G3516E Standard Equipment

Air Inlet

• Two-element single-stage air cleaner with enclosure and service indicator

Control Panels

• EMCP II+

Exhaust

• Dry exhaust manifolds, insulated and shielded
• Center section cooled turbocharger with Cat flanged outlet
• Individual exhaust port and turbocharger outlet wired to Integrated Temperature Sensing Module (ITSM) with GECM providing alarms and shutdowns

Cooling

• Engine driven water pumps for jacket water and after cooler
• Jacket water and SCAC thermostats
• ANSI/DN customer flange connections for JW inlet and outlet
• Cat flanges on SCAC circuit
• Engine driven water pumps for jacket water and after cooler
• Jacket water and SCAC thermostats
• ANSI/DN customer flange connections for JW inlet and outlet
• Cat flanges on SCAC circuit

Fuel system

• Electronic fuel metering valve
• Throttle plate, 24V DC actuator, controlled by GECM
• Fuel system is sized for 31.5 to 47.2 MJ/NM3 dry pipeline natural gas with pressure of 4.5 to 34.5KPa to the engine fuel control valve

Generator

• SR4B
• Caterpillar's Digital Voltage Regulator (CDVR) with 3-phase sensing and KVAR/PF control
• Reactive droop
• Bus bar connections
• Winding temperature detectors
• Anti-condensation space heater

Starting/Charging

• 24V starting motors
• Battery with cables and rack(shipped loose)
• Battery disconnect switch
• 60A, 24V charging alternator (standard on 60Hz 1800 rpm only)

General

• Paint - Caterpillar Yellow except rails and radiators gloss black
• Crankshaft vibration damper and guard
• Operation and maintenance manuals
• Parts book