Menu

313F

High Performance

        
  • The Cat C4.4 engine can run on biodiesel up to B20 and meets U.S. EPA Tier 4 Final and EU Stage IV emission standards with an aftertreatment system that requires no maintenance or downtime.
  •     
  • Two power modes – eco and high power – help you manage fuel for the work you need to do.
  •     
  • Reduce engine speed and minimize fuel consumption during no-load or light-load conditions with automatic engine speed control (AEC).
  •     
  • Engine idle shutdown allows you to set intervals so you don’t waste fuel; it also helps reduce emissions and wear and tear on your excavator.
  •     
  • Work at altitudes up to 2300 m (7,545 ft) above sea level without de-rating.
  •     
  • Get the job done with a powerful and efficient hydraulic system. Major components are located close together creating less friction, reducing pressure drops, and increasing power to the ground.
  •     
  • Save energy and improve fuel efficiency with boom and stick oil regeneration. This feature improves controllability, increases productivity, and reduces operating costs.
  •     
  • Don’t let the temperature stop you from working. The excavator has a standard ambient temperature capability of 52° C (125° F). Standard cold start capability is –18° C (0° F) and an optional cold start package of –25° C (–13° F) is also available.
         

Reduced Maintenance Costs

        
  • Spend more time working and less time greasing. Front linkage greasing intervals are 500 hours.
  •     
  • Check and service your machine faster with many ground-level routine service and maintenance points. Grouped filters and wide service doors allow easy access to the radiator, pump, air cleaner, and engine compartments.
  •     
  • Change your oil without the use of tools with the incorporated engine oil drain valve.
  •     
  • Three levels of fuel filtration protect the engine from dirty fuel.
  •     
  • Blowing out debris is easy with wide clearance between the radiator, oil cooler, and air conditioning condenser.
  •     
  • Extract fluid samples for analysis quickly and easily with S·O·SSM ports.
         

Reliability and Durability You Can Count On

        
  • Count on your machine to withstand wear throughout the years. Boom, sticks, and other high-stress areas are reinforced with thick multi-plate fabrications, castings, and forgings to ensure quality and reliability.
  •     
  • Self-lubricating bearings extend service intervals and increase the machine’s uptime.
  •     
  • Elongated bolts secure the large swing bearing to help handle the most swing-intensive work
  •     
  • Protect your moving parts with the Grease Lubricated Track (GLT) undercarriage. Keep water, dust, and debris out and grease sealed in while prolonging wear life and reducing travel noise.
  •     
  • Robust bottom guards protect machine components that may be damaged while swinging.
  •     
  • Hydraulic snubbers on the boom and stick cylinders reduce end-of-stroke impact prolonging the machine life.
  •     
  • Maintain track alignment and improve overall performance while traveling or working on slopes with an idler guard and bolt-on center guard.
  •     
  • The upper frame uses specially designed mountings to support the heavy-duty cab and the lower frame is reinforced to enhance component durability.
  •     
  • You are supported. The Cat Dealer Network is there to provide assistance when you need it.

Boost Efficiency and Productivity with Integrated Cat Connect Technologies

        
  • Product Link™ collects data automatically and accurately from your assets – any type and any brand. Information such as location, hours, fuel usage, productivity, idle time, maintenance alerts, diagnostic codes, and machine health can be viewed online through web and mobile applications.
  •     
  • Boost productivity with optional Cat GRADE Control 2D Depth and Slope. Receive real-time bucket tip elevation guidance for flat and sloping planes.
  •     
  • Upgrade to optional Cat GRADE Control – Depth and Slope, 3D capability which provides vertical and horizontal positioning at the bucket tip. The 3D design plan indicates precisely where to work and how much to cut or fill.

Unmatched Comfort

        
  • Work comfortably in the spacious, quiet cab with automatic climate control; an adjustable heated seat increases comfort and reduces operator fatigue.
  •     
  • Control the excavator comfortably with easy to access controls and switches.
  •     
  • Adjust the joystick consoles and armrests to a comfortable position.
  •     
  • Navigate quickly on the standard LCD monitor which is programmable in 42 languages.
  •     
  • Stow your gear with plenty of in-cab storage to the front and rear of the right-side console and behind the seat. A cup holder, document holder, and coat hook are also provided.
  •     
  • Keep your personal devices conveniently charged using the two standard 12V power ports. Each provide up to 10A of power.
        .

Safety

        
  • Rollover Protection Structure (ROPS)-certified cab provides a safe work environment.
  •     
  • Enter and exit the cab and walk on the upper structure safely with handrails and anti-skid plating which are meant to reduce slipping and tripping.
  •     
  • Increase visibility with a standard rearview camera and mirrors. The camera is integrated into the counterweight to protect against damage.
  •     
  • Stay safe in an emergency situation. The skylight and 70/30 front window function as emergency exits.
  •     
  • The hydraulic activation lever lock cuts the pilot pressure for the control levers, preventing the operator from starting the engine when in a locked position.
  •     
  • Shut the engine down quickly and easily in the event of an emergency with a secondary engine shutoff switch.
  •     
  • Protect yourself from overhead impact with the optional Falling Objects Guarding System (FOGS) and other attachments available from your Cat dealer.
         

Versatile Solution to Meet Your Needs

        
  • Transition quickly between attachments with optional auxiliary hydraulics.
  •     
  • Expand your work capabilities with attachments for a variety of applications including breaking rock in quarries, preparing trenches, demolition work, and moving and handling material.
  •     
  • Cat dealers can install hydraulic kits to properly operate attachments, maximizing machine uptime and profits.

Select Units

Overview

The Cat® 313F excavator is a reliable and versatile solution for your light to medium duty applications. Featuring a fuel-efficient Cat C4.4 engine, robust frames and components, and a state-of-the-art hydraulic system, the 313F allows you to move material all day with speed and precision.

Engine

  • Engine Model C4.4 C4.4
  • Net Flywheel Power 92.0 HP 69.0 kW
  • Gross Power - SAE J1995 74 kW (100 hp/101 PS) 74 kW (100 hp/101 PS)
  • Net Power - SAE J1349 69 kW (92 hp/93 PS) 69 kW (92 hp/93 PS)
  • Bore 4.13 in 105.0 mm
  • Stroke 5.0 in 127.0 mm
  • Displacement 269.0 4.4 l

Hydraulic System

  • Main System - Maximum Flow - Total 67.0 gal/min 256.0 l/min
  • Maximum Pressure - Equipment 4424.0 psi 30500.0 kPa
  • Maximum Pressure - Travel 5076.0 psi 35000.0 kPa
  • Maximum Pressure - Swing 3626.0 psi 25000.0 kPa
  • Pilot System - Maximum Flow 5.8 gal/min 22.0 l/min
  • Pilot System - Maximum Pressure 598.0 psi 4120.0 kPa

Machine Weight

  • Operating Weight 33080.0 lb 15000.0 kg
  • Minimum Operating Weight 29770.0 lb 13500.0 kg
  • Maximum Operating Weight 33080.0 lb 15000.0 kg

Service Refill Capacities

  • Fuel Tank Capacity 66.0 gal (US) 250.0 l
  • DEF Tank Capacity 5.2 gal (US) 19.6 l
  • Cooling System 2.9 gal (US) 11.0 l
  • Engine Oil - With Filter 3.6 gal (US) 13.5 l
  • Swing Drive 0.6 gal (US) 2.4 l
  • Final Drive - Each 0.8 gal (US) 3.0 l
  • Hydraulic System Oil - Including Tank 27.2 gal (US) 103.0 l
  • Hydraulic Tank Oil 23.9 gal (US) 90.6 l

Air Conditioning System

  • Air Conditioning The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.9 kg of refrigerant which has a CO2 equivalent of 1.287 metric tonnes. The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.9 kg of refrigerant which has a CO2 equivalent of 1.287 metric tonnes.

Working Ranges

  • Boom Reach Boom 4.65 m (15'3") Reach Boom 4.65 m (15'3")
  • Stick R3.0 m (9'10") R3.0 m (9'10")
  • Bucket GD 0.53 m3 (0.69 yd3 GD 0.53 m3 (0.69 yd3
  • Maximum Digging Depth 19.8 ft 6040.0 mm
  • Maximum Reach at Ground Level 27.0 ft 8230.0 mm
  • Maximum Cutting Height 28.6 ft 8720.0 mm
  • Maximum Loading Height 20.8 ft 6330.0 mm
  • Minimum Loading Height 5.0 ft 1530.0 mm
  • Maximum Depth Cut for 2440 mm (8”0’) Level Bottom 19.3 ft 5860.0 mm
  • Maximum Vertical Wall Digging Depth 17.2 ft 5250.0 mm
  • Bucket Digging Force (SAE) 19200.0 lbf 85.0 kN
  • Stick Digging Force (SAE) 12800.0 lbf 57.0 kN
  • Bucket Digging Force (ISO) 21400.0 lbf 95.0 kN
  • Stick Digging Force (ISO) 13100.0 kN 58.0 lbf

Dimensions

  • Boom Reach Boom 4.65 m (15'3") Reach Boom 4.65 m (15'3")
  • Stick R3.0 m (9'10") R3.0 m (9'10")
  • Bucket GD .53 m3 (.69 yd3) GD .53 m3 (.69 yd3)
  • Shipping Height 9.3 ft 2820.0 mm
  • Shipping Length 25.2 ft 7670.0 mm
  • Tail Swing Radius 7.1 ft 2160.0 mm
  • Track Length 12.3 ft 3750.0 mm
  • Ground Clearance 1.4 ft 440.0 mm
  • Track Gauge 6.5 ft 1990.0 mm
  • Transport Width - 700 mm (28") Shoes 8.8 ft 2690.0 mm
  • Cab Height 9.1 ft 2770.0 mm
  • Cab Height with Top Guard 9.9 ft 2970.0 mm
  • Counterweight Clearance 2.9 ft 890.0 mm
  • Length - Center of Rollers 10.0 ft 3040.0 mm

313F Standard Equipment

CAB

  • ROPS, standard sound suppression
  • Adjustable seat, armrest, and console
  • 177 mm (7 in) color LCD monitor
  • Automatic climate control
  • AM/FM radio
  • Travel control pedals with removable hand levers

CAT CONNECT TECHNOLOGY

  • Cat Product Link

ELECTRICAL SYSTEM

  • Two 12V, 10A power supplies
  • Left-side boom light with delay
  • Cab light with time delay

ENGINE

  • C4.4 Tier 4 Final, Stage IV diesel engine
  • Biodiesel capable up to B20
  • 2300 m (7,500 ft) altitude capability
  • Automatic engine speed control
  • Side-by-side cooling system
  • 18°C (0°F) cold start capability
  • Block heater capability
  • Engine idle shutdown function

HYDRAULIC SYSTEM

  • Boom and stick regeneration circuit
  • Automatic swing brake
  • High-performance hydraulic return filter

SERVICE AND MAINTENANCE

  • S·O·SSM sampling port for coolant sampling port for engine and hydraulic oil.

SAFETY AND SECURITY

  • One key security system
  • Door and cap locks
  • Lockable external tool/storage box
  • Signaling/warning horn
  • Secondary engine shutoff switch
  • Emergency boom down
  • Openable skylight as emergency exit
  • Rearview camera
  • Mirrors, rearview (frame -right, cab - left) 

UNDERCARRIAGE AND STRUCTURES

  • 2.2 mt (4,850 lb) counterweight
  • Towing eye on base frame
  • Grease Lubricated Track GLT1, resin seal

313F Optional Equipment

BOOM AND STICK

  • 4.65 m (15'3") reach boom
  • Variable angle boom
  • R3.0 m (9'10") stick
  • R2.8 m (9'2") stick
  • R2.5 m (8'2") stick
  • R2.1 m (6'11") stick

CAT CONNECT TECHNOLOGY

  • Cat GRADE Control 2D Depth and Slope
  • Cat AccuGrade™

ELECTRICAL SYSTEM

  • Right-side boom light

ENGINE

  • Electric priming pump
  • -25° C (-13° F) cold start capability

HYDRAULIC SYSTEM

  • Fine swing control
  • Auxiliary hydraulics
  • Quick coupler line
  • Boom lowering control valve
  • Stick lowering check valve
  • Two way control pattern quick-changer
  • Medium-pressure line
  • High-pressure line

SAFETY AND SECURITY

  • Bolt-on FOGS

UNDERCARRIAGE AND STRUCTURES

  • 500 mm (20") triple grouser shoes
  • 600 mm (24") triple grouser shoes
  • 700 mm (28") triple grouser shoes
  • Rubber pad for 500 mm (20") triple grouser shoes
  • Center track guiding guard
  • Segmented two-piece track guiding guard
  • 2500 mm (8'2") blade with replaceable cutting edge with lever control
  • 2600 mm (8'6") blade with replaceable cutting edge with lever control
  • 2700 mm (8'10") blade with replaceable cutting edge with lever control

News & Events

View the latest company and product news, events and customer stories.

Promotions

View the latest offers available on a range of Cat® equipment and genuine parts.

Social Media

Connect with us to learn more about our company, products, services and customers.

Branch Locations

With branches across the UK & Ireland, you can be sure that we’re never far away.

Services

Effectively manage your equipment to reduce operating costs and improve efficiency.

Technology

Integrated technology can help you understand your equipment's output and help extend its lifespan.

Finance

Quick and easy financing with customised payment plans through Cat Financial.

Please share your feedback on Finning.com!

Close window

We are committed to providing you with the best site experience possible.  Please take our brief survey to tell us how we are doing.

Thank you in advance for your time!