Menu

3516B

3516B Standard Equipment

AIR INLET SYSTEM

  • Separate Circuit aftercooler core, corrosion resistant coated (air side) Air cleaner, regular duty Dual Turbochargers, 152 mm (6 in) OD straight connection

CONTROL SYSTEM

  • Caterpillar A-III Electronic Engine Control, with Electronic Unit Injector Fuel System Rigid Wiring Harness (10 amp DC power required to drive Electronic Engine Control Module)

COOLING SYSTEM

  • Oil cooler Thermostats and housing, full open temperature 92 C (198 F) Jacket water pump, gear driven, centrifugal Auxiliary fresh water pump Expansion tank Auxiliary sea water pump, centrifugal, non-self-priming

EXHAUST SYSTEM

  • Dry gas tight exhaust manifolds with heat shields Dual Turbochargers with watercooled bearings and heat shields Exhaust outlet, vertical, 305 mm (12 in) round flanged outlet on engines @ 1500 or 1800 rpm Exhaust outlet, vertical, 203 mm (8 in) round flang

FLYWHEELS & FLYWHEEL HOUSINGS

  • Flywheel, SAE No. 00, 183 teeth Flywheel housing, SAE No. 00

FUEL SYSTEM

  • Fuel filter, RH, with service indicators
  • Fuel transfer pump
  • Electronically Controlled Unit Injectors

INSTRUMENTATION

  • Overspeed shutdown notification light
  • Emergency stop notification light
  • Prelube override
  • Shutdown override
  • Graphical Unit (Marine Power Display) for analog or digital display of:
  • Engine oil pressure, Engine water temperature, Fuel pressure System, DC voltage, Air inlet restriction, RH & LH exhaust temperature, Fuel filter differential, Oil filter differential, Service meter, Engine speed, Instantaneous Fuel Consumption, Total Fuel

LUBE SYSTEM

  • Crankcase breather, Top mounted Oil filter, RH Oil filler and dipstick, RH Deep sump oil pan Oil pump, gear type

MOUNTING SYSTEM

  • Rails, engine mounting, engine length, industrial type, 254 mm (10 in), C-channel

POWER TAKE-OFFS

  • Accessory drive Lower RH, Lower LH Front housing, Two-sided

PROTECTION SYSTEM

  • A-III Electronic Monitoring System provides customer programmable engine de-ration strategies to protect against adverse operating conditions
  • Emergency stop push button (located in Electronic Instrument Panel) Safety shutoff protection:

GENERAL

  • Vibration damper and guard Paint, Caterpillar Yellow engine with black rails. Lifting eyes
  • NOTE: 1. Engines for heat exchanger cooling do NOT include heat exchanger. 2. When used with competitive generator, a TVA is recommended. An alternative vibration damper may be required. 3. Engine is wired for auto start stop.

3516B Optional Equipment

AIR INLET SYSTEM

  • Air Cleaner Removal
  • Remote Air Inlet Adapters

CHARGING SYSTEM

  • Battery Chargers
  • Charging Alternators

CONTROL SYSTEM

  • Load Sharing module
  • Local speed throttle control

COOLING SYSTEM

  • Water level switch gauge
  • Coolant level sensors
  • Connections
  • Keel Cooling Conversions
  • Radiator cooling conversion
  • Heat exchangers
  • Auxiliary water pumps
  • Sea water pump removal
  • Air separator

EXHAUST SYSTEM

  • Exhaust outlet
  • Flexible fittings
  • Elbows
  • Flanges
  • Flange and exhaust expanders
  • Mufflers

FUEL SYSTEM

  • Fuel Cooler
  • Fuel priming pumps
  • Flexible fuel lines
  • Rigid Fuel Lines
  • Primary fuel filter
  • Fuel level switch

GENERATORS AND GENERATOR ATTACHMENTS

  • Low voltage connection
  • Generator conversion
  • RFI filter
  • Bearing temperature detectors (RTD
  • Manual voltage control
  • Air filter

INSTRUMENTATION

  • PL1000T Communication Module
  • PL1000E Communication Module
  • Customer Interface Box
  • Thermocouples
  • Remote panel display
  • Remote cylinder temperature display

LUBE SYSTEM

  • Oil Pan
  • Oil pan accessories
  • Sump pumps
  • Prelubrication Options
  • Lubricating oil
  • Centrifugal Oil Filter

MOUNTING SYSTEM

  • Vibration isolators
  • Rails

POWER TAKE-OFFS

  • Flywheel guard
  • Flexible coupling
  • Coupling hub
  • Front housing accessories
  • Upper left hand front location
  • Upper left hand rear location
  • Upper right hand front location:
  • Upper right hand rear location
  • Lower left hand front location
  • Front housing accessory drives
  • Front power take-offs
  • Crankshaft pulleys
  • Damper guard removals

PROTECTION SYSTEM

  • Air inlet shutoffs
  • Switches and contactors
  • Explosion relief valve
  • Sensors

SPARE PART KITS

  • Engine Parts Kits

STARTING SYSTEM

  • Starting motors or barring divice
  • Air starting motors options
  • Starting aids
  • Battery sets - 24 volt - Dry
  • Battery rack

GENERAL

  • Tool set
  • Caterpillar datalink wire

Select Units

Overview

The 3516B Marine Generator Set incorporates a separate circuit aftercooling (SCAC) or sea water aftercooling (SWAC) system for all configurations. The primary advantage of the SCAC systsem is reduced aftercooler corrosion since no sea water circulates through the aftercooler. Many other improvements on these engines contribute to minimizing owning and operating costs. A strengthened fuel injection actuation system and rear gear train maintain reliability and durability while providing higher injection pressures. The 3516B also features thermo-laminated heat shields on all marine configurations to maintain surface temperatures below Marine Classification Society regulations.

Generator Set Specifications

  • Minimum Rating 1180 eKW (1475 kVA) 1180 eKW (1475 kVA)
  • Maximum Rating 1825 eKW (2281 kVA) 1825 eKW (2281 kVA)
  • Frequency 50 Hz or 60 Hz 50 Hz or 60 Hz
  • Speed 1000 rpm, 1200 rpm, 1500 rpm, 1800 rpm 1000 rpm, 1200 rpm, 1500 rpm, 1800 rpm

Engine Specifications

  • Configuration Vee 16, 4-Stroke-Cycle Diesel Vee 16, 4-Stroke-Cycle Diesel
  • Bore 6.7 in 170.0 mm
  • Stroke 7.5 in 190.0 mm
  • Displacement 4210.0 in³ 69.0 l

Generator Set Configurations

  • Emissions/Fuel Strategy IMO I, IMO II (1600 eKW @ 50 hz only) IMO I, IMO II (1600 eKW @ 50 hz only)

Generator Set Dimensions

  • Weight 11354 kg (25030 lb) to 13538 kg (29845 lb) 11354 kg (25030 lb) to 13538 kg (29845 lb)
  • Length 5076 mm (199.8 in) to 5611 mm (220.9 in) 5076 mm (199.8 in) to 5611 mm (220.9 in)
  • Width 1703 mm (67.1 in) to 2144 mm (84.4 in) 1703 mm (67.1 in) to 2144 mm (84.4 in)
  • Height 2053 mm (80.8 in) to 2100 mm (82.7 in) 2053 mm (80.8 in) to 2100 mm (82.7 in)

Improved fuel economy

Reduced visible and gaseous emissions

Enhanced diagnostic and monitoring capabilities

Increased rated output with no reduction in reliability

News & Events

View the latest company and product news, events and customer stories.

Promotions

View the latest offers available on a range of Cat® equipment and genuine parts.

Social Media

Connect with us to learn more about our company, products, services and customers.

Branch Locations

With branches across the UK & Ireland, you can be sure that we’re never far away.

Services

Effectively manage your equipment to reduce operating costs and improve efficiency.

Technology

Integrated technology can help you understand your equipment's output and help extend its lifespan.

Finance

Quick and easy financing with customised payment plans through Cat Financial.

Please share your feedback on Finning.com!

Close window

We are committed to providing you with the best site experience possible.  Please take our brief survey to tell us how we are doing.

Thank you in advance for your time!