C2.2 Standard Equipment

Control System

  • Alternator 12 volt 85 amp
  • Starter motor 12 volt
  • Glow plug starting aid, delivers heat directly to cylinder for best starting performance in cold weather
  • Electronic control unit - chassis mounted
  • Flexible and configurable software features and well supported SAE J1939 CAN bus enables highly integrated machines
  • Wiring harness connectors and sensors are waterproof and designed to withstand harsh off-highway environments

Flywheels and Flywheel Housing

  • SAE No. 4 standard flywheel housing
  • Choice of flywheel weight and bolting pattern to accommodate a range of industry-standard hydraulic pumps and transmissions

Fuel System

  • 2000 bar high-pressure common rail system
  • Proprietary fuel filters to ensure engine protection through correct service procedures, along with water-in-fuel detection, ensures maximum machine up-time for the operator

Lube System

  • Alternative oil fillers
  • Spin-on lube oil filter

Power Take Off (PTO)

  • SAE A PTO drive


  • Cast iron engine block
  • Cast iron exhaust manifold
  • Gradeability 35° continuous
  • Paint: Cat yellow

U.S. EPA Tier 4 Final, EU Stage IIIB Aftertreatment/Clean Emissions Control Equipment

  • Diesel Oxidation Catalyst (DOC)

Select Units


The new electronic Cat® C2.2 Industrial Diesel Engines, with common rail fuel system, deliver impressive performance throughout a wide speed range with exceptional power density. Ultracompact package size and extensive options make them ideal for agriculture, aerial lifts, compressors, construction, general industrial, irrigation equipment, material handling, mobile earthmoving equipment, mobile light towers, turf and landscaping, underground mining equipment, and welders.

Power Rating

  • Minimum Power 48.8 BHP 36.4 bkW
  • Maximum Power 67.1 BHP 50.0 bkW
  • Rated Speed 2800 rpm 2800 rpm

Emission Standards

  • Emissions U.S. EPA Tier 4 Final, EU Stage IIIB U.S. EPA Tier 4 Final, EU Stage IIIB


  • Engine Configuration In-Line 4, 4-Stroke-Cycle Diesel In-Line 4, 4-Stroke-Cycle Diesel
  • Bore 84 mm (3.3 in) 84 mm (3.3 in)
  • Stroke 100 mm (3.9 in) 100 mm (3.9 in)
  • Displacement 2.2 L (135 in³) 2.2 L (135 in³)
  • Aspiration Turbocharged (T) or Turbocharged-Aftercooled (TA) Turbocharged (T) or Turbocharged-Aftercooled (TA)
  • Compression Ratio 18:1 18:1
  • Combustion System Direct Injection Direct Injection
  • Rotation from Flywheel End Counterclockwise Counterclockwise
  • Cooling System - Capacity 4.3 L (4.5 qt) 4.3 L (4.5 qt)
  • Lube System - Refill 9.3 L (9.8 qt) 9.3 L (9.8 qt)

Engine Dimensions - Approximate

  • Height 736 mm (28.9 in) 736 mm (28.9 in)
  • Length 764 mm (30.07 in) 764 mm (30.07 in)
  • Weight - Net Dry - Basic Operating Engine Without Optional Attachments 230 kg (507 lbs) 230 kg (507 lbs)
  • Width 545 mm (21.5 in) 545 mm (21.5 in)

Aftertreatment Dimensions - Approximate

  • Diameter 155 mm (6.1 in) 155 mm (6.1 in)
  • Length 408.4 mm (16.07 in) 408.4 mm (16.07 in)
  • Weight 5.8 kg (12.79 lb) 5.8 kg (12.79 lb)

Reliable, Quiet and Durable Power

World-class manufacturing capability and processes coupled with proven core engine designs assure reliability, quiet operation, and many hours of productive life.

High Performance

Substantial torque rise delivers impressive performance throughout a wide speed range while maintaining low operating costs.

Fuel Efficiency

Fuel consumption optimized to match operating cycles of a wide range of equipment and applications while maintaining low operating costs.

Broad Application Range

Industry leading ratings and options for compact construction equipment, material handling, and other industrial applications. The engine is designed to require no special training or operation, which makes it particularly suitable for machines that are used in rental fleets.

Package Size

Ultra-compact package size and high power density ensures ease of installation. It also allows machine manufacturers to develop smaller machines, with low weight for transport, tight turning circles for productivity, and good sight lines for safety.

World-class Product Support Offered Through Global Cat Dealer Network

  • Scheduled maintenance, including S•O•S℠ sample
  • Customer Support Agreements (CSA)
  • Caterpillar Extended Service Coverage (ESC)
  • Superior dealer service network
  • Extended dealer service network through the Cat Industrial Service Distributor (ISD) program

News & Events

View the latest company and product news, events and customer stories.


View the latest offers available on a range of Cat® equipment and genuine parts.

Social Media

Connect with us to learn more about our company, products, services and customers.

Branch Locations

With branches across the UK & Ireland, you can be sure that we’re never far away.


Effectively manage your equipment to reduce operating costs and improve efficiency.


Integrated technology can help you understand your equipment's output and help extend its lifespan.


Quick and easy financing with customised payment plans through Cat Financial.

Please share your feedback on!

Close window

We are committed to providing you with the best site experience possible.  Please take our brief survey to tell us how we are doing.

Thank you in advance for your time!