Menu

14M3

Select Units

Overview

Cat® Motor Graders continue the Caterpillar tradition of being the industry standard in heavy construction, road building, and governmental applications. The 14M3 features a host of integrated technology solutions that increase operator efficiency, boost productivity levels and lower owning and operating costs. The 14M3 takes advantage of a larger engine, increased fuel efficiency, improved machine balance, enhanced transmission performance, more powerful telematics and added operator safety/convenience features.

Engine

  • Base Power (1st Gear) - Net 238.0 HP 178.0 kW
  • Engine Model Cat C13 ACERT VHP Cat C13 ACERT VHP
  • Bore 5.1 in 130.0 mm
  • Stroke 6.2 in 157.0 mm
  • Speed at Rated Power 1,850 rpm 1,850 rpm
  • Emissions Tier 4 Final/Stage IV, Tier 3/Stage IIIA equivalent or Tier 2/Stage II equivalent Tier 4 Final/Stage IV, Tier 3/Stage IIIA equivalent or Tier 2/Stage II equivalent
  • Maximum Altitude - Full Power 13900.0 ft 4237.0 m
  • Maximum Altitude - Full Power (Tier 2) 12049.0 ft 3672.0 m
  • Maximum Altitude - Full Power (Tier 3) 14349.0 ft 4374.0 m
  • Maximum Torque - VHP Plus 1137.0 lb/ft 1542.0 N·m
  • Note (1) Net power is tested per ISO 9249, SAE J1349, and EEC 80/1269 Standards in effect at the time of manufacture. Net power is tested per ISO 9249, SAE J1349, and EEC 80/1269 Standards in effect at the time of manufacture.
  • Note (2) Optimized VHP Plus is standard for the 14M3. Optimized VHP Plus is standard for the 14M3.
  • Note (3) Net power advertised is the power available at rated speed of 1,850 rpm, measured at the flywheel when engine is equipped with fan, air cleaner, muffler and alternator. Net power advertised is the power available at rated speed of 1,850 rpm, measured at the flywheel when engine is equipped with fan, air cleaner, muffler and alternator.
  • Note (4) Power as declared per ISO 14396 – Rated rpm 1,850 – VHP+ = 228 kW (306 hp) Power as declared per ISO 14396 – Rated rpm 1,850 – VHP+ = 228 kW (306 hp)
  • Standard - Fan Speed - Minimum 550 rpm 550 rpm
  • Standard Capability 122.0 °F 50.0 °C
  • Torque Rise 41% 41%
  • Note (5) Cat engines equipped with a Selective Catalytic Reduction (SCR) system are required to use: – Diesel Exhaust Fluid (DEF) which meets the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1. Cat engines equipped with a Selective Catalytic Reduction (SCR) system are required to use: – Diesel Exhaust Fluid (DEF) which meets the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1.
  • Standard - Fan Speed - Maximum 1,600 rpm 1,600 rpm
  • Displacement 763.0 in³ 12.5 l
  • Number of Cylinders 6 6

Frame

  • Circle - Outer Diameter 71.7 in 1822.0 mm
  • Front Axle - Total Oscillation per Side 32° 32°
  • Front Axle - Wheel Lean - Left/Right 17.1° 17.1°

Moldboard

  • Blade Width 14.0 ft 4.2 m
  • Arc Radius 16.3 in 413.0 mm
  • Throat Clearance 4.6 in 117.0 mm
  • Blade Height - With Cutting Edge 24.9 in 631.0 mm
  • Blade Height - Without Cutting Edge 23.0 in 585.0 mm
  • Blade Width - With End Bits 169.0 in 4290.0 mm
  • Blade Width - Without End Bits 164.0 in 4166.0 mm

Blade Range

  • Maximum Depth of Cut 23.3 in 593.0 mm
  • Blade Tip Range - Backward
  • Blade Tip Range - Forward 40° 40°
  • Circle Centershift - Left 25.6 in 650.0 mm
  • Circle Centershift - Right 20.5 in 520.0 mm
  • Maximum Lift Above Ground 16.5 in 419.0 mm
  • Maximum Shoulder Reach Outside of Tires - Left 73.6 in 1870.0 mm
  • Maximum Shoulder Reach Outside of Tires - Right 78.9 in 2004.0 mm
  • Moldboard Sideshift - Left 29.1 in 740.0 mm
  • Moldboard Sideshift - Right 31.1 in 790.0 mm

Weights

  • Operating Weight - Typically Equipped 57250.0 lb 25968.0 kg
  • Gross Vehicle Weight - Base* - Front Axle 13994.0 lb 6344.0 kg
  • Gross Vehicle Weight - Base* - Rear Axle 36994.0 lb 16780.0 kg
  • Gross Vehicle Weight - Base* - Total 50980.0 lb 23124.0 kg
  • Gross Vehicle Weight - Typically Equipped - Front Axle 15245.0 lb 6915.0 kg
  • Gross Vehicle Weight - Typically Equipped - Rear Axle 42005.0 lb 19053.0 kg
  • Gross Vehicle Weight - Typically Equipped - Total 57250.0 lb 25968.0 kg
  • Note *Base operating weight calculated on standard machine configuration with 20.5 R25 tires, full fuel tank operator and ROPS cab. *Base operating weight calculated on standard machine configuration with 20.5 R25 tires, full fuel tank operator and ROPS cab.

Air Conditioning System

  • Air Conditioning The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 2.0 kg (4.4 lb) of refrigerant which has a CO2 equivalent of 2.860 metric tonne (2.76 ton). The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 2.0 kg (4.4 lb) of refrigerant which has a CO2 equivalent of 2.860 metric tonne (2.76 ton).

Technology

  • Optional Stable Blade improves grading precision by decreasing engine speed at 15 percent intervals when machine bounce is detected then increases engine rpm systematically when grader stabilizes.
  • Optional Cat GRADE with Cross Slope helps maintain desired cross slope by automatically controlling one side of the blade.
  • Optional Cat AccuGrade™ uses positioning and guidance technologies, machine sensors, and automatic blade control to help get to grade faster, easier, and more efficiently.
  • Optional Auto Articulation allows you to articulate automatically while steering in tight spaces or around curves, obstacles, and turnarounds.

Performance

        
  • Cat C13 ACERT™ engine meets U.S. EPA Tier 4 Final/EU Stage IV, Tier 3/Stage IIIA equivalent or Tier 2/Stage II equivalent emission standards, depending on emission standards of specific country.
  •     
  • Standard Economy Mode can be turned on to limit maximum engine speed which helps reduce fuel consumption.
  •     
  • Standard VHP Plus provides ideal amount of power in all gears.
  •     
  • Standard Automatic Differential Lock unlocks differential during a turn and re-locks when straight for easier operation and improved power train protection.

Efficiency

        
  • Load-sensing system and advanced electrohydraulics give operator superior implement control and hydraulic performance.
  •     
  • Proportional Priority Pressure-Compensating valves have different flow rates for head and rod ends of cylinder so machine responds consistently and predictably.
  •     
  • Balanced hydraulic flow is proportioned to ensure all implements will operate simultaneously without slowing engine or speed of some implements.

Ease of Operation

        
  • Simple, intuitive joystick controls replace levers, so hand and arm movement is reduced by 78%, helping reduce operator fatigue.
  •     
  • Optional Advanced Control Joysticks allow operator to control automated grading solutions efficiently and safely without removing hands from the joysticks.
  •     
  • Selectable blade lift modes – Fine, Normal, or Coarse – allow operator to match application requirements.
  •     
  • Articulation Return-to-Center automatically returns machine to a straight frame position from any angle with the touch of a button.

Safety

        
  • Optional rear vision camera enhances sight to rear of machine.
  •     
  • Electrical disconnect and engine shutoff switches are ground level.
  •     
  • Operator Presence System keeps parking brake engaged and hydraulic implements disabled until operator is seated and machine is ready for operation.
  •     
  • Hydraulic Lockout disables all implement functions while still providing machine steering control – especially useful while roading.
  •     
  • Optional seat belt indicator promotes safe operating habits.

Serviceability

        
  • Convenient access from the top of the circle to the patented top-adjust wear strips and inserts make them easy to add or replace.
  •     
  • Shimless Moldboard Retention System uses vertical and horizontal adjusting screws to keep moldboard wear strips aligned for reduced blade chatter and precise blade control.

14M3 Standard Equipment

OPERATOR ENVIRONMENT

  • Joystick, power adjustable armrests
  • Air conditioner with heater
  • Centershift pin indicator
  • Coat hook
  • Cup holder
  • Display, digital speed and gear
  • Doors, left and right side with wiper
  • Gauges (analog) inside cab (includes fuel, articulation, engine coolant temp, engine rpm, and hydraulic oil temp)
  • Gauges, machine level
  • Message display
  • Joystick gear selection
  • Joystick hydraulic controls for implements, steering, transmission
  • Ladders, cab, left and right side
  • Lights, left and right side lights
  • Lights, night time cab, LED
  • Meter, hour, digital
  • Mirror, inside rearview, wide angle
  • Power port, 12V
  • Radio ready, entertainment
  • ROPS cab, sound suppressed, less than 73 dB(A) ISO 6394 (70% fan speed)
  • Seat, mechanical suspension, cloth
  • Storage compartments
  • Throttle control, electronic

POWER TRAIN

  • Air cleaner, dual stage, dry-type radial seal with service indicator through messenger and dust ejector
  • Articulation, automatic Return-to-Center
  • Air-to-Air After Cooler (ATAAC)
  • Auto Diff Lock
  • Brake wear indication
  • Brakes, oil disc, four-wheel, hydraulic
  • Consistent power to ground
  • Monitoring system
  • Clutch, circle drive slip
  • Differential, lock/unlock*
  • Drain, engine oil, ecology
  • Demand fan, hydraulic
  • Engine ECO Mode
  • Ether starting aid
  • Fuel tank, ground level
  • Fuel-water separator
  • Hydraulic demand fan
  • Muffler, under hood (China Nonroad Stage III and Tier 3/Stage IIIA/Tier 2/Stage II equivalent)
  • Optimized VHP
  • Parking brake - multi disc, sealed, oil-cooled
  • Priming pump, fuel
  • Sediment drain, fuel tank
  • Three variations of the C13 engine with ACERT technology. One meets Tier 4 Final/Stage IV emission standards and is required for higher regulated countries. One meets Tier 3/Stage IIIA/China Nonroad Stage III standards, depending on emission standards of the specific country. One meets Tier 2/Stage II equivalent emission standards and is available for lesser or non-regulated countries, depending on standards of the specific country.
  • Transmission, 8F/6R, power shift, direct drive

ELECTRICAL

  • Alternator, 150 ampere, sealed
  • Batteries, maintenance free, HD, 1,125 CCA
  • Breaker panel
  • Electrical system, 24V*
  • Belt, serpentine, automatic tensioner
  • Lights: reversing (LED), roof-mounted roading, stop and tail (LED)
  • Product Link
  • Starter, electric
  • Service lights, enclosure, rear, LED

SAFETY

  • Alarm, back up
  • Ground level engine shutdown
  • Hammer (emergency exit)
  • Horn, electric
  • Lockout, hydraulic implement for roading
  • Operator Not Present Monitoring system
  • Paint, glare reducing - top of front frame, rear enclosure and ripper cylinders
  • Seat belt, retractable 76 mm (3 in)
  • Secondary steering
  • Windows, laminated glass: Fixed front with intermittent wiper; Side and rear wipers (3)

14M3 Optional Equipment

OPERATOR ENVIRONMENT

  • Air horn
  • Heated door
  • Mirrors high visibility
  • Mirrors, outside heated 24V
  • Mirrors, outside mounted
  • Seat, heated
  • Seat, heated/ventilated
  • Rearview camera
  • Seat belt indicator

POWER TRAIN

  • Transmission, autoshift
  • Engine, compression brake

TECHNOLOGY

  • Cat GRADE with Cross Slope
  • Stable Blade
  • Advanced Control Joysticks
  • Auto Articulation

GUARDS

  • Debris guard
  • Front axle cylinder guards
  • Rear fenders
  • Sound suppression, engine enclosure and transmission
  • Transmission guard
  • Accumulators, blade lift
  • Fast fill fuel, 378.5 L/min (100 gal/min)
  • Metallic DCM wear strips

ELECTRICAL

  • Light, LED, warning strobe
  • Lights, front headlights high
  • Lights, front headlights low
  • Mounting, for warning light
  • Working lights halogen
  • Working lights LED

SAFETY

  • Additional rearview camera and monitor
  • Machine security system key

OTHER ATTACHMENTS

  • Moldboard, 4.9 m (16 ft)
  • Heater, engine coolant, 120V
  • Heater, engine coolant, 240V
  • Hydraulic arrangements with additional hydraulic valves: Base +1, Base +3, Base +4, Base +5, Base +6
  • Product Link satellite, cellular
  • Rim, 431.8 mm x 635 mm (17 in x 25 in) MP (spare)
  • Snow wing, mounting frame ready
  • Fast fill

WORK TOOLS/G.E.T.

  • 4.9 m (16 ft) blade with flat cutting edge 254 mm x 35 mm (10in x 1 3/8 in )
  • Push block, counterweight
  • Ripper, rear
  • Tooth, ripper

FLUIDS

  • Coolant, -51 degrees C (-60 degrees F)

News & Events

View the latest company and product news, events and customer stories.

Promotions

View the latest offers available on a range of Cat® equipment and genuine parts.

Social Media

Connect with us to learn more about our company, products, services and customers.

Branch Locations

With branches across the UK & Ireland, you can be sure that we’re never far away.

Services

Effectively manage your equipment to reduce operating costs and improve efficiency.

Technology

Integrated technology can help you understand your equipment's output and help extend its lifespan.

Finance

Quick and easy financing with customised payment plans through Cat Financial.

Please share your feedback on Finning.com!

Close window

We are committed to providing you with the best site experience possible.  Please take our brief survey to tell us how we are doing.

Thank you in advance for your time!