Photovoltaic Module PVC

Cat PVC Photovoltaic Module Bifacial Halfcut

Microgrid

Specifications

Benefits & Features

Equipment

Downloads

The mono crystalline bifacial dual glass halfcut PERC (passivated emitter rear cell) photovoltaic modules provide excellent performance with low temperature coefficient. The modules provide high efficiency and power per module, maximizing energy capture.

Compare Models

US
Metric

Technical Summary

Application Compatible with 1000V and 1500V plant architectures Compatible with 1000V and 1500V plant architectures

Module Type Mono crystalline bifacial halfcut PERC Mono crystalline bifacial halfcut PERC

Nominal Power 425W to 455W per panel 425W to 455W per panel

Higher Efficiency

See more

Higher Efficiency

The panel design provides excellent performance under low temperature or low light environment.

Increase Energy Production

See more

Increase Energy Production

Reduced resistive losses and an optimized electrical design result in higher energy yield.

More durable / Reliable

See more

More durable / Reliable

Durability tested for mechanical load; Dynamic + Thermal Cycle + Humidity Freeze
Harsh evironments; salt mist, amonia, dust and sand.

25 year power output warranty

See more

Warranty

Standard 25 year warranty on manufacturer defects and a 25 year power output warranty

Tests and Certificates

See more

Tests and Certificates

IEC 61215, IEC 61730 Class C according to UL790
UL 61730 Type 3 fire rating
IEC 61701 (maximum severity) Salt Spray Test
IEC62716 Ammonia Test
IEC 60068, Dust and Sand test
Listings: TUV SUD, CSA, CE
ISO 9001:2008: ISO Quality Management System
ISO 14001:2004: ISO Environment Management System
TS62941: Guideline for module design qualification and type approval
OHSAS 18001: 2007 Occupational Health and Safety

Cat PVC Photovoltaic Module Bifacial Halfcut Standard Equipment

Power assurance program for linear power output.

Produces more than 97.5% power in the first year and after 25 years 85.5%.

Durability Test Cycle (accelerated tests)

2000 hrs damp heat testing is twice the standard testing hrs. required

600 thermal cycling testing is three times the standard cycles required.

192 hrs of PID (potential-induced degradation) at 85°C/85RH) is twice the standard testing hrs. required.

Mechanical Load testing for Dynamic + Thermal Cycle + Humidity Freeze result in much less cell breakage and power loss than static testing alone.

60-100 kWh/m2 LID (light-induced- degradation) validates early hour performance.

LeTID (light and elevated temperature degradation) is a proprietary validation for long term PERC performance.

Validated for use in harsh environment by IEC testing for salt mist, amonia, dust and sand.

Resources for Cat PVC Photovoltaic Module Bifacial Halfcut

Photovoltaic 425W-455W Bifacial Spec Sheet