Menu

7395

Select Units

Overview

Dimensions

  • Dipper Payload 70.0 t 64.0 t
  • Dipper Capacity 20.6-55.8 m3 (27-73 yd3) 20.6-55.8 m3 (27-73 yd3)
  • Note Dependent on application and material density. Dependent on application and material density.

Weights

  • Working Weight - With Dipper and Standard Links 2652000.0 lb 1202927.0 kg
  • Ballast - Furnished By Customer 574000.0 lb 260362.0 kg
  • Note (1) These weights will vary slightly depending upon dipper and optional equipment selection. These weights will vary slightly depending upon dipper and optional equipment selection.
  • Note (2) All specifications are based on a 24 m3 (32 yd3) dipper and standard 213.4 cm (84 in) treads. All specifications are based on a 24 m3 (32 yd3) dipper and standard 213.4 cm (84 in) treads.

Main Structures

  • Crawler Dimensions - Overall Width 213.4 cm (84 in) Treads, Standard 32.75 ft 10.0 m
  • Crawler Dimensions - Overall Width 274.3 cm (108 in) Treads 34.75 ft 10.6 m
  • Ground Bearing Pressure Ground bearing pressure is dependent upon many factors. Ground bearing pressure is dependent upon many factors.
  • Ground Bearing Pressure - 213.4 cm (84 in) Treads - Standard 54.0 psi 371.0 kPa
  • Ground Bearing Pressure - 274.3 cm (108 in) Treads 43.0 psi 296.0 kPa
  • Ground Bearing Pressure - Total Effective Bearing Area (1) 343.0 ft² 32.0 m²
  • Ground Bearing Pressure - Total Effective Bearing Area (2) 442.0 ft² 41.0 m²
  • Hoist A planetary gearbox with dual-output pinions provides the hoist torque transfer from the electric motor to the hoist drum gear. A planetary gearbox with dual-output pinions provides the hoist torque transfer from the electric motor to the hoist drum gear.
  • Planetary Propel Dual-motor independent drive. Dual-motor independent drive.
  • Swing Two planetary gearboxes, each driven by a vertically mounted motor, are located on either side of the revolving frame. Dual-output pinion shafts from each gearbox engage the swing rack. Two planetary gearboxes, each driven by a vertically mounted motor, are located on either side of the revolving frame. Dual-output pinion shafts from each gearbox engage the swing rack.
  • Upper Works Overall Width - Including Standard Walkways 44.25 ft 13.5 m

Optimal Working Ranges*

  • Cutting Height - Maximum 48.75 ft 14.9 m
  • Cutting Radius - Maximum 74.75 ft 22.8 m
  • Dumping Height - With Clearance to Open Dipper Door 30.84 ft 9.4 m
  • Note (1) Optimal working ranges based on loading a Cat® 793F truck. Optimal working ranges based on loading a Cat® 793F truck.
  • Note (2) *All specifications are based on a 24 m3 (32 yd3) dipper and standard 213.4 cm (84 in) treads. *All specifications are based on a 24 m3 (32 yd3) dipper and standard 213.4 cm (84 in) treads.
  • Radius of Level Floor 52.49 ft 16.0 m
  • Revolving Frame Tail Swing Radius 30.51 ft 9.3 m

Lube System

  • Components (1) 6 pumps (4 for open gear lubricant and 2 for grease) located in an insulated, heated, double-walled lube room. 6 pumps (4 for open gear lubricant and 2 for grease) located in an insulated, heated, double-walled lube room.
  • Type Automatic, single-line system for open gear lubricant and grease. Automatic, single-line system for open gear lubricant and grease.
  • Components (2) External fast fill from lower level. External fast fill from lower level.

Electrical

  • Drive IGBT Acutrol drive system. IGBT Acutrol drive system.
  • Note Other voltages available to suit customer requirements. Other voltages available to suit customer requirements.
  • Power Requirements - 50 Hz 6,000V, 6,600V, 7,200V, 11,000V 6,000V, 6,600V, 7,200V, 11,000V
  • Power Requirements - 60 Hz 7,200V 7,200V
  • Power Requirements - Average Power Demand 777-1087 kW (1,042-1,458 hp) 777-1087 kW (1,042-1,458 hp)
  • Power Requirements - Peak power 4165.0 mm H2O 3106.0 kg/mm
  • Power Requirements - Voltage 3 phase, 50/60 Hz, 7,200V 3 phase, 50/60 Hz, 7,200V

Front End

  • Components One piece, forged, seamless tubular dipper handle and wide-spread boom point sheaves equipped with hoist ropes and dipper padlocks to stabilize dipper handle. One piece, forged, seamless tubular dipper handle and wide-spread boom point sheaves equipped with hoist ropes and dipper padlocks to stabilize dipper handle.
  • Crowd Rope Crowd: the crowd machinery is located at the front center of the revolving frame; consisting of a motor, brake, drum and gearing. Plastic-impregnated crowd and retract ropes are used to move the dipper handle fore and aft. Rope Crowd: the crowd machinery is located at the front center of the revolving frame; consisting of a motor, brake, drum and gearing. Plastic-impregnated crowd and retract ropes are used to move the dipper handle fore and aft.
  • Note High impact ropes available as an option High impact ropes available as an option
  • Rope Data - Boom Suspension - Diameter 3.25 in 83.0 mm
  • Rope Data - Boom Suspension - No. 4 4
  • Rope Data - Crowd - Diameter 2.5 in 64.0 mm
  • Rope Data - Crowd - No. 1 1
  • Rope Data - Dipper Trip - Diameter 0.625 in 16.0 mm
  • Rope Data - Dipper Trip - No. 1 1
  • Rope Data - Hoist - Diameter 2.75 in 70.0 mm
  • Rope Data - Hoist - No. 2 2
  • Rope Data - Retract - Diameter 2.5 in 64.0 mm
  • Rope Data - Retract - No. 1 1

News & Events

View the latest company and product news, events and customer stories.

Promotions

View the latest offers available on a range of Cat® equipment and genuine parts.

Social Media

Connect with us to learn more about our company, products, services and customers.

Branch Locations

With branches across the UK & Ireland, you can be sure that we’re never far away.

Services

Effectively manage your equipment to reduce operating costs and improve efficiency.

Technology

Integrated technology can help you understand your equipment's output and help extend its lifespan.

Finance

Quick and easy financing with customised payment plans through Cat Financial.

Please share your feedback on Finning.com!

Close window

We are committed to providing you with the best site experience possible.  Please take our brief survey to tell us how we are doing.

Thank you in advance for your time!