Menu

910M

Optimized Z-bar Loader Linkage

The Cat Optimized Z-bar Loader linkage combines the digging efficiency of a traditional Z-bar with tool carrier capabilities for great performance and versatility. With parallel lift and high tilt forces throughout the working range you can safely and confidently handle loads with precise control.

Work Tools

The 910M features the Cat exclusive, Performance Series Buckets, as well as high visibility pallet forks. These tools enhance productivity and are available with either an Integrated Toolcarrier (IT) or ISO (wide) coupler style. Legacy coupler tools such as brooms, grapple buckets, multi-purpose buckets and other work tools remain compatible.

Hydraulic and Controls

State of the art electro-hydraulic system provides low effort, fine control with fast cycle times. All-in-one joystick helps keep eyes on the work. Operator can adjust machine responsiveness with the push of a button, which allows the operator to set up the machine exactly the way they want it based on the application.

Tuned Drivetrain

Smooth shifting and powerful acceleration is matched with modulated hydrostatic braking in the inching/braking pedal, creating a rhythm for material moving. Creeper and electronic engine speed control makes broom and snow blower work easy. Operator tunes between smooth or aggressive shifting with the push of a button.

Cab

All around visibility is further enhanced with the availability of a rearview camera. The deluxe cab ensures operator comfort with a heated, air suspension seat and easy to use controls. Available features such as Implement and Hystat Aggressiveness, Ride Control, Lift and Tilt Kickouts, Engine Speed Control and Rimpull Control allow the operator to customize the machine via a soft touch keypad.

Serviceability

Extended service intervals and excellent service access make daily checks quick and easy allowing you to get to work sooner.

Efficiently Powerful

High full turn tipping loads, powerful breakout forces and increased engine power the M Series delivers a balanced solution for all customer applications.

Standard Fuel Savings

Features such as Eco Mode, On Demand Cooling Fan, and Auto Engine Idle Shutdown make the 910M both powerful and fuel efficient.

Select Units

Overview

Engine

  • Maximum Gross Power 100.0 HP 74.0 kW
  • Net Power 97.0 HP 72.0 kW
  • Engine Model Cat C4.4 ACERT� Cat C4.4 ACERT�
  • Maximum Gross Power - ISO 14396 100.0 HP 74.0 kW
  • Maximum Gross Power - ISO 14396 (DIN) 101.0 HP 74.0 kW
  • Maximum Gross Power - Maximum Engine Speed 2350.0 r/min 2350.0 r/min
  • Maximum Gross Power - SAE J1995 102.0 HP 76.0 kW
  • Rated Net Power - Rated Engine Speed 2200.0 r/min 2200.0 r/min
  • Rated Net Power - SAE J1349 96.0 HP 72.0 kW
  • Bore 4.13 in 105.0 mm
  • Displacement 268.0 in³ 4.4 l
  • Emissions Engine meets U.S. EPA Tier 4 Final/EU Stage IV emission standards. Engine meets U.S. EPA Tier 4 Final/EU Stage IV emission standards.
  • Maximum Gross Torque - ISO 14396 332.0 ft·lbf 450.0 N·m
  • Maximum Gross Torque - SAE J1995 336.0 ft·lbf 455.0 N·m
  • Maximum Net Torque - ISO 9249 329.0 ft·lbf 446.0 N·m
  • Maximum Net Torque - SAE J1349 325.0 ft·lbf 441.0 N·m
  • Note Net power advertised is the power available at the flywheel plus front drive implement pump when the engine is equipped with fan, air cleaner, muffler and alternator. Net power advertised is the power available at the flywheel plus front drive implement pump when the engine is equipped with fan, air cleaner, muffler and alternator.
  • Rated Net Power - ISO 9249 97.0 HP 72.0 kW
  • Rated Net Power - ISO 9249 (DIN) 98.0 HP 72.0 kW
  • Stroke 5.0 in 127.0 mm

Weights

  • Operating Weight 17893.0 lb 8116.0 kg

Service Refill Capacities

  • Cooling System 5.7 gal (US) 21.5 l
  • Fuel Tank 40.7 gal (US) 154.0 l
  • Engine Crankcase 2.3 gal (US) 8.8 l
  • Hydraulic System - Including Tank 25.9 gal (US) 98.0 l
  • Axles - Front Center Differential 2.0 gal (US) 7.5 l
  • Axles - Rear Center Differential 2.0 gal (US) 7.5 l
  • Diesel Exhaust Fluid (DEF) Tank 5.0 gal (US) 18.9 l
  • Hydraulic Tank 14.5 gal (US) 55.0 l
  • Note DEF used in Cat SCR systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1. DEF used in Cat SCR systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1.
  • Transmission 0.9 gal (US) 3.4 l

Operating Specifications

  • Rated Bucket Capacity 2.5 yd³ 1.9 m³

Buckets

  • Bucket Capacities 1.3 m3-1.9 m3 (1.7 yd3-2.5 yd3) 1.3 m3-1.9 m3 (1.7 yd3-2.5 yd3)

Cab

  • ROPS ISO 3471:2008 ISO 3471:2008
  • FOPS ISO 3449:2005 Level II ISO 3449:2005 Level II
  • Note (1) Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe. Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.
  • Note (2) The declared dynamic operator sound pressure levels per ISO 6396:2008*, when properly installed and maintained, is 77 dB(A). The declared dynamic operator sound pressure levels per ISO 6396:2008*, when properly installed and maintained, is 77 dB(A).
  • Note (3) The labelled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC is 103 dB(A). The labelled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC is 103 dB(A).
  • Note (4) *The measurements were conducted with the cab doors and windows closed. *The measurements were conducted with the cab doors and windows closed.

Axles

  • Front Fixed; Locking differential (standard) Fixed; Locking differential (standard)
  • Rear Oscillating �11 degrees; Locking differential (Standard) Oscillating �11 degrees; Locking differential (Standard)

Loader Hydraulic System

  • Hydraulic Cycle Time - Dump, at Maximum Reach 1.4 s 1.4 s
  • Hydraulic Cycle Time - Float Down, Maximum Lift to Ground Level 3.7 s 3.7 s
  • Hydraulic Cycle Time - Rackback 2.2 s 2.2 s
  • Hydraulic Cycle Time - Raise, Ground Level to Maximum Lift 5.2 s 5.2 s
  • Hydraulic Cycle Time - Total Cycle Time 12.5 s 12.5 s
  • Maximum Flow - Implement Pump 32.0 gal/min 122.0 l/min
  • Maximum Flow - Implement Pump - 3rd Function, Maximum Flow 24.0 gal/min 90.0 l/min
  • Maximum Flow - Implement Pump - 4th Function, Maximum Flow 24.0 gal/min 90.0 l/min
  • Maximum Working Pressure - Implement Pump 3408.0 psi 23500.0 kPa
  • Relief Pressure - Tilt Cylinder 4931.0 psi 34000.0 kPa
  • Relief Pressure - Tilt Cylinder - 3rd Function Maximum Working Pressure 3046.0 psi 21000.0 kPa
  • Relief Pressure - Tilt Cylinder - 4th Function Maximum Working Pressure 3046.0 psi 21000.0 kPa

Steering

  • Maximum Flow - Steering Pump 17.0 gal/min 66.0 l/min
  • Maximum Working Pressure - Steering Pump 2683.0 psi 18500.0 kPa
  • Number of Steering Wheel Turns - Full Left to Full Right or Full Right to Full Left 3.75 turns 3.75 turns
  • Steering Articulation Angle - Each Direction 40.0 ° 40.0 °
  • Steering Cycle Times - Full Left to Full Right - At 2,350 rpm: 90 rpm Steering Wheel Speed 3.2 s 3.2 s

Tires

  • Note (1) Other tire choices are available. Contact your Cat dealer for details. Other tire choices are available. Contact your Cat dealer for details.
  • Note (2) In certain applications, the loader's productive capabilities may exceed the tire's tonnes-km/h (ton-mph) capabilities. In certain applications, the loader's productive capabilities may exceed the tire's tonnes-km/h (ton-mph) capabilities.
  • Note (3) Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model. Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model.
  • Other Choices Include 15.5-R25; 17.5-25 12PR; 17.5-25 12PR L2; 17.5-R25 XHA * L3; 17.5-R25 * L2/L3 PC RM; 17.5-25 16PR L3, 3PC Rim; 17.5-25 GY L2/L3; 17.5-25 12PR L2, SNOW; Flexport� 15.5-R25; 17.5-25 12PR; 17.5-25 12PR L2; 17.5-R25 XHA * L3; 17.5-R25 * L2/L3 PC RM; 17.5-25 16PR L3, 3PC Rim; 17.5-25 GY L2/L3; 17.5-25 12PR L2, SNOW; Flexport�
  • Standard Size 15.5-25 12PR 15.5-25 12PR

Transmission

  • Forward and Reverse - High Range 25.0 mile/h 40.0 km/h
  • Forward and Reverse - Low Range, Speed Range 1* 6.3 mile/h 10.0 km/h
  • Forward and Reverse - Low Range, Speed Range 2* 12.5 mile/h 20.0 km/h
  • Note *Creeper Control allows speed control from a stand still up to 10 km/h (6.3 mph). The Creeper Control will only work in Range 1. *Creeper Control allows speed control from a stand still up to 10 km/h (6.3 mph). The Creeper Control will only work in Range 1.
News & Events

View the latest company and product news, events and customer stories.

Default Offer

View the latest offers available on a range of Cat® equipment and genuine parts.

Social Media

Connect with us to learn more about our company, products, services and customers.

Branch Locations

With branches across the UK & Ireland, you can be sure that we’re never far away.

Services

Effectively manage your equipment to reduce operating costs and improve efficiency.

Technology

Integrated technology can help you understand your equipment's output and help extend its lifespan.

Finance

Quick and easy financing with customised payment plans through Cat Financial.

Please share your feedback on Finning.com!

Close window

We are committed to providing you with the best site experience possible.  Please take our brief survey to tell us how we are doing.

Thank you in advance for your time!