Menu

C18 (60 Hz)

C18 (60 Hz) Standard Equipment

Air Inlet System

  • Light duty air cleaner
  • Aftercooler core
  • Turbocharger

Control System

  • EMCP 4.2

Cooling

  • Radiator and cooling fan with guard
  • Coolant drain line with valve
  • Fan drive, battery charging alternator drive
  • Caterpillar extended life coolant

Exhaust System

  • Stainless steel exhaust flex gaskets, raincap and SAE exhaust flange for customer use; shipped loose

Fuel System

  • Standard 8 hour open set fuel tank

Generator and Attachments

  • Matched to the performance and output characteristics of Cat engines
  • A frame generator - IP21 protection
  • Integrated Voltage Regulator
  • Integrated Voltage Regulator
  • Power center, IP22
  • Segregated low voltage (AC/DC) wiring panel
  • Mandatory Option circuit breaker, IEC, 3 pole, mounted in power centre

Governing System

  • Cat Electronic Governor (ADEM A4)

Lube System

  • Lubricating oil
  • Oil drain valves

Mounting System

  • Captive linear vibration isolators between base and engine-generator. includes lifting provisions and termination points for coolant and lube oil drain lines

Starting/Charging

  • 24 Volt battery with rack and cables

General

  • Engine and alternator pre-paint, Caterpillar yellow

C18 (60 Hz) Optional Equipment

Air Inlet System

  • Single element air cleaner
  • Dual element air cleaner

Circuit Breakers

  • 3 Pole (IEC-100% rated) circuit breakers - Package mounted
  • 4 Pole (IEC-100% rated) circuit breakers - Package mounted
  • 3 Pole (IEC-100% rated) circuit breakers - Motorised
  • 4 Pole (IEC-100% rated) circuit breakers - Motorised
  • Circuit breaker (IEC) auxiliary contacts
  • Shunt trip for IEC breaker
  • Pad-lockable circuit breaker device
  • Power terminal strip

Control System

  • EMCP 4.4
  • Volt free contact
  • Local alarm horn
  • Oil temperature displays
  • Protective devices: Earth fault relay - earth leageage ground fault relay - Overload shutdown via breaker - Low fuel level alarm - Low fuel level shutdown - high fuel level alarm - Fuel level sensor
  • Local alarm modules
  • Remote annunciator modules

Cooling System

  • Radiator duct flange
  • Low coolant temperature alarm

Enclosures

  • Sound attenuated enclosures

Exhaust System

  • Engine mounted muffler
  • 10, 25 and 35 end in / end out Mufflers
  • 8 and 10 inch GP flanges
  • 8 and 10 inch elbow kits
  • Manifold and Turbocharger guard

Fuel System

  • Integral - Duel wall fuel tank base
  • Manual fuel transfer pump
  • Fuel transfer system

Generator and Attachments

  • Ingress protection
  • Permanent magnet excitation
  • Space heaters
  • A frame oversize generator
  • A frame CIP generator
  • LC frame generator
  • LC frame oversize generators
  • LC frame CIP generator

Lube System

  • Manual sump pump

Starting and Charging

  • 5 Amp battery charger
  • Battery disconnect switch
  • Jacket water heaters

Select Units

Overview

Producing reliable power from 455 ekW to 600 ekW at 60 Hz, our C18 ACERT® diesel generator sets are made to meet your standby and prime applications. Each is designed to ISO 8528-5 transient response requirements and built accept 100 percent rated load in one step. Our C18 generator sets range from low fuel consumption systems to EPA Stationary Emergency (Tier 2) certified. Seismic certification is also available for select models, so you can deliver power despite disturbances. Our integrated control system, including ATS and switchgear ensure a consistent power supply and connection to your fleet through on-site and remote monitoring options. We offer a wide range of EMCP 4 control panel options, with a simple screen display, consolidating all your management and diagnostics tools. The EMCP 4.4 controller provides on package paralleling capability, allowing you to use multiple generator sets to power your facility, providing added capacity and redundancy. We've made our generator sets adaptable to your demands with a broad range of accessories and bolt-on system expansion attachments. Find flexible packaging to fit your spatial restrictions and environmental conditions. Even choose UL 2200 and CSA certified package options for added safety.

Generator Set Specifications

  • Minimum Rating 455 ekW 455 ekW
  • Maximum Rating 600 ekW 600 ekW
  • Voltage 208 to 600 Volts 208 to 600 Volts
  • Frequency 60 Hz 60 Hz
  • Speed 1800 RPM 1800 RPM

Generator Set Configurations

  • Emissions/Fuel Strategy U.S. EPA Certified for Stationary Emergency Use Only (Tier 2 Nonroad Equivalent Emission Standards) U.S. EPA Certified for Stationary Emergency Use Only (Tier 2 Nonroad Equivalent Emission Standards)

Engine Specifications

  • Engine Model C18 ATAAC, I-6, 4-Stroke Water-Cooled Diesel C18 ATAAC, I-6, 4-Stroke Water-Cooled Diesel
  • Bore 145 mm (5.71 in) 145 mm (5.71 in)
  • Displacement 18.13 L (1106.36 in3) 18.13 L (1106.36 in3)
  • Stroke 183 mm (7.2 in) 183 mm (7.2 in)
  • Compression Ratio 14.5:1 14.5:1
  • Aspiration Air to Air Aftercooled Air to Air Aftercooled
  • Governor Type Adem™A4 Adem™A4
  • Fuel System Electronic unit injection Electronic unit injection

Cat Diesel Engine

  • Reliable, rugged, durable design
  • Field-proven in thousands of applications worldwide
  • Four-stroke-cycle diesel engine combines consistent performance and excellent fuel economy with minimum weight
  • Generator

  • Matched to the performance and output characteristics of Cat engines
  • Industry leading mechanical and electrical design
  • Industry leading motor starting capabilities
  • High Efficiency
  • Cat EMCP Control Panel

    The EMCP controller features the reliability and durability you have come to expect from your Cat equipment. EMCP4 is a scalable control platform designed to ensure reliable generator set operation, providing extensive information about power output and engine operation. EMCP4 systems can be further customized to meet your needs through programming and expansion modules.

    Single-Source Supplier

    Fully prototype tested with certified torsional vibration analysis available

    World Wide Product Support

    Cat dealers provide extensive post-sale support including maintenance and repair agreements. Cat dealers have over 1,800 dealer branch stores operating in 200 countries. The Caterpillar S•O•S℠ program cost effectively detects internal engine component condition, even the presence of unwanted fluids and combustion by-products

    Seismic Certification

  • Seismic Certification available.
  • Anchoring details are site specific, and are dependent on many factors such as generator set size, weight, and concrete strength.
  • IBC Certification requires that the anchoring system used is reviewed and approved by a Professional Engineer
  • Seismic Certification per Applicable Building Codes: IBC 2000, IBC 2003, IBC 2006, IBC 2009, CBC 2007, CBC 2010
  • Pre-approved by OSHPD and carries an OSP-0321-10 for use in healthcare projects in California
  • UL 2200 / CSA - Optional

  • UL 2200 listed packages
  • CSA Certified
  • Certain restrictions may apply.
  • Consult with your Cat® Dealer.
  • Design Criteria

    The generator set accepts 100% rated load in one step per NFPA 110 and meets ISO 8528-5 transient response.

    News & Events

    View the latest company and product news, events and customer stories.

    Default Offer

    View the latest offers available on a range of Cat® equipment and genuine parts.

    Social Media

    Connect with us to learn more about our company, products, services and customers.

    Branch Locations

    With branches across the UK & Ireland, you can be sure that we’re never far away.

    Services

    Effectively manage your equipment to reduce operating costs and improve efficiency.

    Technology

    Integrated technology can help you understand your equipment's output and help extend its lifespan.

    Finance

    Quick and easy financing with customised payment plans through Cat Financial.

    Please share your feedback on Finning.com!

    Close window

    We are committed to providing you with the best site experience possible.  Please take our brief survey to tell us how we are doing.

    Thank you in advance for your time!