Menu

992K

992K Standard Equipment

POWER TRAIN

  • Air-to-Air After Cooler (ATAAC)
  • Axle oil coolers (front and rear)
  • Brakes, full hydraulic, enclosed, wet multiple disc service brakes and dry parking/secondary brake
  • Case drain filters
  • Demand fan
  • Driveline, electro-hydraulic parking brake
  • Electric fuel priming pump
  • Engine Cat C32 ACERT
  • Ground level engine shutdown
  • Ground level fast fill fuel
  • Ground level transmission lockout
  • Ground level starter lockout
  • Precleaner, engine air intake
  • Radiator, Aluminum Modular (AMR)
  • Starting aid, ether, automatic
  • Throttle lock
  • Transmission, 533 mm (21 in) planetary powershift with 3F/3R with electronic control

ELECTRICAL

  • Alarm, back-up
  • Alternator, 150-amp
  • Batteries, low maintenance
  • Converter, 10-amp, 24V to 12V
  • Deutsch and amp seal terminal connectors
  • Ground level electrical disconnect
  • Ground level starting receptacle for emergency start
  • Light, warning strobe
  • Lights, front and rear, access stairway, turn signals/hazard lights
  • Starter, electric (heavy duty)
  • Starting and charging system, 24V, ECM diagnostic connector

OPERATOR ENVIRONMENT

  • Air conditioner and heater with automatic temperature control
  • Cab, sound suppressed, pressurized, rollover protective structure (ROPS/FOPS), radio ready for (entertainment) includes antenna, speakers, and a 12V converter (24-volt, 10-amp) for use with laptop/cell phone use
  • Camera, rear vision
  • Cigar lighter
  • Coat hook
  • Electro-hydraulic tilt and lift controls
  • Horn, electric
  • Implement and steering lockouts
  • Light, dome (cab)
  • Lunchbox and beverage holders
  • Mirrors, rearview (externally mounted)
  • Seat, Cat Comfort with air suspension
  • Seat belt, 2-point, 76 mm (3 in), minder
  • Steering and transmission lock lever
  • STIC control system
  • Tie-offs on ROPS
  • Tinted glass
  • Trainer seat with 76 mm (3 in) wide lap belt
  • Transmission gear indicator
  • VIMS (Vital Info Management System): – 3G with graphical information display – Cycle timer – External data port – Integral Cat Production Measurement (Cat PM)
  • Wet-arm wipers/washer (front, rear, and corners), intermittent front wipers

SAFETY AND SECURITY

  • Fire suppression ready

OTHER STANDARD EQUIPMENT

  • Automatic lubrication system
  • Bumper service center
  • Couplings, Cat O-ring face seals
  • Doors, service access (locking)
  • Economy mode
  • Emergency platform egress
  • Fenders, steel (front and rear)
  • Fuel, fast fill
  • Grouped hydraulic pressure ports
  • Guards, power train and crankcase
  • Hitch, drawbar with pin
  • Hoses, Cat XT™ and XT-ES
  • Hydraulic oil cooler
  • Impeller clutch
  • Implement and steering ecology drains
  • Mufflers, under hood
  • Oil sampling valves
  • Piston pump case drain filters
  • Service center with ground level electrical and fluids service center
  • Sight gauges: – Steering oil level – Implement oil level – Transmission oil level – Coolant level
  • Stairway, left and right rear access
  • Starter lockout, bumper
  • Steering, load sensing
  • Tie-offs on ROPS
  • Toe kicks
  • Transmission lockout, bumper
  • Vandalism protection caplocks
  • Venturi stacks (2)

992K Optional Equipment

OPERATOR ENVIRONMENT

  • AM/FM/CD/MP3 radio
  • AM/FM/CD/MP3 radio with Bluetooth and satellite ready
  • Sun screen

STARTING AIDS

  • Engine coolant 120V heater
  • Engine coolant 240V heater

MACHINE CONTROL AND GUIDANCE

  • Cat Terrain ready

MISCELLANEOUS ATTACHMENTS

  • Arctic antifreeze for protection to –50° C (–58° F)
  • Diagnostic lines
  • Roading fenders
  • Wheel chocks

Select Units

Overview

Caterpillar first introduced the 992 in 1968. This large wheel loader has been a global leader ever since, building a reputation as a face loader that's both safe to operate, productive and durable. With the introduction of the K Series, we've enhanced the operator's experience and the safety of those working on and around the machine. With both standard and high lift configurations, this machine will pass match with fleets of 775, 777, and 785 trucks. If your operations revolve around the 992 as a loading tool, you'll find everything that's important to your business in the 992K; safety, productivity, cost control and comfort for your people.

Engine

  • Net Power 814.0 HP 607.0 kW
  • Engine Model Cat® C32 ACERT™ Cat® C32 ACERT™
  • Bore 5.7 in 145.0 mm
  • Stroke 6.4 in 162.0 mm
  • Displacement 1963.5 in³ 32.1 l
  • Emissions (Tier 2 Equivalent): Gross Power - SAE J1995 907.0 HP 676.0 kW
  • Emissions (Tier 2 Equivalent): Net Power - SAE J1349 814.0 HP 607.0 kW
  • Emissions (U.S. EPA Tier 4 Final): Gross Power - SAE J1995 900.0 HP 671.0 kW
  • Emissions (U.S. EPA Tier 4 Final): Net Power - SAE J1349 814.0 HP 607.0 kW
  • Emissions (U.S. EPA Tier 4 Final): Net Power - SAE J1995 814.0 HP 607.0 kW
  • Emissions (U.S. EPA Tier 4 Final): Peak Torque at 1,200 rpm - SAE J1995 4765.0 r/min 4765.0 r/min
  • Emissions (U.S. EPA Tier 4 Final): Rated Speed 1750.0 r/min 1750.0 r/min
  • Emissions (Tier 2 Equivalent): Gross Power - ISO 14396 884.0 HP 659.0 kW
  • Emissions (Tier 2 Equivalent): Net Power - SAE J1995 814.0 HP 607.0 kW
  • Emissions (Tier 2 Equivalent): Peak Torque at 1,200 rpm - SAE J1995 4796.0 r/min 4796.0 r/min
  • Emissions (Tier 2 Equivalent): Rated Speed 1750.0 r/min 1750.0 r/min
  • Emissions (U.S. EPA Tier 4 Final): Gross Power - ISO 14396 884.0 HP 659.0 kW
  • Note (Tier 2 Equivalent) (1) These ratings apply at 1,750 rpm when tested under the specified standard conditions. These ratings apply at 1,750 rpm when tested under the specified standard conditions.
  • Note (Tier 2 Equivalent) (2) Rating for net power advertised is based on power available when the engine is equipped with alternator, air cleaner, muffler, and on-demand hydraulic fan drive at maximum fan speed. Rating for net power advertised is based on power available when the engine is equipped with alternator, air cleaner, muffler, and on-demand hydraulic fan drive at maximum fan speed.
  • Note (Tier 4 Final) (1) These ratings apply at 1,750 rpm when tested under the specified standard conditions. These ratings apply at 1,750 rpm when tested under the specified standard conditions.
  • Note (Tier 4 Final) (2) Rating for net power advertised is based on power available when the engine is equipped with alternator, air cleaner, muffler, and on-demand hydraulic fan drive at maximum fan speed. Rating for net power advertised is based on power available when the engine is equipped with alternator, air cleaner, muffler, and on-demand hydraulic fan drive at maximum fan speed.
  • Torque Rise 30% 30%

Operating Specifications

  • Operating Weight 220089.0 lb 99831.0 kg
  • Bucket Capacity Range 10.7-12.3 m3 (14-16 yd3) 10.7-12.3 m3 (14-16 yd3)
  • Rated Payload - High Lift (Face Material) 21.0 t 19.1 t
  • Rated Payload - Standard (Face Material) 24.0 t 21.7 t
  • Operating Weight - High Lift 221847.0 lb 100628.0 kg
  • Operating Weight - Standard 220089.0 lb 99831.0 kg

Transmission

  • Transmission Type Cat Planetary Power Shift Cat Planetary Power Shift
  • Forward - 1 4.3 mile/h 6.9 km/h
  • Forward - 2 7.4 mile/h 11.9 km/h
  • Forward - 3 12.6 mile/h 20.3 km/h
  • Reverse - 1 4.7 mile/h 7.6 km/h
  • Reverse - 2 8.1 mile/h 13.1 km/h
  • Reverse - 3 13.8 mile/h 22.2 km/h
  • Direct Drive - Forward 1 Disabled Disabled
  • Direct Drive - Forward 2 8.0 mile/h 12.9 km/h
  • Direct Drive - Forward 3 14.2 mile/h 22.8 km/h
  • Direct Drive - Reverse 1 4.9 mile/h 7.9 km/h
  • Direct Drive - Reverse 2 8.8 mile/h 14.2 km/h
  • Direct Drive - Reverse 3 15.4 mile/h 24.8 km/h

Hydraulic System - Lift/Tilt

  • Lift Cylinder - Bore 11.0 in 279.4 mm
  • Lift Cylinder - Stroke 45.2 in 1148.0 mm
  • Lift/Tilt System - Circuit Positive Flow Control Positive Flow Control
  • Lift/Tilt System - Pump Variable Displacement Piston Variable Displacement Piston
  • Maximum Flow at 1,850 rpm 254.0 gal/min 960.0 l/min
  • Relief Valve Setting - Lift/Tilt 4500.0 psi 31000.0 kPa
  • Tilt Cylinder - Bore 10.5 in 266.7 mm
  • Tilt Cylinder - Stroke 80.9 in 2055.0 mm

Hydraulic Cycle Times

  • Total Hydraulic Cycle Time 19.3 s 19.3 s
  • Dump 1.8 s 1.8 s
  • Lower Float Down 3.7 s 3.7 s
  • Rack Back 4.4 s 4.4 s
  • Raise 9.4 s 9.4 s

Buckets

  • Bucket Capacities 10.7-12.3 m3 (14-16 yd3) 10.7-12.3 m3 (14-16 yd3)

Axles

  • Front Fixed Fixed
  • Rear Oscillating Oscillating
  • Oscillation Angle 10° ±, 8° ± with Stops 10° ±, 8° ± with Stops

Brakes

  • Brakes Meet ISO 3450:2011 Meet ISO 3450:2011

Sound Performance

  • Hearing Protection Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment. Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.
  • Machine Sound Power Level - Standard Machine Configuration The machine sound power level is 116 dB(A), measured according to the test procedures and conditions specified in ISO 6395:2008 for the standard machine configuration. The measurement was conducted at 70 percent of the maximum engine cooling fan speed. The machine sound power level is 116 dB(A), measured according to the test procedures and conditions specified in ISO 6395:2008 for the standard machine configuration. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.
  • Operator Sound Pressure Level The operator sound pressure level is 70 dB(A), measured according to the test procedures and conditions specified in ISO 6396:2008 for the standard machine configuration. The measurement was conducted at 70 percent of the maximum engine cooling fan speed. The operator sound pressure level is 70 dB(A), measured according to the test procedures and conditions specified in ISO 6396:2008 for the standard machine configuration. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.
  • Machine Sound Power Level - Sound Suppressed Machine Configuration The machine sound power level is 113 dB(A), measured according to the test procedures and conditions specified in ISO 6395:2008 for the sound suppressed machine configuration. The measurement was conducted at 70 percent of the maximum engine cooling fan speed. The machine sound power level is 113 dB(A), measured according to the test procedures and conditions specified in ISO 6395:2008 for the sound suppressed machine configuration. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.

Hydraulic System - Steering

  • Maximum Flow at 1,350 rpm 95.0 gal/min 360.0 l/min
  • Steering Cut Off Pressure 4500.0 psi 31000.0 kPa
  • Steering System - Circuit Pilot, Load Sensing Pilot, Load Sensing
  • Steering System - Pump Piston, Variable Displacement Piston, Variable Displacement
  • Steering Cycle Times - High Idle 4.4 s 4.4 s
  • Steering Cycle Times - Low Idle 6.4 s 6.4 s
  • Total Steering Angle 86° 86°

Service Refill Capacities

  • Fuel Tank 413.0 gal (US) 1562.0 l
  • Transmission 45.0 gal (US) 169.0 l
  • AC Oil 0.071 gal (US) 0.268 l
  • AC Refrigerant 6.0 lb 2.72 kg
  • Cooling Systems 77.0 gal (US) 290.0 l
  • Differential - Final Drives - Front 95.0 gal (US) 360.0 l
  • Differential - Final Drives - Rear 91.0 gal (US) 345.0 l
  • Engine Crankcase 32.0 gal (US) 120.0 l
  • Hydraulic System - Implement 86.0 gal (US) 326.0 l
  • Hydraulic System - Steering 42.0 gal (US) 159.0 l

Dimensions - High Lift - Approximate

  • B-Pin Height - Maximum Lift 24.58 ft 7544.0 mm
  • Clearance at 45° Dump (Tooth Tip) 15.01 ft 4574.0 mm
  • Dump Angle at Maximum Lift 50 degrees 50 degrees
  • Ground to Bumper Clearance 3.86 ft 1176.0 mm
  • Ground to Center of Axles 4.44 ft 1352.0 mm
  • Ground to Lower Hitch Clearance 2.24 ft 682.0 mm
  • Ground to Top of Exhaust Stacks 17.22 ft 5248.0 mm
  • Ground to Top of Hood 13.26 ft 4043.0 mm
  • Ground to Top of ROPS 18.63 ft 5678.0 mm
  • Maximum Overall Height - Bucket Raised 33.08 ft 10109.0 mm
  • Maximum Overall Length 52.81 ft 16095.0 mm
  • Rack Back Angle - Carry 52.5 degrees 52.5 degrees
  • Rack Back Angle - Ground Level 42.8 degrees 42.8 degrees
  • Rack Back Angle - Maximum Lift 65 degrees 65 degrees
  • Reach - Maximum Lift 6.86 ft 2092.0 mm
  • Rear Axle - Centerline to Bumper 13.76 ft 4195.0 mm
  • Tread Width 10.83 ft 3302.0 mm
  • Wheel Base 19.32 ft 5890.0 mm

Dimensions - Standard Lift - Approximate

  • B-Pin Height - Maximum Lift 22.73 ft 6927.0 mm
  • Clearance at 50° Dump (Tooth Tip) 14.7 ft 4480.0 mm
  • Dump Angle at Maximum Lift 50 degrees 50 degrees
  • Ground to Bumper Clearance 3.86 ft 1176.0 mm
  • Ground to Center of Axles 4.44 ft 1352.0 mm
  • Ground to Lower Hitch Clearance 2.24 ft 682.0 mm
  • Ground to Top of Exhaust Stacks 17.22 ft 5248.0 mm
  • Ground to Top of Hood 13.26 ft 4043.0 mm
  • Ground to Top of ROPS 18.63 ft 5678.0 mm
  • Maximum Overall Height - Bucket Raised 30.5 ft 9313.0 mm
  • Maximum Overall Length 52.0 ft 15736.0 mm
  • Rack Back Angle - Carry 52.7 degrees 52.7 degrees
  • Rack Back Angle - Ground Level 43.4 degrees 43.4 degrees
  • Rack Back Angle - Maximum Lift 65 degrees 65 degrees
  • Reach - Maximum Lift 6.95 ft 2118.0 mm
  • Rear Axle - Centerline to Bumper 13.76 ft 4195.0 mm
  • Tread Width 10.83 ft 3302.0 mm
  • Wheel Base 19.32 ft 5890.0 mm

Structures

Power Train

Hydraulics

Operator Station

Technology Solutions

Cat® MineStar System

Safety

Serviceability

Customer Support

Sustainability

Buckets and Ground Engaging Tools

System Match Efficiency

News & Events

View the latest company and product news, events and customer stories.

Promotions

View the latest offers available on a range of Cat® equipment and genuine parts.

Social Media

Connect with us to learn more about our company, products, services and customers.

Branch Locations

With branches across the UK & Ireland, you can be sure that we’re never far away.

Services

Effectively manage your equipment to reduce operating costs and improve efficiency.

Technology

Integrated technology can help you understand your equipment's output and help extend its lifespan.

Finance

Quick and easy financing with customised payment plans through Cat Financial.

Please share your feedback on Finning.com!

Close window

We are committed to providing you with the best site experience possible.  Please take our brief survey to tell us how we are doing.

Thank you in advance for your time!