Menu

926M Waste Handler

926M Waste Handler Standard Equipment

POWER TRAIN

  • Axle seal guards
  • Auto idle shut down feature
  • Cat C7.1 ACERT engine:
    – Power Modes (Standard and Performance)
    – Power by Range (High Power in Range 4)
    – Turbocharged and aftercooled
    – Filtered crankcase breather
    – Diesel particulate filter (Fit for Life)
  • Coolant protection to –34° C (–29° F)
  • Differential lock in front axle
  • Dry type air cleaner
  • Enclosed wet disc full hydraulic brakes
  • Fuel priming pump, automatic
  • Fuel water separator
  • Hydraulically driven demand cooling fan
  • Intelligent hydrostatic transmission:
    – Power train modes
    – Directional shift aggressiveness
    – Rimpull control, adjust wheel torque
    – Creeper control, adjust ground speed
  • Lubed for life driveshafts
  • Parking brake, electric
  • Wide spaced six fins per inch cooling package
  • S·O·SSM sampling ports
  • Throttle lock and maximum speed limiter

HYDRAULICS

  • Automatic lift, lower and tilt kickouts
  • Bucket and Fork Modes, adjustable in-cab
  • Cylinder damping at kickout and end stops
  • Fine Mode control in Fork Mode
  • Hydraulic response setting
  • Load sensing hydraulics and steering
  • Seat-mounted hydraulic joystick controls

ELECTRICAL

  • Alternator, 115-amp, heavy duty
  • 12V power supply in cab (2)
  • Batteries, 1,000 CCA (2) 24 volt system
  • Back-up alarm
  • Emergency shutdown switch
  • Heavy duty gear reduction starter
  • Product Link PRO with trial subscription
  • Remote jump start post
  • Resettable main and critical function breakers

OPERATOR ENVIRONMENT

  • 75 mm (3 in) retractable seat belt, with audible alarm and indicator
  • Automatic temperature control
  • Binder storage net
  • Cab, enclosed and pressurized
  • Cup holders
  • External heated mirrors with lower parabolic
  • Ground level cab door release
  • Gauges:
    – Digital hour meter, odometer, tachometer, ground speed and direction indicator
    – Engine coolant temperature gauge
    – Fuel and Diesel Exhaust Fluid level
    – Hydraulic oil temperature gauge
  • Hydraulic control lockout
  • Interior cab lighting, door and dome
  • Interior rearview mirrors (2)
  • Lunch box storage
  • Operator warning system indicators
  • Radio ready speakers
  • Rear window defrost, electric
  • Seat-mounted controls, adjustable
  • Sliding glass on the side windows
  • Column mounted multi function control – lights, wipers, turn signal
  • Suspension seat, fabric
  • Tilt and telescopic steering wheel
  • Wet arm wiper/washer, front and rear

OTHER STANDARD EQUIPMENT

  • Large-access enclosure doors
  • Parallel lift loader linkage
  • Recovery hitch with pin
  • Remote mounted lubrication points
  • Lockable compartments and enclosures

EU STANDARD EQUIPMENT

  • Cab, deluxe
  • Camera, rearview

926M Waste Handler Optional Equipment

OPTIONAL EQUIPMENT

  • Antifreeze/coolant, extended-life
  • Auto lube, integrated in touch screen display
  • Auxiliary flow, third and fourth function
  • Axles, differential, limited slip, rear
  • Axles, elevated breathers
  • Beacon light, strobe
  • Cab, deluxe (standard in Europe):
    – Automatic blower control
    – Electrically adjustable heated mirrors (2)
    – LED interior lighting
    – Touch screen display
  • Ride control adjustable speed activation
  • Preventative maintenance reminders
  • Integrated help function (22 languages available)
  • Sunscreen, front and rear
  • Camera, rearview (standard in Europe)
  • Cat Production Measurement (CPM) – fully integrated scale system, with optional printer that can print up to three copies of the weigh ticket
  • Cold start package:
    – Ether starting aid, block heater and additional batteries 1,000 CCA (four in total)
  • Coupler, (Fusion and ISO 23727)
  • Debris packages:
    – Low – standard six fins per inch package
    – Medium – reversing fan and Syklone precleaner
    – High – adds a sealed alternator to medium package
  • Fenders (extended cover and full coverage)
  • Guards:
    – Power train, (lower, side, driveshaft and crankcase)
    – Windshield and lights
    – Cylinders, tilt and steering
  • Lights, auxiliary, halogen or LED with engine compartment lights
  • Rear Object Detection
  • Radio packages:
    – Radio ready with Bluetooth
    – Radio, AM/FM with Bluetooth and clock
    – Radio, AM/FM with CD player deluxe, weatherband, Bluetooth and clock
  • Seats:
    – Deluxe seat – fully adjustable fabric air suspension seat with high seat backrest
    – Premium seat – fully adjustable leather and fabric air suspension with high backrest and air lumbar support. Heated and cooled bottom cushion and backrest.
  • Steering:
    – Dual mode and Secondary
  • Tires:
    – Bias ply, 17.5, 20.5-25
    – Radial, 17.5, 20.5, 23.5, 550/65, 600/65, 650/65 R25
  • Tire Pressure Monitoring (TPM) – fully integrated system with high and low pressure alerts
  • Toolbox – 0.03 m3 (1.2 ft3) of undercab storage
  • Work tools

Select Units

Overview

The Cat 926M Waste Handler sets a new standard for productivity, fuel efficiency and comfort. A high torque, low speed C7.1 ACERT engine works in concert with an intelligent hystat power train to deliver fuel efficiency as standard. A complete range of guarding and debris management solutions are available to meet the needs of the most demanding environments. Extremely low sound levels, large spacious cab and intuitive controls keep you working comfortably all day and even all night! Experience the new industry benchmark.

Engine

  • Maximum Gross Power 153.0 HP 114.0 kW
  • Bore 4.0 in 105.0 mm
  • Stroke 5.0 in 135.0 mm
  • Displacement 427.0 in³ 7.01 l
  • Engine Model Cat® C7.1 ACERT™ Cat® C7.1 ACERT™
  • Maximum Rated Gross Power - ISO 14396 153.0 HP 114.0 kW
  • Maximum Rated Gross Power - ISO 14396 (DIN) 155.0 HP 114.0 kW
  • Maximum Rated Gross Power - ISO 14396 (DIN) (Performance [HP+] Power Mode: Range 1-4) 155.0 HP 114.0 kW
  • Maximum Rated Gross Power - ISO 14396 (Performance [HP+] Power Mode: Range 1-4) 153.0 HP 114.0 kW
  • Maximum Rated Gross Power - Maximum Engine Speed (Performance [HP+] Power Mode: Range 1-4) 1800.0 r/min 1800.0 r/min
  • Rated Net Power - 1,800 rpm - ISO 9249 (1977)/EEC 80/1269 at Minimum Fan Speed (Performance [HP+] Power Mode: Range 1-4) 149.0 HP 111.0 kW
  • Rated Net Power - 1,800 rpm - SAE J1349 at Minimum Fan Speed (Performance [HP+] Power Mode: Range 1-4) 148.0 HP 110.0 kW
  • Emissions Engine meets U.S. EPA Tier 4 Final/EU Stage IV emission standards. Engine meets U.S. EPA Tier 4 Final/EU Stage IV emission standards.
  • Maximum Gross Torque - ISO 14396 (Performance [HP+] Power Mode: Range 1-4) 531.0 ft·lbf 721.0 N·m
  • Maximum Gross Torque - ISO 14396 (Standard Power Mode: Range 1-3*) 531.0 ft·lbf 721.0 N·m
  • Maximum Net Torque - ISO 9249 (1977)/EEC 80/1269 (Performance [HP+] Power Mode: Range 1-4) 517.0 ft·lbf 702.0 N·m
  • Maximum Net Torque - ISO 9249 (1977)/EEC 80/1269 (Standard Power Mode: Range 1-3*) 517.0 ft·lbf 702.0 N·m
  • Maximum Net Torque - SAE J1349 (Performance [HP+] Power Mode: Range 1-4) 511.0 ft·lbf 694.0 N·m
  • Maximum Net Torque - SAE J1349 (Standard Power Mode: Range 1-3*) 511.0 ft·lbf 694.0 N·m
  • Maximum Rated Gross Power - ISO 14396 (DIN) (Standard Power Mode: Range 1-3*) 148.0 HP 109.0 kW
  • Maximum Rated Gross Power - ISO 14396 (Standard Power Mode: Range 1-3*) 146.0 HP 109.0 kW
  • Maximum Rated Gross Power - Maximum Engine Speed (Standard Power Mode: Range 1-3*) 1600.0 r/min 1600.0 r/min
  • Note (1) *Range 4 power and torque is equal to Performance Mode with Caterpillar Power by Range technology. *Range 4 power and torque is equal to Performance Mode with Caterpillar Power by Range technology.
  • Note (2) Net power ratings are tested at the reference conditions for the specified standard and denote power available at the flywheel when the engine is equipped with alternator, air cleaner, emission components and fan at specified speed. Net power ratings are tested at the reference conditions for the specified standard and denote power available at the flywheel when the engine is equipped with alternator, air cleaner, emission components and fan at specified speed.
  • Note (3) No derating required up to 3000 m (10,000 ft) altitude. Auto derate protects hydraulic and transmission systems. No derating required up to 3000 m (10,000 ft) altitude. Auto derate protects hydraulic and transmission systems.
  • Note (4) Spark arrester performance as standard – Meets the performance requirements of EN 1834-1.2000 (section 6.4.2 Visual Test). Spark arrester performance as standard – Meets the performance requirements of EN 1834-1.2000 (section 6.4.2 Visual Test).
  • Rated Net Power - 1,600 rpm - ISO 9249 (1977)/EEC 80/1269 at Minimum Fan Speed (Standard Power Mode: Range 1-3*) 142.0 HP 106.0 kW
  • Rated Net Power - 1,600 rpm - ISO 9249 (DIN) at Minimum Fan Speed (Standard Power Mode: Range 1-3*) 144.0 HP 106.0 kW
  • Rated Net Power - 1,600 rpm - SAE J1349 at Minimum Fan Speed (Standard Power Mode: Range 1-3*) 141.0 HP 105.0 kW
  • Rated Net Power - 1,800 rpm - ISO 9249 (DIN) at Minimum Fan Speed (Performance [HP+] Power Mode: Range 1-4) 151.0 HP 111.0 kW

Buckets

  • Bucket Capacities 3.0-5.0 m3 (3.9-6.5 yd3) 3.0-5.0 m3 (3.9-6.5 yd3)

Weights

  • Operating Weight 31240.0 lb 14175.0 kg

Cab

  • ROPS ISO 3471: 2008 ISO 3471: 2008
  • FOPS ISO 3449: 2005 LEVEL II ISO 3449: 2005 LEVEL II
  • Declared Sound Levels - Exterior Sound Power Level (ISO 6395:2008)* 101.0 dB(A) 101.0 dB(A)
  • Declared Sound Levels - Operator Sound Pressure Level (ISO 6396:2008)* 68.0 dB(A) 68.0 dB(A)
  • Note (1) *Measurements were conducted at 70% of maximum engine cooling fan speed. Sound level may vary at different engine cooling fan speeds. The cab was properly installed and maintained. The measurements were conducted with the cab doors and the cab windows closed. *Measurements were conducted at 70% of maximum engine cooling fan speed. Sound level may vary at different engine cooling fan speeds. The cab was properly installed and maintained. The measurements were conducted with the cab doors and the cab windows closed.
  • Note (2) The Blue Angel environmental label is an optional attachment for Europe only. The Blue Angel environmental label is an optional attachment for Europe only.

Loader Hydraulic System

  • Cycle Times - Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm - Dump (at Maximum Lift Height) 1.5/1.7 seconds 1.5/1.7 seconds
  • Cycle Times - Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm - Float Down (Maximum Lift to Ground Level) 2.6/2.6 seconds 2.6/2.6 seconds
  • Cycle Times - Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm - Raise (Ground Level to Maximum Lift) 5.5/6.2 seconds 5.5/6.2 seconds
  • Cycle Times - Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm - Total Cycle Time 9.6/10.5 seconds 9.6/10.5 seconds
  • Lift Cylinder, Double Acting - Bore Diameter 4.3 in 110.0 mm
  • Lift Cylinder, Double Acting - Rod Diameter 2.4 in 60.0 mm
  • Lift Cylinder, Double Acting - Stroke 28.7 in 728.0 mm
  • Maximum Flow - Implement Pump 40.0 gal/min 150.0 l/min
  • Maximum Flow - Implement Pump - 3rd Function* 40.0 gal/min 150.0 l/min
  • Maximum Working Pressure - Implement Pump 3771.0 psi 26000.0 kPa
  • Note (1) Implement system uses a dedicated load sensing variable displacement pump with dual double acting lift cylinders and a single double acting tilt cylinder. Implement system uses a dedicated load sensing variable displacement pump with dual double acting lift cylinders and a single double acting tilt cylinder.
  • Note (2) Flow values listed are for a machine running in Performance Power Mode (1,800 rpm). Flow values listed are for a machine running in Performance Power Mode (1,800 rpm).
  • Note (3) *3rd function flow is fully adjustable from 20% to 100% of maximum flow through the touch screen display when equipped. *3rd function flow is fully adjustable from 20% to 100% of maximum flow through the touch screen display when equipped.
  • Relief Pressure - Tilt Cylinder 4061.0 psi 28000.0 kPa
  • Relief Pressure - Tilt Cylinder - 3rd Function Maximum Working Pressure 3771.0 psi 26000.0 kPa
  • Relief Pressure - Tilt Cylinder - 3rd Function Relief Pressure 4061.0 psi 28000.0 kPa
  • Tilt Cylinder, Double Acting - Bore Diameter 5.1 in 130.0 mm
  • Tilt Cylinder, Double Acting - Rod Diameter 2.8 in 70.0 mm
  • Tilt Cylinder, Double Acting - Stroke 21.9 in 555.0 mm

Operating Specifications

  • Full Turn Tip Load 16257.0 lb 7376.0 kg

Power Train

  • Brakes - Parking Spring applied hydraulically released Spring applied hydraulically released
  • Brakes - Service Inboard wet disc Inboard wet disc
  • Front Axle Fixed Fixed
  • Front Axle - Traction Aid* Locking differential (standard) Locking differential (standard)
  • Note (1) Power train is governed by the Caterpillar exclusive Intelligent Power Management system to deliver peak performance and efficiency. Power train is governed by the Caterpillar exclusive Intelligent Power Management system to deliver peak performance and efficiency.
  • Note (2) Offset rims available to meet European roading requirements. Offset rims available to meet European roading requirements.
  • Note (3) *Differential front locking axle can be engaged on the go at full torque to 10 km/h (6.2 mph) on the 926M. *Differential front locking axle can be engaged on the go at full torque to 10 km/h (6.2 mph) on the 926M.
  • Rear Axle Oscillating Oscillating
  • Rear Axle - Oscillation Angle by Tire Size - 17.5 R25 ± 13.5 degrees ± 13.5 degrees
  • Rear Axle - Oscillation Angle by Tire Size - 20.5 R25, 550/65, 600/65, 650/65 ± 10.5 degrees ± 10.5 degrees
  • Rear Axle - Traction Aid - Optional Limited slip differential Limited slip differential

Service Refill Capacities

  • Cooling System 7.9 gal (US) 30.0 l
  • Diesel Exhaust Fluid (DEF) Tank 5.0 gal (US) 19.0 l
  • Engine Crankcase 5.3 gal (US) 20.0 l
  • Front Axles 5.5 gal (US) 21.0 l
  • Fuel Tank 51.5 gal (US) 195.0 l
  • Hydraulic System - Including Tank 42.3 gal (US) 160.0 l
  • Hydraulic Tank 23.8 gal (US) 90.0 l
  • Rear Axles 5.5 gal (US) 21.0 l
  • Transmission - Gear Box 2.2 gal (US) 8.5 l

Steering

  • Maximum Flow - Steering Pump 34.0 gal/min 130.0 l/min
  • Maximum Steering Torque - 0° (Straight Machine) 37155.0 ft·lbf 50375.0 N·m
  • Maximum Steering Torque - 40° (Full Turn) 27747.0 ft·lbf 37620.0 N·m
  • Maximum Working Pressure - Steering Pump 3500.0 psi 24130.0 kPa
  • Note (1) Steering system uses a dedicated load sensing variable displacement pump with dual double acting cylinders. Steering system uses a dedicated load sensing variable displacement pump with dual double acting cylinders.
  • Note (2) Flow values listed are for a machine running in Performance Power Mode (1,800 rpm). Flow values listed are for a machine running in Performance Power Mode (1,800 rpm).
  • Steering Cycle Times - Full Left to Full Right - Maximum RPM: 90 rpm Steering Wheel Speed 2.4 s 2.4 s
  • Steering Cycle Times - Full Left to Full Right - Minimum RPM: Pump Flow Limited 2.8 s 2.8 s
  • Steering Cylinder, Double Acting - Bore Diameter 2.8 in 70.0 mm
  • Steering Cylinder, Double Acting - Rod Diameter 1.6 in 40.0 mm
  • Steering Cylinder, Double Acting - Stroke 17.2 in 438.0 mm

Transmission

  • Forward and Reverse - Range 1* 1-13 km/h (0.6-8 mph) 1-13 km/h (0.6-8 mph)
  • Forward and Reverse - Range 2 8.0 mile/h 13.0 km/h
  • Forward and Reverse - Range 3 17.0 mile/h 27.0 km/h
  • Forward and Reverse - Range 4 25.0 mile/h 40.0 km/h
  • Note *Creeper control allows maximum speed range adjustability from 1 km/h (0.6 mph) to 13 km/h (8 mph) in Range 1 through the touch screen display when equipped. Factory default is 7 km/h (4.4 mph). *Creeper control allows maximum speed range adjustability from 1 km/h (0.6 mph) to 13 km/h (8 mph) in Range 1 through the touch screen display when equipped. Factory default is 7 km/h (4.4 mph).

Application Specific Configuration

Customize Your Experience

Efficiently Powerful

Work Made Easy

Enjoy All Day Comfort

Configured for Success

Serviceability

Customer Support

News & Events

View the latest company and product news, events and customer stories.

Default Offer

View the latest offers available on a range of Cat® equipment and genuine parts.

Social Media

Connect with us to learn more about our company, products, services and customers.

Branch Locations

With branches across the UK & Ireland, you can be sure that we’re never far away.

Services

Effectively manage your equipment to reduce operating costs and improve efficiency.

Technology

Integrated technology can help you understand your equipment's output and help extend its lifespan.

Finance

Quick and easy financing with customised payment plans through Cat Financial.

Please share your feedback on Finning.com!

Close window

We are committed to providing you with the best site experience possible.  Please take our brief survey to tell us how we are doing.

Thank you in advance for your time!