Menu
Contact
Locations
Search
New Wheel Loaders

950M (TIER 4/STAGE IV) (2017)

Request A Quote
Select Units

Overview

The new 950M Wheel Loader, with the 2017 product update, applies proven technologies systematically and strategically to meet your high expectations for reliability, productivity, fuel efficiency, and long service life. Meets U.S. EPA Tier 4 Final and EU Stage IV emission standards.

Engine

  • Net Power - ISO 9249 230.0 HP 171.0 kW
  • Engine Model Cat C7.1 ACERT Cat C7.1 ACERT
  • Displacement 428.0 in³ 7.01 l
  • Maximum Net Power - 2,100 rpm - ISO 9249 230.0 HP 171.0 kW
  • Maximum Net Power - 2,100 rpm - ISO 9249 - Metric 232.0 HP 171.0 kW
  • Maximum Net Power - 2,100 rpm - SAE J1349 230.0 HP 171.0 kW
  • Maximum Power - 2,100 rpm - ISO 14396 249.0 HP 186.0 kW
  • Maximum Power - 2,100 rpm - ISO 14396 - Metric 253.0 HP 186.0 kW
  • Maximum Power - 2,100 rpm - SAE J1995 250.0 HP 187.0 kW
  • Peak Gross Torque - 1,300 rpm - ISO 14396 908.0 ft·lbf 1231.0 N·m
  • Peak Gross Torque - 1,300 rpm - SAE J1995 911.0 ft·lbf 1235.0 N·m
  • Maximum Net Torque - 1,300 rpm 858.0 ft·lbf 1163.0 N·m
  • Note The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.6 kg of refrigerant which has a CO2 equivalent of 2.288 metric tonnes. The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.6 kg of refrigerant which has a CO2 equivalent of 2.288 metric tonnes.

Weights

  • Operating Weight 42357.0 lb 19213.0 kg
  • Note Weight based on a machine configuration with Michelin 23.5R25 XHA2 L3 radial tires, full fluids, operator, standard counterweight, cold start, roading fenders, Product Link?, manual diff lock/open axles (front/rear), power train guard, secondary steering, Weight based on a machine configuration with Michelin 23.5R25 XHA2 L3 radial tires, full fluids, operator, standard counterweight, cold start, roading fenders, Product Link?, manual diff lock/open axles (front/rear), power train guard, secondary steering,

Buckets

  • Bucket Capacities 2.5-9.2 m? (3.3-12.0 yd?) 2.5-9.2 m? (3.3-12.0 yd?)

Operating Specifications

  • Breakout Force 40690.0 lbf 181.0 kN
  • Static Tipping Load - Full 40° Turn - No Tire Deflection 25926.0 lb 11760.0 kg
  • Static Tipping Load - Full 40° Turn - With Tire Deflection 24262.0 lb 11005.0 kg
  • Note (1) For a machine configuration as defined under ?Weight.? For a machine configuration as defined under ?Weight.?
  • Note (2) Full compliance to ISO 143971:2007 Sections 1 thru 6, which requires 2% verification between calculations and testing. Full compliance to ISO 143971:2007 Sections 1 thru 6, which requires 2% verification between calculations and testing.

Transmission

  • Forward - 1 4.3 mile/h 6.9 km/h
  • Forward - 2 7.5 mile/h 12.0 km/h
  • Forward - 3 12.0 mile/h 19.3 km/h
  • Forward - 4 16.0 mile/h 25.7 km/h
  • Reverse - 1 4.3 mile/h 6.9 km/h
  • Reverse - 2 7.5 mile/h 12.0 km/h
  • Reverse - 3 16.0 mile/h 25.7 km/h
  • Forward - 5 24.5 mile/h 39.5 km/h
  • Note Maximum travel speed in standard vehicle with empty bucket and standard L3 tires with 787 mm (31 in) roll radius. Maximum travel speed in standard vehicle with empty bucket and standard L3 tires with 787 mm (31 in) roll radius.

Hydraulic System

  • Hydraulic Cycle Time - Total 8.9 s 8.9 s
  • Implement Pump Type Variable Axial Piston Variable Axial Piston
  • Implement System - Maximum Operating Pressure 4250.0 psi 29300.0 kPa
  • Implement System - Maximum Pump Output at 2,150 rpm 76.0 gal/min 286.0 l/min

Service Refill Capacities

  • Cooling System 15.6 gal (US) 59.0 l
  • Crankcase 5.8 gal (US) 22.0 l
  • DEF Tank 4.2 gal (US) 16.0 l
  • Differential - Final Drives - Front 11.4 gal (US) 43.0 l
  • Differential - Final Drives - Rear 11.4 gal (US) 43.0 l
  • Fuel Tank 72.6 gal (US) 275.0 l
  • Hydraulic Tank 33.0 gal (US) 125.0 l
  • Transmission 11.4 gal (US) 43.0 l

Sound

  • With Cooling Fan Speed at Maximum Value - Exterior Sound Power Level (ISO 6395:2008) 107.0 dB(A) 107.0 dB(A)
  • With Cooling Fan Speed at Maximum Value - Exterior Sound Pressure Level (SAE J88:2013) 75 dB(A)* 75 dB(A)*
  • With Cooling Fan Speed at Maximum Value - Operator Sound Pressure Level (ISO 6396:2008) 70.0 dB(A) 70.0 dB(A)
  • Note (1) *Distance of 15 m (49.2 ft), moving forward in second gear ratio. *Distance of 15 m (49.2 ft), moving forward in second gear ratio.
  • Note (2) **For machines in European Union countries and in countries that adopt the ?EU Directives.? **For machines in European Union countries and in countries that adopt the ?EU Directives.?
  • Note (3) ***European Union Directive ?2000/14/EC? as amended by ?2005/88/EC.? ***European Union Directive ?2000/14/EC? as amended by ?2005/88/EC.?
  • With Cooling Fan Speed at 70% of Maximum Value - Exterior Sound Power Level (ISO 6395:2008)** 104 LWA*** 104 LWA***
  • With Cooling Fan Speed at 70% of Maximum Value - Operator Sound Pressure Level (ISO 6396:2008)** 69.0 dB(A) 69.0 dB(A)

Bucket Capacities

  • Bucket Range 2.5-9.2 m? (3.3-12.0 yd?) 2.5-9.2 m? (3.3-12.0 yd?)

Dimensions - High Lift

  • Centerline of Rear Axle to Edge of Counterweight 6.33 ft 1942.0 mm
  • Centerline of Rear Axle to Hitch 5.5 ft 1675.0 mm
  • Ground Clearance 1.17 ft 367.0 mm
  • Height - Top of Exhaust Pipe 11.17 ft 3413.0 mm
  • Height - Top of Hood 8.83 ft 2697.0 mm
  • Height - Top of ROPS 11.33 ft 3451.0 mm
  • Hinge Pin Height at Carry Height 2.58 ft 782.0 mm
  • Hinge Pin Height at Maximum Lift 14.83 ft 4527.0 mm
  • Lift Arm Clearance at Maximum Lift 11.92 ft 3634.0 mm
  • Maximum Width - Over Tires - Loaded 9.25 ft 2822.0 mm
  • Note All dimensions are approximate and based on Michelin 23.5R25 XHA2 L3 radial tires. All dimensions are approximate and based on Michelin 23.5R25 XHA2 L3 radial tires.
  • Overall Length - Without Bucket 24.58 ft 7488.0 mm
  • Rack Back - Carry Height 49 degrees 49 degrees
  • Rack Back - Maximum Lift 59 degrees 59 degrees
  • Rack Back at Ground 40 degrees 40 degrees
  • Tread Width 7.0 ft 2140.0 mm
  • Wheel Base 11.0 ft 3350.0 mm

Dimensions - Standard Lift

  • Centerline of Rear Axle to Edge of Counterweight 6.33 ft 1942.0 mm
  • Centerline of Rear Axle to Hitch 5.5 ft 1675.0 mm
  • Ground Clearance 1.17 ft 367.0 mm
  • Height - Top of Exhaust Pipe 11.17 ft 3413.0 mm
  • Height - Top of Hood 8.83 ft 2697.0 mm
  • Height - Top of ROPS 11.33 ft 3451.0 mm
  • Hinge Pin Height at Carry Height 2.08 ft 647.0 mm
  • Hinge Pin Height at Maximum Lift 13.25 ft 4027.0 mm
  • Lift Arm Clearance at Maximum Lift 10.75 ft 3280.0 mm
  • Maximum Width - Over Tires - Loaded 9.25 ft 2822.0 mm
  • Note All dimensions are approximate and based on Michelin 23.5R25 XHA2 L3 radial tires. All dimensions are approximate and based on Michelin 23.5R25 XHA2 L3 radial tires.
  • Overall Length - Without Bucket 22.67 ft 6906.0 mm
  • Rack Back - Carry Height 49 degrees 49 degrees
  • Rack Back - Maximum Lift 59 degrees 59 degrees
  • Rack Back at Ground 36 degrees 36 degrees
  • Tread Width 7.0 ft 2140.0 mm
  • Wheel Base 11.0 ft 3350.0 mm

Reliability

  • Cat® C7.1 ACERT™ engine and automatic Cat Regeneration System offers increased power density with a combination of proven electronic, fuel and air systems.
  • Utilizing rigorous component design and machine validation processes results in unmatched reliability, durability and high uptime.

Durability

  • Tough countershaft powershift transmission and axles handle extreme applications.
  • Full flow hydraulic filtration system with additional loop filtration improves hydraulic system robustness and component life.

Productivity

  • Engine power increased by approximately 16% improves machine performance and response (compared to H Series).
  • Lock-up clutch torque converter, combined with lock-to-lock shifting, delivers smooth shifts, fast acceleration and speed on grade.
  • Optimized Z-bar linkage provides high breakout force at ground level along with excellent –0°/+5° parallelism for precise work tool control.
  • Easy-to-load Performance Series Buckets feature a wider mouth and curved side plates that improve material retention (fill factor) and decrease cycle times.
  • On-the-go disc-type front manual differential locks (front and rear fully automatic option).
  • Optional auxiliary counterweight option offers slightly higher payload capability for loose aggregate rehandling.*
*Optional configurations and equipment may vary from region to region and requires conformance to Caterpillar payload policy. Consult your dealer or Caterpillar representative for details.

Fuel Efficiency

  • Up to 10% more fuel efficient than K Series and up to 25% more fuel efficient than H Series loaders.**
  • Power dense ACERT engine burns less fuel by providing power and torque when needed.
  • Standard productive Economy Mode provides maximum fuel savings with minimal productivity impact.
**Actual results may vary based on factors such as, but not limited to, machine configuration, operator technique, machine application, climate, etc.

Ease of Operation

  • Best-in-class operator environment provides unmatched comfort, visibility, and efficiency.
  • Steering wheel (E-H joystick steering option).
  • Intuitive, ergonomic controls and touch screen multifunction display keep operators focused on their work.
  • Ride control system with dual accumulators provides excellent ride quality and lowers cab vibrations.

Safety

  • Excellent cab access with wide door, remote door opening option and stair-like steps.
  • Floor to ceiling windshield, large mirrors with integrated spot mirrors and rear vision camera provide industry leading all-around visibility.

Serviceability

  • One-piece tilting hood with side and rear doors; hydraulic and electrical service centers make access fast and easy.
  • Safe, ground level access to fuel fill and daily maintenance points means less servicing time is required.
  • Optional, fully integrated Cat Autolube system provides full lube system monitoring and diagnostic test visibility.

Cat Connect Technology

  • Monitor, manage and enhance job site operations.
  • Cat LINK Technologies: VisionLink® enables owners to access data wirelessly to monitor machine health, utilization and location.
  • Cat DETECT Technologies: Integrated rear vision camera enhances visibility behind machine to help operators work safely. Optional Cat Rear Object Detection increases operator awareness of the working environment which enhances site safety.
  • Cat PAYLOAD Technologies: Optional Cat Production Measurement 2.0 brings simple and accurate on-the-go payload scale allowing operators to deliver exact loads and work more efficiently. Advanced Productivity subscription provides comprehensive actionable information to help you manage and improve the productivity and profitability of your operations.

Attachments

News & Events

View the latest company and product news, events and customer stories.

Promotions

View the latest offers available on a range of Cat® equipment and genuine parts.

Social Media

Connect with us to learn more about our company, products, services and customers.

Branch Locations

With branches across the UK & Ireland, you can be sure that we’re never far away.

Services

Effectively manage your equipment to reduce operating costs and improve efficiency.

Technology

Integrated technology can help you understand your equipment's output and help extend its lifespan.

Finance

Quick and easy financing with customised payment plans through Cat Financial.

Please share your feedback on Finning.com!

Close window

We are committed to providing you with the best site experience possible.  Please take our brief survey to tell us how we are doing.

Thank you in advance for your time!