160M Motor Grader | Finning CAT

Benefits & Features

Operator Station

Visibility

Good visibility is key to your safety and efficiency. Angled cab doors, tapered engine enclosure and a sloped rear window make it easy to see the moldboard and tires, as well as behind the machine. An optional rear vision camera further enhances lines of sight all around the machine.

Comfort and Control

Experience the most spacious, comfortable cab in the industry. Joystick controls replace levers, so hand and arm movement is reduced by 78%, helping reduce operator fatigue for better productivity. Rocker and control switches are in easy reach. A standard Cat Comfort Series suspension seat is fully adjustable. Control pods can be adjusted electronically so it is even easier to set up for an ideal operating position. Multiple isolation mounts significantly reduce sound and vibration for a more relaxed work environment. The high capacity Heating, Ventilation and Air Conditioning (HVAC) system dehumidifies and pressurizes the cab, circulates fresh air, seals out dust and keeps windows clear. An optional deluxe radio with CD features MP3 and Bluetooth technology.

In-Dash Instrument Cluster

Easy-to-read, high-visibility gauges and warning lamps keep you aware of critical system information. Cat Messenger offers real-time machine performance and diagnostic data to help you get the most from your machine.

Steering and Implement Controls

Operators are more comfortable and productive with two electro-hydraulic joysticks. New and experienced operators around the world report that the controls are easy to learn, and that the new electronically adjustable control pods make it easier to position them for optimal comfort, visibility and proper operation.

Joystick Functions

The left joystick controls steering, articulation, return-to-center, wheel lean, gear selection, left moldboard lift cylinder and float. The right joystick controls drawbar, circle and moldboard functions as well as electronic throttle control and manual differential lock/unlock. Joystick lean angle mirrors the steer tires' turning angle. A brake tensioning system holds the joystick in position until the operator moves it. The steering control automatically reduces steering sensitivity at higher ground speeds for predictable control. Infinitely variable roller switches control the rear ripper and/or front lift group (when equipped).

Electronic Throttle Control

Electronic Throttle Control helps improve productivity by providing the best match of horsepower and torque for the demands of the application.

Articulation Return-to-Center

Automatically returns the machine to a straight frame position from any angle with the touch of a button.

Engine

Cat C9 ACERT engine gives you the performance you need to maintain consistent grading speeds for maximum productivity. Superior torque and lugging capability provide the power to pull through sudden, short-term increases in loads. ACERT Technology lowers combustion chamber temperatures and optimizes fuel combustion to generate more work output for your fuel cost. ACERT engines also generate fewer emissions to meet the needs of equipment owners around the world.

Hydraulic Demand Fan

The hydraulic demand fan automatically adjusts speed according to engine cooling requirements. When cooling demand is reduced, you benefit from more power to the ground and improved fuel efficiency.

Engine Idle Shutdown Timer

This standard feature can be software-enabled by your Cat dealer to shut down the engine after a set period of time to save you fuel and help reduce emissions.

Power Train

We designed the M Series Motor Graders to give you efficiency and longevity in your most demanding applications.

Standard Automatic Differential Lock/Unlock unlocks the differential during a turn and re-locks when straight for easier operation and to help protect the power train.
Full Electronic Clutch Pressure Control system optimizes inching modulation for smooth shifts and directional changes, reducing stress on gears.
Programmable Autoshift option simplifies operation by allowing the operator to program the transmission to shift at optimal points to match your application.
Power Shift Countershaft Transmission is matched to the Cat engine to maximize power to the ground.
Wide operating gear range for maximum productivity.
Engine Over-Speed Protection prevents downshifting until an acceptable safe travel speed has been established.

Front and Rear Axles

The sealed spindle keeps front axle bearings lubricated and protected from contaminants. The Cat “Live Spindle” design places the larger tapered roller bearing on the outside, where the load is greater, extending bearing life. A bolt-on modular rear axle improves serviceability and contamination control with easy access to differential components.

Hydraulic Brakes

Oil-bathed multi-disc service brakes are hydraulically actuated for smooth, predictable braking and lower operating costs. Brakes are located at each tandem wheel and have a large total brake surface area to give you dependable stopping power and longer life.

Structures and Drawbar-Circle-Moldboard

Caterpillar designs motor grader frame and drawbar components to give you performance and durability. The one-piece forged steel circle stands up to high stress loads, and a sacrificial wear system helps keep your service time and costs down. The articulation hitch features a large tapered roller bearing to carry loads evenly and smoothly. It is sealed to prevent contamination and a locking pin prevents articulation for safety during service or transport.

Easy Maintenance for More Uptime

The M Series drawbar, circle and moldboard are designed to make it easy for you to keep the components tight. Shims and patented top-adjust wear strips are easy to add or replace, dramatically reducing downtime. Durable nylon composite wear inserts maximize circle torque and component life. Sacrificial brass wear strips between the blade mounting group and moldboard can be easily adjusted and replaced. Shimless Moldboard Retention System uses vertical and horizontal adjusting screws to keep moldboard wear strips aligned for reduced blade chatter and precise blade control.

Blade Angle and Moldboard

An aggressive blade angle, optimized moldboard curvature and large throat clearance help you work more efficiently by allowing material to roll more freely along the blade. Heat-treated rails, hardened cutting edges and end bits, and heavy duty bolts to give you greater moldboard reliability and long service life. The link bar allows extreme moldboard positioning for easier bank sloping and ditch cutting/cleaning.

Hydraulics

Responsive Hydraulics

A proven load-sensing system and advanced electro-hydraulics give you superior implement control and responsive hydraulic performance that helps make your operator's job easier. Continuously matching hydraulic flow/pressure to power demands creates less heat and reduces power consumption.

Consistent, Predictable Movement - Proportional Priority Pressure-Compensating (PPP-C) valves have different flow rates for the head and rod ends of the cylinder, so you can count on consistent, predictable implement response.
Balanced Flow - Hydraulic flow is proportioned to give you confidence that all implements will operate simultaneously without slowing the engine or speed of some implements.

Blade Float

Allows the blade to move freely under its own weight. By floating both cylinders, the blade can follow the contours of the ground. Floating only one cylinder permits the toe of the blade to follow a hard surface while the operator controls the slope with the other lift cylinder.

Independent Oil Supply

Large, separate hydraulic oil supplies prevent cross-contamination and provide proper oil cooling, which reduces heat build-up and extends component life. Cat XT™ hose allows high pressures for maximum power and reduced downtime.

Integrated Technologies

Cat Grade Control

Cat Grade Control Cross Slope is an optional fully integrated, factory installed system that helps your operator more easily maintain desired cross slope by automatically controlling one side of the blade. The system is job-ready from day one, and scalable for the future with AccuGrade™ upgrade kits that provide additional 2D and/or 3D control.

AccuGrade Attachment Ready Option

An AccuGrade Attachment Ready Option can be ordered as a factory- or dealer-installed option. It includes built-in mounting points and internal wiring, to make installation of the AccuGrade grade control system faster and easier.

Cat AccuGrade

AccuGrade uses positioning and guidance technologies, machine sensors, and automatic blade control to help your operators get to grade faster, easier and more efficiently. Digital design plans, real-time cut/fill data, and in-cab guidance give operators detailed information to work more confidently and achieve greater accuracy, in fewer passes, using less material. Operators can stay on grade and improve productivity and accuracy by nearly 50 percent over conventional methods. Grade stakes and checkers are minimized, helping to make the work site safer and more cost effective. AccuGrade technologies include Cross Slope, Sonic, Laser, GPS, and/or Universal Total Station (UTS).

Cat Product Link™

Product Link helps take the guesswork out of equipment management with remote monitoring capabilities for one machine or your entire fleet. Track asset location, hours, fuel usage, diagnostic codes, idle time and more through the secure VisionLink™ user interface. Knowing where your equipment is, what it's doing and how it's performing enables you or your Cat dealer to manage your fleet in real-time so you can maximize efficiency, improve productivity and lower operating costs.* *Product Link licensing not available in all areas. Please consult your Cat dealer for availability.

Safety

Operator Presence Monitoring System

System keeps the parking brake engaged and hydraulic implements disabled until the operator is seated and the machine is ready for operation.

Speed Sensitive Steering

Steering becomes less sensitive as ground speed increases for greater operator confidence and control.

Secondary Steering System

An electric hydraulic pump automatically engages in case of a drop in steering pressure so the operator can steer the machine to a stop.

Hydraulic Lockout

Hydraulic lockout disables all implement functions while still providing machine steering control. This is especially useful while roading.

Brake Systems

Brakes are located at each tandem wheel to eliminate braking loads on the power train. Redundant brake systems utilize accumulators to enable stopping in case of machine failure.

Walkways and Grab Rails

Perforated steel tandem walkways and convenient grab rails give you a sturdy platform when moving on, off and around the machine.

Circle Drive Slip Clutch

Circle Drive Slip Clutch protects the drawbar, circle and moldboard from shock loads if the blade encounters an immovable object and also reduces the possibility of abrupt directional changes in poor traction conditions.

Blade Lift Accumulators

Blade Lift Accumulators help absorb impact loads by allowing vertical blade travel. This optional feature helps reduce wear and also helps reduce impact loading for enhanced operator safety.

M Series Safety Features

Rearview camera with in-cab monitor
Grouped, ground level service points
Laminated front window glass
Optional LED Lighting
Ground-level electrical disconnect switch
Ground-level engine shutoff switch
Anti-glare paint eases night operation
Front and rear fenders

Serviceability and Customer Support

Cat motor graders are designed to help you increase uptime and reduce costs. Grouped service points and extended service intervals save maintenance time. A standard Automatic Lubrication System maintains proper grease on working surfaces, increasing component life and purging contaminants from pins and bushings to help prevent damage. Standard Fast-Fill allows customers to refuel in less than four minutes so you can get back on the job quickly.

Unparalleled Dealer Support

When it comes to supporting you, Cat dealers are second to none. From machine selection and purchase to maintenance support and rebuilds, Cat dealers have the experience and capabilities to help keep you up and running.

Smart Machine Systems

Cat Messenger, combined with full systems integration, enhances diagnostic capability for quick analysis of critical data.
Electronic Technician (Cat ET) lets service technicians access stored diagnostic data and configure machine parameters through the Cat Data Link.
Low Battery Elevated Idle raises idle speed when low system voltage is detected, ensuring adequate system voltage and improving battery reliability.
Automatic Engine Deration protects the engine by automatically lowering engine torque output and alerting the operator if critical conditions are detected.

Work Tools and Attachments

Moldboard Options

The 160M motor grader comes equipped with a 3.7 m (12 ft) moldboard. Optional 4.3 m (14 ft) and 4.9 m (16 ft) blades are available, as well as left side extensions for greater versatility.

Ground Engaging Tools (GET)

A variety of tools are available from Cat Work Tools, including cutting edges, graderbits and end bits, all designed for maximum service life and productivity.

Front Mounted Groups

A front mounted push plate or front lift group are available. The front lift group can be combined with a front dozer blade or front scarifier for added versatility.

Rear Ripper/Scarifier

Made to penetrate tough material fast and rip thoroughly for easier movement with the moldboard. The ripper includes three shanks (with holders for five). Nine scarifier shanks can also be added for additional versatility.

Sustainability

Fuel Efficiency

• Integrated machine systems and technologies improve productivity for greater accuracy, allowing the machine to do more work per gallon of fuel.

Green House Gas Emissions

• Reduced fuel consumption means reduced CO2 emissions.

Material Efficiency and Lifecycle Costs

Replaceable wear parts save maintenance time and cost, and extend major component life.
Major components are built to be rebuilt, eliminating waste and saving customers money by giving the machine and/or major components a second - and even third-life.
Approximately 95% of machine materials can be recycled (ISO 16714) to conserve valuable natural resources and further enhance machine end-of-life value.

Sound

• Reduced engine noise and quieter cabs mean lower operator and spectator sound levels.

Safety

Ecology drains help make draining fluids more convenient and help prevent spills.
Cartridge style hydraulic fluid filters provide safe clean draining of filters prior to replacement, helping to prevent fluid spills.
A variety of safety features help safeguard operators and others on the job site.

Equipment

160M Standard Equipment

POWER TRAIN

Air cleaner, dual stage, dry type, diesel, with automatic engine derate and automatic dust ejector, service indicator through Cat Messenger
Air-to-air after cooler (ATAAC)
Belt, serpentine, automatic tensioner
Brakes, oil disc, four-wheel, hydraulic
Demand fan, hydraulic
Differential Lock/Unlock, Automatic
Drain, engine oil, ecology
Electronic over speed protection
Engine Cat C9 with ACERT Technology, diesel, with automatic engine derate and idle control. Note: Engine meets non-current U.S. EPA Tier 3 or EU Stage IIIA emission standards.
Engine Idle Shutdown (EIS)
Fuel tank, 416 L (110 gal), ground level access and sediment drain
Fuel-water separator
Muffler, underhood
Parking brake - multi-disc, sealed, oil‑cooled
Priming pump, fuel
Rear axle, modular
Sediment drain, fuel tank
Tandem drive
Transmission, 8F/6R, power shift, direct drive
Variable Horsepower Plus (VHP Plus)

ELECTRICAL

Alarm, back up
Alternator, 80 ampere, sealed
Batteries, maintenance free, heavy duty, 1,125 CCA
Breaker panel, ground accessible
Cab harness and electrical hydraulic valves
Electrical system, 24V
Grade Control Ready - Cab harness, software, electrical hydraulic valves, bosses and brackets
Lights, roof-mounted roading, reversing, LED stop and tail
Product Link Ready
Starter, electric

OPERATOR ENVIRONMENT

Accelerator
Air conditioning with heater
Arm and wrist rest, electronically adjustable
Articulation, automatic Return-to-Center
Cat Messenger operator information system
Centershift pin indicator
Coat hook
Cup holder
Display, digital speed and gear
Doors, left and right side with wiper
Gauge, machine level
Gauge cluster (analog) - fuel, articulation, engine coolant temp, engine RPM, hydraulic oil temp
Hour meter, digital
Joystick hydraulic controls right/left blade lift with float position, circle drive, blade sideshift and tip, centershift, front wheel lean, articulation and steering
Joystick, adjustable armrests
Joystick gear selection
Joystick hydraulic power steering
Ladders, cab, left and right side
Lights, night time cab
Mirror, inside rearview, wide angle
Power port, 12V
Radio Ready, Entertainment
ROPS cab, sound suppressed
Seat, cloth-covered, comfort suspension
Seat belt, retractable 76 mm (3 in)
Storage area for cooler/lunchbox
Throttle control, electronic
Windows, laminated glass: - fixed front with intermittent wiper - side and rear (3)

FLUIDS

Antifreeze
Extended Life Coolant to -35° C (-30° F)

TIRES, RIMS AND WHEELS

Partial allowance for tires on 254 × 607 mm (10 × 24 in) multi-piece rims is included in the base machine price and weight

OTHER STANDARD EQUIPMENT

Accumulators, brake, dual certified
Anti-glare paint
Bumper, rear, integrated with hitch
CD ROM Parts Book
Clutch, circle drive slip
Cutting edges: - 152 × 16 mm (6 × 5/8 in) - curved DH-2 steel - 19 mm (3/4 in) mounting bolts
Doors (3), engine compartment, locking
Drawbar - 6 shoes, replaceable wear strips
Electrical hydraulic valves, hydraulic lines for base 8 functions
Endbits: - 16 mm (5/8 in) DH-2 steel - 19 mm (3/4 in) mounting bolts
Fluid check, ground level
Frame, articulated, with safety lock
Ground level engine shutdown
Ground level fueling
Hammer (emergency exit)
Horn, electric
Hydraulic lines for base functions
Lockout, hydraulic implement (for roading and servicing)
Moldboard - 3658 × 610 × 22 mm (12 ft × 24 in × 7/8 in)
Mounting, cab roof accessories
Pump, hydraulic, high capacity, 98 cm³ (6 in³)
Radiator, cleanout access
Secondary steering
Serviceability, left-hand side
S•O•SSM ports: engine, hydraulic, transmission, coolant, fuel
Tandem walkway/guards
Tool box
Tow hitch

160M Optional Equipment

ELECTRICAL

Alternator, 150 ampere
Batteries: extreme duty, 1,400 CCA
Converter, communication (CB)
Lights: Headlights, high
Lights: Headlights, low
Lights: Working lights, basic
Lights: Working lights, plus, LED
Lights: Warning: beacon or strobe
Lights: Mounting for warning light

GUARDS

Articulation guard
Axle hose guard
Fenders, front
Fenders, rear
Sound guard (bottom)
Transmission guard

OPERATOR ENVIRONMENT

Deluxe CD radio with MP3 and Bluetooth technology
Fan, defroster, rear window
Mirrors, outside: heated 24V
Mirrors, outside: mounted
Precleaner, HVAC
Radio ready, AM/FM
Seat, air suspension, cloth
Shade, sun
Wiper/washer, rear

POWER TRAIN

Precleaner, snow/debris
Transmission, autoshift

OTHER ATTACHMENTS

AccuGrade ARO
Accumulators, blade lift
Camera, rearview
Cat Grade Control Cross Slope
Cat Product Link 321 (Satellite)
Cat Product Link 522 (Cellular)
Compressor/tank, air
Heater, engine coolant: 120V
Heater, engine coolant: 240V
Hydraulic arrangements with one or more additional hydraulic valves are available for ripper, dozer, snow wings, front lift group, mid-mount scarifier.
Security system
Snow wing mounting, frame ready
Sound suppression
Starting aid, ether

WORK TOOLS/GROUND ENGAGING TOOLS

Blade extension, left hand, 610 mm (2 ft)
Endbits, overlay
Front lift group, mounting
Front lift group
Mid-Mount Scarifier, Package
Mid-Mount Scarifier, Mounting
Moldboard: 4267 × 610 × 22 mm (14 ft × 24 in × 7/8 in)
Moldboard: 4267 × 686 × 25 mm (14 ft × 27 in × 1 in)
Moldboard: 4877 × 686 × 25 mm (16 ft × 27 in × 1 in)
Push plate
Ripper, mounting
Ripper, rear
Ripper tooth
Scarifier, front

MACHINE ARRANGEMENTS

Snow Arrangement

OPTIONAL TIRE ARRANGEMENTS

Rim Size - 10 x 24; Wheel Group - Multi-Piece; Tires - 14R24
Rim Size - 14 x 25; Wheel Group - Multi-Piece; Tires - 17.5R25

Specifications

Select Units

US
Metric

Overview

The M Series Motor Grader has become the industry standard in operational efficiency and overall productivity. From building roads to maintaining them, M Series Motor Graders are designed to help you get more work done in less time. Unprecedented operator comfort and ease of service help to maximize your return on investment.

Engine

Base Power (1st Gear) - Net 213.0 HP 159.0 kW
Engine Model Cat® C9 ACERT™ Cat® C9 ACERT™
Bore 4.4 in 112.0 mm
Stroke 5.9 in 149.0 mm
Speed at Rated Power 2,000 rpm 2,000 rpm
Base Power (1st Gear) - Net - Metric 216.0 HP 159.0 kW
Maximum Torque - VHP Plus 912.0 lb/ft 1237.0 N·m
Torque Rise - VHP Plus 40% 40%
VHP Plus Range - Net 159-185 kW (213-248 hp) 159-185 kW (213-248 hp)
VHP Plus Range - Net - Metric 159-185 kW (216-251 hp) 159-185 kW (216-251 hp)
Displacement 537.0 in³ 8.8 l
Number of Cylinders 6 6
Derating Altitude 10000.0 ft 3048.0 m
Standard - Fan Speed - Maximum 1,450 rpm 1,450 rpm
Standard - Fan Speed - Minimum 600 rpm 600 rpm
Standard - Ambient Capability 109.0 °F 43.0 °C
High Ambient - Fan Speed - Maximum 1,650 rpm 1,650 rpm
High Ambient - Fan Speed - Minimum 600 rpm 600 rpm
High - Ambient Capability 122.0 °F 50.0 °C

Power Train

Forward/Reverse Gears 8 Forward/6 Reverse 8 Forward/6 Reverse
Transmission Direct drive, power shift, countershaft Direct drive, power shift, countershaft
Brakes - Service Multiple oil disc Multiple oil disc
Brakes - Service - Surface Area 3565.0 in² 23000.0 cm²
Brakes - Parking Multiple oil disc Multiple oil disc
Brakes - Secondary Dual circuit control system Dual circuit control system

Hydraulic System

Circuit Type Electro-hydraulic load sensing, closed center Electro-hydraulic load sensing, closed center
Pump Type Variable piston Variable piston
Pump Output 55.7 gal/min 210.0 l/min
Maximum System Pressure 3500.0 psi 24150.0 kPa
Standby Pressure 450.0 psi 3100.0 kPa

Operating Specifications

Top Speed - Forward 29.5 mile/h 47.4 km/h
Top Speed - Reverse 23.3 mile/h 37.4 km/h
Turning Radius - Outside Front Tires 24.93 ft 7.6 m
Steering Range - Left/Right 47.5 degrees 47.5 degrees
Articulation Angle - Left/Right 20 degrees 20 degrees
Forward - 1st 2.5 mile/h 4.1 km/h
Forward - 2nd 3.5 mile/h 5.6 km/h
Forward - 3rd 5.0 mile/h 8.1 km/h
Forward - 4th 7.0 mile/h 11.2 km/h
Forward - 5th 10.8 mile/h 17.4 km/h
Forward - 6th 14.7 mile/h 23.7 km/h
Forward - 7th 20.3 mile/h 32.6 km/h
Forward - 8th 29.5 mile/h 47.4 km/h
Reverse - 1st 2.0 mile/h 3.3 km/h
Reverse - 2nd 3.8 mile/h 6.1 km/h
Reverse - 3rd 5.5 mile/h 8.8 km/h
Reverse - 4th 8.5 mile/h 13.7 km/h
Reverse - 5th 16.0 mile/h 25.7 km/h
Reverse - 6th 23.3 mile/h 37.4 km/h

Service Refill

Fuel Capacity 110.0 gal (US) 416.0 l
Cooling System 10.6 gal (US) 40.0 l
Hydraulic System - Tank 16.9 gal (US) 64.0 l
Transmission - Differential - Final Drives 17.2 gal (US) 65.0 l
Engine Oil 7.9 gal (US) 30.0 l
Tandem Housing - Each 21.1 gal (US) 80.0 l
Front Wheel Spindle Bearing Housing 0.13 gal (US) 0.5 l
Circle Drive Housing 1.8 gal (US) 7.0 l

Frame

Drawbar - Width 3.0 in 76.2 mm
Circle - Diameter 61.1 in 1553.0 mm
Circle - Blade Beam Thickness 1.6 in 40.0 mm
Drawbar - Height 6.0 in 152.0 mm
Front Frame Structure - Height 12.0 in 305.0 mm
Front Frame Structure - Thickness 0.6 in 16.0 mm
Front Frame Structure - Width 12.0 in 305.0 mm
Front Axle - Height to Center 22.5 in 571.0 mm
Front Axle - Wheel Lean - Left/Right 18 degrees 18 degrees
Front Axle - Total Oscillation per Side 32 degrees 32 degrees

Tandems

Height 22.5 in 572.0 mm
Width 8.0 in 204.0 mm
Sidewall Thickness - Inner 1.0 in 25.0 mm
Sidewall Thickness - Outer 0.7 in 18.0 mm
Drive Chain Pitch 2.0 in 50.8 mm
Wheel Axle Spacing 60.0 in 1523.0 mm
Tandem Oscillation - Front Up 15 degrees 15 degrees
Tandem Oscillation - Front Down 25 degrees 25 degrees

Moldboard

Blade Width 12.0 ft 3.7 m
Arc Radius 16.3 in 413.0 mm
Throat Clearance 3.7 in 95.0 mm
Cutting Edge Width 6.0 in 152.0 mm
Cutting Edge Thickness 0.6 in 16.0 mm
End Bit - Width 6.0 in 152.0 mm
End Bit - Thickness 0.6 in 16.0 mm
Blade Pull - Base GVW 24494.0 lb 11110.0 kg
Blade Pull - Maximum GVW 32310.0 lb 14656.0 kg
Down Pressure - Base GVW 16936.0 lb 7682.0 kg
Down Pressure - Maximum GVW 28998.0 lb 13153.0 kg
Height 24.0 in 610.0 mm
Thickness 0.87 in 22.0 mm
Width 12.0 ft 3.7 m

Blade Range

Circle Centershift - Right 28.7 in 728.0 mm
Circle Centershift - Left 27.4 in 695.0 mm
Moldboard Sideshift - Right 37.4 in 950.0 mm
Moldboard Sideshift - Left 32.3 in 820.0 mm
Maximum Blade Position Angle 90 degrees 90 degrees
Blade Tip Range - Forward 40 degrees 40 degrees
Blade Tip Range - Backward 5 degrees 5 degrees
Maximum Lift Above Ground 17.8 in 452.0 mm
Maximum Depth of Cut 29.5 in 750.0 mm
Maximum Shoulder Reach Outside of Tires - Left 82.3 in 2090.0 mm
Maximum Shoulder Reach Outside of Tires - Right 89.7 in 2278.0 mm

Ripper

Ripper Shank Holder Spacing 21.0 in 533.0 mm
Ripping Depth - Maximum 16.8 in 428.0 mm
Ripper Shank Holders 5 5
Penetration Force 20540.0 lb 9317.0 kg
Pry-Out Force 26259.0 lb 11911.0 kg
Machine Length Increase, Beam Raised 39.2 in 995.0 mm

Scarifier

Front, V-Type, 5 or 11 Tooth - Scarifier Shank Holder Spacing 4.6 in 116.0 mm
Front, V-Type, 5 or 11 Tooth - Scarifier Shank Holders 5/11 5/11
Front, V-Type, 5 or 11 Tooth - Scarifying Depth, Maximum 18.4 in 467.0 mm
Front, V-Type, 5 or 11 Tooth - Working Width 47.4 in 1205.0 mm
Mid, V-Type - Scarifier Shank Holder Spacing 4.6 in 116.0 mm
Mid, V-Type - Scarifier Shank Holders 11 11
Mid, V-Type - Scarifying Depth, Maximum 11.5 in 292.0 mm
Mid, V-Type - Working Width 46.6 in 1184.0 mm
Rear - Scarifying Depth, Maximum 10.5 in 266.0 mm
Rear - Working Width 91.0 in 2300.0 mm
Rear - Scarifier Shank Holders 9 9
Rear - Scarifier Shank Holder Spacing 10.5 in 267.0 mm

Weights

Operating Weight - Typically Equipped 43464.0 lb 19715.0 kg
Gross Vehicle Weight - Typically Equipped 43465.0 lb 19715.0 kg
Gross Vehicle Weight - Maximum - Rear Axle 35900.0 lb 16284.0 kg
Gross Vehicle Weight - Base - Front Axle 9867.0 lb 4475.0 kg
Gross Vehicle Weight - Base - Rear Axle 27215.0 lb 12345.0 kg
Gross Vehicle Weight - Maximum - Total 52794.0 lb 23947.0 kg
Gross Vehicle Weight - Base - Total 37082.0 lb 16820.0 kg
Gross Vehicle Weight - Maximum - Front Axle 16894.0 lb 7663.0 kg
Gross Vehicle Weight - Typically Equipped - Front Axle 12404.0 lb 5626.0 kg
Gross Vehicle Weight - Typically Equipped - Rear Axle 31061.0 lb 14089.0 kg
Gross Vehicle Weight - Typically Equipped - Total 43465.0 lb 19715.0 kg

Dimensions

Height - Top of Cab Product Link 133.0 in 3378.0 mm
Length - Push Plate to Ripper 399.1 in 10136.0 mm
Length - Push Plate to Ripper Retracted 386.5 in 9818.0 mm
Height - Top of Cab 130.2 in 3308.0 mm
Width - Outside Front Tires 98.9 in 2511.0 mm
Length - Front Axle to Mid Tandem 241.1 in 6123.0 mm
Length - Front Tire to Rear of Machine 344.6 in 8754.0 mm
Length - Front Axle to Moldboard 100.5 in 2552.0 mm
Length - Between Tandem Axles 60.0 in 1523.0 mm
Width - Outside Rear Tires 98.9 in 2511.0 mm
Width - Tire Center Lines 84.3 in 2140.0 mm
Height - Front Axle Center 23.5 in 596.0 mm
Height - Exhaust Stack 128.2 in 3256.0 mm
Height - Top of Cylinders 119.7 in 3040.0 mm
Ground Clearance - Rear Axle 13.3 in 339.0 mm

Standards

Brakes ISO 3450:1996 ISO 3450:1996
ROPS/FOPS ISO 3471:2008, ISO 3449:2005 Level II ISO 3471:2008, ISO 3449:2005 Level II
Sound ISO 6394:2008, ISO 6395:2008 ISO 6394:2008, ISO 6395:2008
Steering ISO 5010:2007 ISO 5010:2007

Net Power - VHP Plus

Gear - Forward 1st 213.0 HP 159.0 kW
Gear - Forward 2nd 218.0 HP 162.0 kW
Gear - Forward 3rd 223.0 HP 166.0 kW
Gear - Forward 4th 228.0 HP 170.0 kW
Gear - Forward 5th 233.0 HP 174.0 kW
Gear - Forward 6th 238.0 HP 177.0 kW
Gear - Forward 7th 243.0 HP 181.0 kW
Gear - Forward 8th 248.0 HP 185.0 kW
Gear - Reverse 1st 213.0 HP 159.0 kW
Gear - Reverse 2nd 218.0 HP 162.0 kW
Gear - Reverse 3rd-6th 223.0 HP 166.0 kW

160M

160M

View Product Downloads

Benefits & Features

Operator Station

Steering and Implement Controls

Engine

Power Train

Structures and Drawbar-Circle-Moldboard

Hydraulics

Integrated Technologies

Safety

Serviceability and Customer Support

Smart Machine Systems

Work Tools and Attachments

Sustainability

Equipment

160M Standard Equipment

160M Optional Equipment

Specifications

Overview

Engine

Power Train

Hydraulic System

Operating Specifications

Service Refill

Frame

Tandems

Moldboard

Blade Range

Ripper

Scarifier

Weights

Dimensions

Standards

Net Power - VHP Plus

Customer Stories

Promotions

Social

Branch Locator

Services

Technology

Finance

Please share your feedback on Finning.com!