permanent Magnet Excited (PM)
  • Oversize and premium generators

Starting/Charging

  • Battery charger – UL Listed 10 amp
  • Lube oil sump heater
  • Jacket water heater
  • Battery heater

General

  • Automatic transfer switches (ATS)
  • UL 2200 package
  • Suitable for Use as Service Equipment (SUSE)
  • CSA Certification
  • Enclosures: sound attenuated, weather protective

Customer Stories

Discover what’s new and how customers like you are benefiting from our products and services. Check back often for updates.

Promotions

Looking for that perfect piece of used equipment to complement your fleet? Check out our Used Exclusives, featuring new machines every week!

Social

Let’s talk. Connect with us on one of our social channels to start the conversation and see what we’re up to.

Branch Locator

Looking for your nearest branch? Get in touch with us today by contacting one of our branches directly. We’re always ready to help.

Services

When you choose Finning, you have a wide array of support and specialty services to help you get the most from your equipment.

Technology

Integrated technology can help you understand your equipment's output and help extend its lifespan.

Finance

Choose from a range of financing solutions that allow you to purchase equipment, parts, services, and technology when you need it.