Menu

24 (2018)

Select Units

Overview

The Cat® 24 Motor Grader continues the Caterpillar tradition of being the industry leader in enabling you to build and maintain your haul roads to maximize your mine-site productivity and lower your owning and operating costs. The 24 motor grader is designed to help you get more work done in less time while keeping you safe and comfortable.

Engine

  • Base Power (1st Gear) - Net 535.0 HP 399.0 kW
  • Engine Model Cat C27 ACERT Cat C27 ACERT
  • Bore 5.4 in 137.2 mm
  • Stroke 6.0 in 152.4 mm
  • Speed at Rated Power 1,800 rpm 1,800 rpm
  • Base Power (1st gear) - Net (Tier 4) 535.0 HP 399.0 kW
  • Emissions Tier 4 Final/Stage IV or Equivalent to Tier 2/Stage II Tier 4 Final/Stage IV or Equivalent to Tier 2/Stage II
  • Maximum Altitude - Full Power (Tier 2) 15000.0 ft 4572.0 m
  • Maximum Altitude - Full Power (Tier 4) 10000.0 ft 3048.0 m
  • Note (1) Net power is tested per ISO 9249, SAE J1349, and EEC 80/1269 Standards in effect at the time of manufacture. Net power is tested per ISO 9249, SAE J1349, and EEC 80/1269 Standards in effect at the time of manufacture.
  • Note (2) Optimized VHP Plus is standard for the 24. Optimized VHP Plus is standard for the 24.
  • Note (3) Net power advertised is the power available at rated speed of 1,800 rpm, measured at the flywheel when engine is equipped with fan, air cleaner, muffler and alternator. Net power advertised is the power available at rated speed of 1,800 rpm, measured at the flywheel when engine is equipped with fan, air cleaner, muffler and alternator.
  • Note (4) Power as declared per ISO 14396. Rated rpm 1,800 (561 hp) Power as declared per ISO 14396. Rated rpm 1,800 (561 hp)
  • Peak Net Torque 2417.0 ft·lbf 3277.0 N·m
  • Standard - Fan Speed 1,300 rpm 1,300 rpm
  • Standard Capability 122.0 °F 50.0 °C
  • Torque Rise 19% 19%
  • Displacement 1648.0 in³ 27.03 l
  • Number of Cylinders 12 12

Front Frame Structure

  • Circle - Outer Diameter 104.0 in 2631.0 mm
  • Front Axle - Total Oscillation per Side 32° 32°
  • Front Axle - Wheel Lean - Left/Right 18° 18°

Moldboard

  • Blade Width 24.0 ft 7.3 m
  • Blade Height 40.0 in 1025.0 mm
  • Thickness 2.0 in 50.0 mm

Blade Range

  • Maximum Depth of Cut 21.7 in 550.0 mm
  • Blade Tip Range - Backward
  • Blade Tip Range - Forward 40° 40°
  • Circle Centershift - Left 31.7 in 804.0 mm
  • Circle Centershift - Right 17.2 in 437.0 mm
  • Maximum Lift Above Ground 16.1 in 410.0 mm
  • Maximum Shoulder Reach Outside of Rear Tires - Left 125.0 in 3175.0 mm
  • Maximum Shoulder Reach Outside of Rear Tires - Right 125.0 in 3175.0 mm
  • Moldboard Sideshift - Left 38.2 in 970.0 mm
  • Moldboard Sideshift - Right 45.3 in 1150.0 mm

Weights

  • Operating Weight - Typically Equipped 161695.0 lb 73344.0 kg
  • Gross Vehicle Weight - Base* - Front Axle 43858.0 lb 19894.0 kg
  • Gross Vehicle Weight - Base* - Rear Axle 113910.0 lb 51669.0 kg
  • Gross Vehicle Weight - Base* - Total 157769.0 lb 71563.0 kg
  • Gross Vehicle Weight - Typically Equipped - Front Axle 44466.0 lb 20169.0 kg
  • Gross Vehicle Weight - Typically Equipped - Rear Axle 117229.0 lb 53125.0 kg
  • Gross Vehicle Weight - Typically Equipped - Total 161695.0 lb 73344.0 kg
  • Note *Base operating weight calculated on standard machine configuration with 29.5R29 tires, full fuel tank, operator and ROPS cab. *Base operating weight calculated on standard machine configuration with 29.5R29 tires, full fuel tank, operator and ROPS cab.

Air Conditioning System

  • Air Conditioning The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 2.0 kg of refrigerant which has a CO2 equivalent of 2.860 metric tonne. The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 2.0 kg of refrigerant which has a CO2 equivalent of 2.860 metric tonne.

Serviceability

  • The improved power train rebuild life, new modular design and new machine protection features can save you up to 2,400 servicing hours over the life of the machine.*
  • Cat C27 ACERT™ engine, 533 mm (21 in) transmission and lower power train provide 33 percent additional machine life before needing to be rebuilt.**
  • New, innovative main component modular design means they can be removed and installed quicker and easier. Transmission and cooling package can be removed up to 70 percent faster than the 24M.
  • Fluid Service Center provides single location at ground level for access to engine, transmission, hydraulic oil and coolant. This feature, along with clustered filters and extended service intervals, saves you maintenance time and operating costs.
  • Hoses and electrical harnesses are split at easily accessible bulkhead locations allowing your service technicians to work with smaller sections easier and faster.
  • Ok-to-Start and Critically Low Fluid monitoring systems protect your machine by providing electronic verification of fluid levels and alerting you when low fluid levels are detected, protecting your machine.

Performance

  • Cat C27 ACERT engine provides enhanced altitude capabilities with no derate up to 3048 m (10,000 ft) for U.S. EPA Tier 4/EU Stage IV emission standards and 4572 m (15,000 ft) for equivalent Tier 2/Stage II emissions.
  • An 11 percent weight increase helps provide more traction and blade down pressure than the 24M.
  • Consistent Power-to-the-Ground changes real-time engine power levels to offset cooling fan losses resulting in best performance at all times independent of ambient conditions.

Safety

  • Fifteen tie-off points located around engine enclosure and cab provide secure tie off hooks protecting you and your technicians when performing service operations.
  • Optional Working at Heights package adds an extra layer of safety by providing handrails and hand holds to improve access and safety.
  • The 24 is a Fire Suppression-Ready machine which means you can easily install a fire suppression system to further protect your investment.
  • Standard rearview camera provides better visibility from the cab to behind the machine while optional front-facing cameras provide enhanced forward and side visibility.
  • Standard seat belt indicator provides visual/audible alerts when the seat belt is not in use. The 24 is pre-wired so you can easily install a beacon on top of the cab to indicate seat belt usage.

Technology

  • The 24 features asset protection and performance-improving technologies including: engine overspeed/underspeed, second generation steering system, articulation eStop, ripper auto stow, implements lock out and circle angle limits, to name a few.
  • Standard Cat GRADE with Cross Slope improves operator productivity and haul road quality and durability by helping maintain desired cross slope for appropriate water drainage by automatically controlling one side of the blade.
  • The Cat 24 is MineStar™ ready and includes Cat Product Link™ Elite and VIMS™ to help optimize equipment management, remote monitoring capabilities, machine availability and component life while reducing both repair cost and the risk of a catastrophic failure.

*Life assumed is 64,000 hours.

**24 power train rebuild life target is 16,000 hours.

News & Events

View the latest company and product news, events and customer stories.

Default Offer

View the latest offers available on a range of Cat® equipment and genuine parts.

Social Media

Connect with us to learn more about our company, products, services and customers.

Branch Locations

With branches across the UK & Ireland, you can be sure that we’re never far away.

Services

Effectively manage your equipment to reduce operating costs and improve efficiency.

Technology

Integrated technology can help you understand your equipment's output and help extend its lifespan.

Finance

Quick and easy financing with customised payment plans through Cat Financial.

Please share your feedback on Finning.com!

Close window

We are committed to providing you with the best site experience possible.  Please take our brief survey to tell us how we are doing.

Thank you in advance for your time!