Menu

816F Series 2

Select Units

Overview

An extremely versatile machine, the 816F2 is built with uncompromising quality for operating in harsh landfill conditions.

Engine

  • Gross Power 253.0 HP 189.0 kW
  • Net Power 232.0 HP 173.0 kW
  • Engine Model Cat® C9 ACERT™ Cat® C9 ACERT™
  • Net Power ISO 3046-2 232.0 HP 173.0 kW
  • Net Power - ISO 9249 235.0 HP 175.0 kW
  • SAE J1349 232.0 HP 173.0 kW
  • EEC 80/1269 235.0 HP 175.0 kW
  • Torque Rise 19.0 % 19.0 %
  • Bore 4.4 in 112.0 mm
  • Stroke 5.9 in 149.0 mm
  • Displacement 537.0 in³ 8.8 l

Transmission

  • Forward - 1 3.5 mile/h 5.6 km/h
  • Forward - 2 5.9 mile/h 9.5 km/h
  • Reverse - 1 4.0 mile/h 6.3 km/h
  • Reverse - 2 6.6 mile/h 10.6 km/h

Hydraulic System

  • Vane Pump Output at 2015 rpm and 6900 kPa (1000 psi) 29.6 gal/min 112.0 l/min
  • Relief Valve Setting 2248.0 psi 15500.0 kPa
  • Lift Cylinder Bore x Stroke 120.65 mm x 913.9 mm 4.75 in x 36 in 120.65 mm x 913.9 mm 4.75 in x 36 in

Axles

  • Front Fixed Fixed
  • Oscillating Rear ±8° ±8°

Brakes

  • Standards Meet OSHA regulations Meet OSHA regulations

Wheels - Plus Tip Teeth with Abrasion Resistant Material (ARM)

  • Drum Diameter 4.25 ft 1300.0 mm
  • Drum Width 3.33 ft 1016.0 mm
  • Tips per Wheel 20 20

Wheels - Chevron-Pattern, Chopper Blades

  • Blades per Wheel 20 20
  • Drum Diameter 4.25 ft 1300.0 mm
  • Drum Width 3.33 ft 1016.0 mm

Straight Blade

  • Width - Over End Bits 11.9 ft 3657.0 mm
  • Moldboard - Length 11.67 ft 3556.0 mm
  • Height 6.27 ft 1914.0 mm

Service Refill Capacities

  • Fuel Tank 117.8 gal (US) 446.0 l
  • Cooling System 14.5 gal (US) 55.0 l
  • Crankcase 9.0 gal (US) 34.0 l
  • Transmission 13.2 gal (US) 50.0 l
  • Differential - Final Drives - Front 11.4 gal (US) 43.0 l
  • Differential - Final Drives - Rear 11.4 gal (US) 43.0 l
  • Hydraulic System - Including Tank 36.2 gal (US) 137.0 l
  • Hydraulic Tank 23.2 gal (US) 88.0 l

Weights

  • Operating Weight 52364.0 lb 23748.0 kg

Cab

  • ROPS/FOPS Meet SAE and ISO standards Meet SAE and ISO standards

Sound Performance

  • Standards Meet required sound standards Meet required sound standards

Operating Specifications

  • Ground Clearance 1.5 ft 456.0 mm

Dimensions (Approximate)

  • Height - Top of Cab with A/C 12.75 ft 3801.0 mm
  • Height - Top of Exhaust Pipe 11.36 ft 3462.0 mm
  • Height - Top of Hood 8.16 ft 2489.0 mm
  • Ground Clearance - Bumper 2.64 ft 804.0 mm
  • Ground Clearance - Striker Bars 2.13 ft 650.0 mm
  • Centerline of Rear Axle to Edge of Bumper 6.22 ft 1896.0 mm
  • Centerline of Rear Axle to Hitch 5.5 ft 1675.0 mm
  • Wheel Base 10.9 ft 3350.0 mm
  • Length - With Blade on Ground 25.76 ft 7854.0 mm
  • Width - Over Wheels 10.95 ft 3338.0 mm
  • Width - Over End Bits - Blade 11.99 ft 3657.0 mm
  • Turning Radius - Outside End Bits 21.21 ft 6464.0 mm
  • Blade Width - Straight 11.67 ft 3556.0 mm
  • Drum Width 3.33 ft 1016.0 mm
  • Ground Clearance 1.49 ft 456.0 mm

Trash Protection and Cooling System

Tips and Wheels

Power Train

Landfill Blades

Operator's Station

Serviceability

Complete Customer Support

816F Series 2 Standard Equipment

ELECTRICAL

  • Alarm, backup
  • Alternator (80 amp)
  • Batteries, maintenance-free (2)
  • Diagnostic connectors
  • Lighting system, halogen (front, rear and cab-mounted)
  • Starting and charging system (24-volt)
  • Starting receptacle for emergency starts

GUARDS

  • Axle (front and rear)
  • Drive shaft
  • Hinged crankcase
  • Hydraulic tank
  • Power train
  • Steering cylinder

OPERATOR ENVIRONMENT

  • Air conditioner, roof-mounted
  • Blade control system locks
  • Cab, pressurized and sound suppressed (ROPS/FOPS)
  • Coat hook
  • Cigar lighter and ashtray
  • Caterpillar Monitoring System
  • Dome light (cab)
  • Fuses, blade style (in-cab)
  • Heater and defroster
  • Horn, electric (steering wheel mounted)
  • Hydraulic steering
  • Lunchbox and beverage holders
  • Mirrors, rearview (internally-mounted)
  • Seat, KAB mechanical suspension
  • Seat belt, retractable, 76 mm (3 in) wide
  • Wet-arm wipers/washers (front and rear)

POWER TRAIN

  • Brakes, fully hydraulic, enclosed, wet-disc
  • Engine, Cat® C9 ACERT™
  • Engine cooling fan (suction)
  • Fuel priming pump (electric)
  • Muffler
  • Radiator, Next Generation Modular (NGMR)
  • Starting aid (ether)
  • Torque converter
  • Transmission, planetary (2 forward/2 reverse speeds)

OTHER STANDARD EQUIPMENT

  • Cat O-ring face seals/couplings
  • XT™ hoses
  • Coolers
  • Hitch, drawbar with pin
  • Hood, metallic with lockable service doors
  • Hydraulic oil cooler
  • Oil sampling valves
  • Striker bars (all wheels)
  • Vandalism protection caplocks
  • Wheels (1016 mm/40 in) with weld-on Plus Tips with extended inner rim

BULLDOZER

  • Bulldozer blade, hydraulics and linkage are not included in standard equipment

ANTIFREEZE

  • Premixed 50 percent concentration of Extended Life Coolant with freeze protection to -34° C (-29° F)

News & Events

View the latest company and product news, events and customer stories.

Promotions

View the latest offers available on a range of Cat® equipment and genuine parts.

Social Media

Connect with us to learn more about our company, products, services and customers.

Branch Locations

With branches across the UK & Ireland, you can be sure that we’re never far away.

Services

Effectively manage your equipment to reduce operating costs and improve efficiency.

Technology

Integrated technology can help you understand your equipment's output and help extend its lifespan.

Finance

Quick and easy financing with customised payment plans through Cat Financial.

Please share your feedback on Finning.com!

Close window

We are committed to providing you with the best site experience possible.  Please take our brief survey to tell us how we are doing.

Thank you in advance for your time!