Menu

623K

623K Standard Equipment

POWER TRAIN - TRACTOR

  • Cat C13 ACERT engine with MEUI™
  • Cat engine brake
  • Electric start, 24 Volt
  • Air cleaner, dry type with precleaner
  • Fan, hydraulic
  • Ground level engine shutdown
  • Radiator, aluminum unit core, 9 fins per inch
  • Guard, crankcase
  • Muffler (only for less or non-regulated regions engine arrangement only)
  • Starting aid, ether
  • Braking system: - Primary and secondary, wet disc, hydraulic - Parking, hydraulic-released, spring-applied - Throttle lock
  • Transmission: - 8-speed planetary power shift - ECPC control - APECS software - Programmable top gear selection - Transmission hold - Differential lock - Guard, power train - Standard tire spin reduction - Ground speed control - Machine speed limit - Differential lock protection

POWER TRAIN - SCRAPER

  • Braking system: - Primary and secondary, wet disc, hydraulic

ELECTRICAL - TRACTOR

  • Alternator, 150 Amp
  • Batteries (4), 12V, 1,000 CCA, maintenance free, high output
  • Electrical system, 24V
  • Lighting system: - Headlights, halogen - Turn signals with hazard function, LED floodlights, (2) cutting edge (1) bowl, halogen side vision (2)
  • Starting/charging receptacle

ELECTRICAL - SCRAPER

  • Alarm, backup
  • Lighting system: - Brake lights, LED - Turn signals with hazard function, LED

OPERATOR ENVIRONMENT - TRACTOR

  • HVAC system, heat, AC, defrost
  • Thermostat control of HVAC system
  • Coat hook
  • Lunchbox platform with holding strap
  • Diagnostic connection (2)
  • 12V power ports (2)
  • Differential lock (1)
  • Dome courtesy light
  • Horn, electric
  • T-Handle implement control
  • Mirror, rearview
  • Radio ready
  • ROPS/FOPS cab, pressurized
  • Keypad switches: - Throttle lock - Wipers/washers - Hazard lights - Retarding level select - Work lights on, off - Information mode on Messenger Display
  • Safety tab rocker switches: - Regeneration control (Tier 4 Final/EU Stage IV only) - Parking brake
  • Seat belt, static two-piece
  • Seat, Cat Advanced Ride Management (ARM), Cat Comfort Series 3, rotates 30 degrees
  • Steering wheel, tilt, telescoping, padded
  • Windows, right side emergency egress
  • Windows, sliding
  • Windows, laminated, zipped in
  • Windshield wipers, front and rear windows, includes washers
  • Door lock
  • Messenger Display
  • Gauges, warnings include: - Coolant temperature - Engine oil temperature - Hydraulic oil temperature - DPF temperature - Fuel level - Park brake - Implement lockout - Brake system - Regeneration required - Throttle lock - System voltage - Secondary steering - Bail down - Ejector auto - Differential lock - Apron float - Transmission hold - Cushion hitch - High beam lights - Action lamp - Engine speed, rpm - Gear selection - DEF fill levels

FLUIDS

  • Extended Life Coolant to -37° C (-34° F)

OTHER STANDARD EQUIPMENT - TRACTOR

  • Advanced cushion hitch
  • Accumulators (cushion hitch) with Canadian Registration Number (CRN)
  • Fast oil change
  • Fenders, non-metallic
  • Heater, engine coolant 120V
  • Rims (2)
  • Tow pin, front
  • Vandalism locks
  • Heater, engine coolant 120V

OTHER STANDARD EQUIPMENT - SCRAPER

  • Bowl: - 17.6 m3 (23 yd3), heaped - 13.5 m3 (17.6 yd3), struck
  • Vandalism locks
  • Elevator with 15 flights
  • Hydraulic position sensing cylinders (bowl lift and apron)

623K Optional Equipment

STEERING ARRANGEMENTS

  • Secondary Steering Arrangement

INTEGRATED TECHNOLOGIES

  • Sequence Assist Arrangement
  • Load Assist
  • Cat Grade Control with Load Assist

OTHER ATTACHMENTS

  • Camera arrangement - WAVS
  • Steering lock - external
  • Cab beacon
  • Air horn
  • Air horn and beacon
  • Fender, scraper
  • Wiring group
  • Year of manufacture plate

WORK LIGHT ATTACHMENTS

  • HID work lights

AMBIENT CAPABILITY ARRANGEMENTS

  • Cooling, high ambient HRC
  • Cooling, low ambient HRC
  • Cooling, high ambient LRC
  • Cooling, low ambient LRC

SERVICE INSTRUCTIONS

  • Film arrangement - U.S. (ANSI)
  • Film arrangement - International (ISO)

Select Units

Overview

Quick loading, high travel speeds and the ability to load and dump on the run yield fast cycle times, allowing Cat Wheel Tractor-Scrapers to consistently deliver high productivity at the lowest cost per ton.

General

  • 180° Curb-to-Curb Turning Width 38.71 ft 11.8 m
  • Elevator Flight Spacing 20.0 in 520.0 mm
  • Fuel Tank Refill Capacity - Scraper 201.0 gal (US) 763.0 l
  • Maximum Depth of Cut 10.3 in 262.0 mm
  • Maximum Depth of Spread 18.3 in 465.0 mm
  • Maximum Floor Opening 4.4 ft 1.34 m
  • Number of Flights 15 15
  • Operating Weight - Empty 88061.0 lb 39937.0 kg
  • Overall Length 45.18 ft 13.77 m
  • Overall Shipping Height 12.37 ft 3.77 m
  • Overall Width 11.71 ft 3.57 m
  • Rated Load 25 038 kg (55,200 lb); 25.1 tonnes (27.6 tons) 25 038 kg (55,200 lb); 25.1 tonnes (27.6 tons)
  • Scraper Capacity - Heaped 23.0 yd³ 17.6 m³
  • Scraper Capacity - Struck 18.8 yd³ 14.4 m³
  • Tires - Scraper 33.25R29**E3 33.25R29**E3
  • Tires - Tractor Drive 33.25R29**E3 33.25R29**E3
  • Top Speed - Loaded 33.5 mile/h 53.9 km/h
  • Width - Cut 10.3 ft 3.14 m

Engine

  • Flywheel Power - Tractor/Scraper 304 kW (407 hp) 304 kW (407 hp)
  • Engine Model Cat C13 ACERT™ Cat C13 ACERT™
  • Flywheel Power - Tractor 407.0 HP 304.0 kW
  • Note Cat C13 ACERT engine meets U.S. Environmental Protection Agency (EPA) Tier 4 Final/EU Stage IV engine emission standards. Cat C13 ACERT engine meets U.S. Environmental Protection Agency (EPA) Tier 4 Final/EU Stage IV engine emission standards.
  • Rated Engine RPM 2000.0 r/min 2000.0 r/min

Transmission

  • Top Speed - Loaded 33.5 mile/h 53.9 km/h

Scraper Bowl

  • Scraper Capacity - Heaped 23.0 yd³ 17.6 m³

Service Refill Capacities

  • Fuel Tank 216.09 gal (US) 818.0 l
  • Crankcase 8.08 gal (US) 30.58 l
  • Cooling System 11.89 gal (US) 45.0 l
  • Diesel Exhaust Fluid 8.057 gal (US) 30.5 l
  • Hydraulic System 21.926 gal (US) 83.0 l
  • Transmission System 24.76 gal (US) 93.0 l

Dimensions

  • Height - Overall Shipping 158.9 in 4037.0 mm
  • Length - Overall Machine 542.0 in 13767.0 mm
  • Width - Overall Machine 141.1 in 3585.0 mm
  • Height - Top of Cab 142.6 in 3621.0 mm
  • Height - Scraper Blade Maximum 20.5 in 520.0 mm
  • Width - Tractor 133.1 in 3381.0 mm
  • Width - Inside of Bowl 120.0 in 3048.0 mm
  • Width - Outside Rear Tires 128.9 in 3275.0 mm
  • Front of Tractor to Front Axle 122.8 in 3119.0 mm
  • Wheel Base 329.5 in 8370.0 mm
  • Rear Axle - Rear of Machine 89.7 in 2278.0 mm
  • Ground Clearance - Tractor 21.9 in 557.0 mm
  • Axle to Vertical Hitch Pin 17.0 in 432.0 mm
  • Height - Top of Elevator 148.3 in 3768.0 mm
  • Width - Overall Machine - Ladder Down 149.2 in 3790.0 mm
  • Width - Rear Tire Centers 90.2 in 2290.0 mm

Cab

  • Exterior Sound Level The exterior sound power level for the standard machine (ISO 6393) is 111.5 dB(A). The exterior sound power level for the standard machine (ISO 6393) is 111.5 dB(A).
  • ROPS/FOPS Meets SAE and ISO standards Meets SAE and ISO standards

Safety Criteria Compliance Standards

  • Brakes ISO 3450:1996 ISO 3450:1996
  • Falling Object Protective Structure (FOPS) ISO 3449:2005 Level II ISO 3449:2005 Level II
  • Reverse Alarm ISO 9533:2010 ISO 9533:2010
  • Rollover Protection Structure (ROPS) ISO 3471:2008 for up to 17 084 kg (37,664 lb) ISO 3471:2008 for up to 17 084 kg (37,664 lb)
  • Seat Belt SAE J386:JUN1985 SAE J386:JUN1985
  • Steering System ISO 5010:2007 ISO 5010:2007

Travel Speeds - Runout

  • Transmission Gear - Eighth 33.5 mile/h 53.9 km/h
  • Transmission Gear - Fifth 13.6 mile/h 21.9 km/h
  • Transmission Gear - First 3.1 mile/h 5.0 km/h
  • Transmission Gear - Fourth 10.1 mile/h 16.3 km/h
  • Transmission Gear - Reverse 5.7 mile/h 9.2 km/h
  • Transmission Gear - Second 5.5 mile/h 8.9 km/h
  • Transmission Gear - Seventh 24.8 mile/h 39.9 km/h
  • Transmission Gear - Sixth 18.4 mile/h 29.6 km/h
  • Transmission Gear - Third 7.5 mile/h 12.1 km/h

Implement Cycle Times

  • Bowl Lower 3.5 s 3.5 s
  • Bowl Raise 3.0 s 3.0 s
  • Ejector Extend 6.45 s 6.45 s
  • Ejector Retract 9.7 s 9.7 s

• Tractor Serviceability Improvement - The filter bank located at the rear of the engine compartment has undergone improvements for serviceability by raising the filter bank up for easier access.

• Engine Over Speed Protection - In the event of an engine over speed situation, the compression brake or brakes will automatically engage with no operator input. The machine determines the over speed condition based on rate of acceleration and applies compression brakes automatically.

• Advanced Cushion Hitch - With similar technology as the Cat® Advanced Ride Management seat suspension, this software allows the cushion hitch to prevent end stroke by having the ability to predict end stroke events and manage the rate of dampening. The desired result is improved hitch repair, reduced maintenance and improved operator ride in rough conditions.

• High Pressure Steering - 620K Series steering system design requires significantly less steering effort. The reduced steering effort will allow for decreased operator fatigue and a more efficient operator resulting in possible higher rates of production late in the work cycle.

• Load Assist Option - The 623K now is offered with the Load Assist option like the 621K and 627K.

• Draft Arm Overflow Guards - The open bowls now come standard with bowl side overflow guards to help prevent material from flowing over the bowl sides and falling onto the draft arms where material becomes lodged between the bowl side and draft arm resulting in decreased work cycle times.

• Auto Stall - In cold weather conditions the machine will use the Auto Stall feature to help warm up the transmission oil faster resulting in the machine shifting out of torque converter drive (2nd gear) faster than on previous models.

• Differential Lock Engagement Protection (Standard) - This standard feature allows the machine to prevent the operator from engaging the differential lock when damage could occur.

• Cab Improved - The interior of the K Series cabs has improved the operator comfort and visibility by redesigning the dash area and key pad placement.

• Machine Speed Limit - This feature is designed to take the place of top gear selection. If the machine top speed needs to be limited the operator can select the top speed through the display or the top speed can be set in ET. This will allow the machine to find the correct gear that works best for the engine and transmission. Allowing the engine and transmission to select the correct gear to pull the load in most cases resulting in a lower engine load factor and lower fuel burn verses using top gear selection that required the machine to run at engine speeds at or close high idle.

• Ground Speed Control - Ground Speed Control sets the desired top speed by the operator if job site conditions or segment speed limits require a speed less than full run out. Machine Speed Limit is intended for use when top speed needs to be limited for longer durations and Ground Speed Control is intended for use when the top speed needs to be reduced for shorter segments or intermediate periods of time. The operator can set the desired top speed and the machine will find the correct gear that works best for the engine and transmission. Allowing the engine and transmission to select the correct gear to pull the load in most cases will result in a lower engine load factor and lower fuel burn verses top gear selection.

News & Events

View the latest company and product news, events and customer stories.

Promotions

View the latest offers available on a range of Cat® equipment and genuine parts.

Social Media

Connect with us to learn more about our company, products, services and customers.

Branch Locations

With branches across the UK & Ireland, you can be sure that we’re never far away.

Services

Effectively manage your equipment to reduce operating costs and improve efficiency.

Technology

Integrated technology can help you understand your equipment's output and help extend its lifespan.

Finance

Quick and easy financing with customised payment plans through Cat Financial.

Please share your feedback on Finning.com!

Close window

We are committed to providing you with the best site experience possible.  Please take our brief survey to tell us how we are doing.

Thank you in advance for your time!