Menu

C4.4

Select Units

Overview

The Cat® C4.4 Industrial Diesel Engine is offered in ratings ranging from 82-150 bkW (109-200 bhp) @ 2200 rpm, which meet U.S. EPA Tier 4 Final, EU Stage V emission standards. Industries and applications powered by C4.4 engines include: Agriculture, Aerial Lifts, Aircraft Ground Support, Bore/Drill Rigs, Chippers/Grinders, Compactors/Rollers, Compressors, Construction, Cranes, Crushers, Feller Bunchers, Forestry, Forklifts, General Industrial, Harvesters, Hydraulic Power Units, Irrigation Equipment, Loaders/Forwarders, Material Handling, Mining, Mobile Earthmoving Equipment, Mobile Sweepers, Paving Equipment, Pumps, Skidders, Specialty Ag Equipment, Sprayers, Trenchers, Turf and Landscaping and Underground Mining Equipment.

Power Rating

  • Maximum Power 200.0 HP 150.0 kW
  • Maximum Torque 609.0 lb-ft @ 1400 rpm 825.0 Nm @ 1400 rpm
  • Rated Speed 2200 rpm 2200 rpm
  • Minimum Power 109.0 HP 82.0 kW

Emission Standards

  • Emissions U.S. EPA & CARB Tier 4 Final, EU Stage V U.S. EPA & CARB Tier 4 Final, EU Stage V

General

  • Engine Configuration Inline 4, 4-Stroke-Cycle Diesel Inline 4, 4-Stroke-Cycle Diesel
  • Bore 4.1 in 105.0 mm
  • Stroke 5.0 in 127.0 mm
  • Displacement 268.5 in³ 4.4 l
  • Compression Ratio 16.5:1 16.5:1
  • Aspiration Turbocharged Aftercooled (TA) or Series Turbocharged Aftercooled (TTA) Turbocharged Aftercooled (TA) or Series Turbocharged Aftercooled (TTA)
  • Combustion System Direct Injection Direct Injection
  • Rotation from Flywheel End Counterclockwise Counterclockwise
  • Aftertreatment DOC+DPF+SCR DOC+DPF+SCR

Engine Dimensions - Approximate

  • Length 32.4 in 822.0 mm
  • Width 29.6 in 748.0 mm
  • Height 35.3 in 897.0 mm
  • Weight - Net Dry - Basic Operating Engine Without Optional Attachments 1180.0 lb 535.0 kg

Aftertreatment Dimensions

  • Length 26.5 in 675.0 mm
  • Width 24.5 in 623.0 mm
  • Height 17.8 in 453.0 mm
  • Weight 143.3 lb 65.0 kg

Installation

A modular and compact core on the Cat C4.4 makes installing the engine on any number of machine applications a relative breeze. And when downsizing from five-liter platforms, OEMs can see a 20% reduction in length, 5% reduction in height and 40% reduction in weight of the engine, significantly reducing installation costs.

Advanced Features

With a 15% increase in power density and 10% increase in torque when compared to its predcessor engine, the compact design of the Cat C4.4 reduces heat loss for more efficient engine output, so operators can conquer even the toughest tasks with relative ease.

Ideal Applications

Industrial, agricultural and construction applications such as: Pumps • Compressors • Chippers • Grinders • Asphalt paving equipment • Hydraulic power units • Bore rigs • Drill rigs • Tractors.

Total Cost of Ownership

There's a lot that can affect the lifetime cost of ownership on your engine. It can be as simple as fluid intake and as complex as weight distribution. Either way, the Cat C4.4 has it covered. When compared to similar 6-cylinder plaforms, the C4.4 saves more than 18% in fluid consumption and is specially balanced to be its most effective, every day.

Cat Dealer Product Support

The Cat C4.4 make maintenance and service routines simple thanks to scheduled maintenance and worldwide dealer support. Cat engine owners can also enjoy the peace of mind engine a five-year warranty brings.

Safety

Built-in clean emissions modules keep the Cat C4.4 performing at its peak while also keeping the air around the work site cleaner.

C4.4 Standard Equipment

Air Inlet System

  • Standard air cleaners

Control System

  • Full electronic control system, all connectors and wiring looms waterproof and designed to withstand harsh off-highway environments
  • Flexible and configurable software features and well-supported SAE J1939 CAN bus enables highly integrated machines

Cooling System

  • Top tank temperature 108° C (226° F) as standard to minimize cooling pack size
  • 50:50 water glycol mix

Flywheels and Flywheel Housing

  • Fitted with SAE3 configuration as standard

Fuel System

  • Electronic high pressure common rail
  • Innovative filter design to ensure maximum protection of the engine

Lube System

  • Wide choice of sumps for different applications

Power Take Off

  • SAE A and SAE B flanges on left-hand side. Additional SAE A flange available on left-hand side. Engine power can also be taken from the front of the engine on some applications. Factory fitted compressors are also available.

General

  • Available with or without a balancer
  • Paint: Caterpillar yellow, with optional colors available at request

U.S. EPA Tier 4 Final, EU Stage V Aftertreatment/ Clean Emissions Control Equipment

  • Clean Emissions Module (CEM), consisting of Diesel Particulate Filter (DPF) and Diesel Oxidation Catalyst (DOC)
  • Selective Catalytic Reduction (SCR)
  • 3" flex pipe connection with straight, 45°, and 90° options for flexibility

Customer Stories

Discover what’s new and how customers like you are benefiting from our products and services. Check back often for updates.

Promotions

Looking for that perfect piece of used equipment to complement your fleet? Check out our Used Exclusives, featuring new machines every week!

Social

Let’s talk. Connect with us on one of our social channels to start the conversation and see what we’re up to.

Branch Locator

Looking for your nearest branch? Get in touch with us today by contacting one of our branches directly. We’re always ready to help.

Services

When you choose Finning, you have a wide array of support and specialty services to help you get the most from your equipment.

Technology

Integrated technology can help you understand your equipment's output and help extend its lifespan.

Finance

Choose from a range of financing solutions that allow you to purchase equipment, parts, services, and technology when you need it.