Menu

C2.8

C2.8 Standard Equipment

Air Inlet System

  • Induction manifolds
  • Exhaust manifolds

Control System

  • Starter motor (12V or 24V)
  • Alternator (12V or 24V)
  • Electronic Control Unit (chassis mounted)
  • Engine control sensors and robust wiring harness
  • Data interface via CANbus J1939

Flywheels and Flywheel Housing

  • Flywheel housings – SAE 3 or SAE 4
  • Choice of flywheel to match industry common hydraulic pumps and transmissions
  • Side PTO with SAE A or SAE B interface

Fuel System

  • Fuel filter – preconnected but chassis mounted
  • With water sensor

Lube System

  • Lubricating oil filters
  • High incline oil pan – 35° continuous in all directions

General

  • Cold start capability to -20° C (-4° F) with standard equipment
  • Paint: Caterpillar yellow, with optional colors available at request

Reliable, Quiet and Durable Power

World-class manufacturing capability and processes coupled with proven technologies and extensive field validation assure reliability and durability in tough nonroad applications.

High Performance

Leading edge fuel systems and turbocharging provide high torque even at lower engine speeds.

Fuel Efficiency

Fuel consumption optimized to match the measured operating cycles of a wide range of equipment types.

Broad Application Range

Industry-leading range of factory configurable ratings and options for agricultural, material handling, construction, mining, aircraft ground support, and other industrial applications.

Low Cost Maintenance

Worldwide service delivers ease of maintenance and simplifies the servicing routine. Capable of optimal oil change intervals of 500 hours. The S•O•S℠ program is available from your Cat dealer to determine oil change intervals and provide optimal performance.

Quality

Every Cat engine is manufactured to stringent quality standards in order to assure customer satisfaction.

World-class Product Support Offered Through Global Cat Dealer Network

  • Scheduled maintenance, including SOS℠ sample
  • Customer Support Agreements (CSA)
  • Caterpillar Extended Service Coverage (ESC)
  • Superior dealer service network
  • Extended dealer service network through the Cat Industrial Service Distributor (ISD) program

Select Units

Overview

The Cat® C2.8 Industrial Diesel Engines offer the perfect balance of compact size, reliability, and performance. This engine is offered in ratings ranging up to 55 bkW (74 bhp) @ 2500 rpm. The C2.8 is designed to meet the needs of many industries and applications, including agricultural tractors, aerial lifts, aircraft ground support, bore/drill rigs, chippers/grinders, compactors/rollers, compressors, forestry, irrigation equipment, material handling, mining, earthmoving equipment, paving equipment, pumps, fruit harvesters equipment, turf and underground mining equipment.

Power Rating

  • Minimum Power 74.0 BHP 55.0 bkW
  • Maximum Power 74.0 BHP 55.0 bkW
  • Rated Speed 2200-2500 rpm 2200-2500 rpm

Emission Standards

  • Emissions U.S. EPA Tier 3 Nonroad Equivalent Emission Standards (Not Currently EPA Certified). EU Stage IIIA Nonroad Equivalent Emission Standards (Non-Current for EU) U.S. EPA Tier 3 Nonroad Equivalent Emission Standards (Not Currently EPA Certified). EU Stage IIIA Nonroad Equivalent Emission Standards (Non-Current for EU)

General

  • Engine Configuration Inline 4, 4-Stroke-Cycle Diesel Inline 4, 4-Stroke-Cycle Diesel
  • Bore 90 mm (3.5 in) 90 mm (3.5 in)
  • Stroke 110 mm (4.3 in) 110 mm (4.3 in)
  • Aspiration Turbocharged (T) and Turbocharged Aftercooled (TA) Turbocharged (T) and Turbocharged Aftercooled (TA)
  • Displacement 2.8 L (171 in³) 2.8 L (171 in³)
  • Compression Ratio 17.0:1 17.0:1
  • Combustion System Direct Injection Direct Injection
  • Rotation from Flywheel End Counterclockwise Counterclockwise
  • Lube System - Refill 4 L (1.06 qt) 4 L (1.06 qt)

Engine Dimensions - Approximate

  • Height 766 mm (30.2 in) 766 mm (30.2 in)
  • Length - Rear of Flywheel Housing to Front of Fan Pulley 635 mm (25 in) 635 mm (25 in)
  • Weight - Net Dry - Basic Operating Engine Without Optional Attachments 245 kg (450 lb) 245 kg (450 lb)
  • Width 561 mm (22.1 in) 561 mm (22.1 in)
Customer Stories

Discover what’s new and how customers like you are benefiting from our products and services. Check back often for updates.

Promotions

Looking for that perfect piece of used equipment to complement your fleet? Check out our Used Exclusives, featuring new machines every week!

Social

Let’s talk. Connect with us on one of our social channels to start the conversation and see what we’re up to.

Branch Locator

Looking for your nearest branch? Get in touch with us today by contacting one of our branches directly. We’re always ready to help.

Services

When you choose Finning, you have a wide array of support and specialty services to help you get the most from your equipment.

Technology

Integrated technology can help you understand your equipment's output and help extend its lifespan.

Finance

Choose from a range of financing solutions that allow you to purchase equipment, parts, services, and technology when you need it.

Please share your feedback on Finning.com!

Close window

We are committed to providing you with the best site experience possible.  Please take our brief survey to tell us how we are doing.

Thank you in advance for your time!