Menu

C3.6

C3.6 Standard Equipment

Control System

  • Starter motor (12V or 24V)
  • Alternator (12V or 24V)
  • Electronic Control Unit (chassis mounted)
  • Engine control sensors and robust wiring harness
  • Data interface via CANbus J1939

Flywheels and Flywheel Housing

  • Flywheel housings – SAE 3 or SAE 4
  • Choice of flywheel to match industry common hydraulic pumps and transmissions
  • Side PTO with SAE A or SAE B interface

Fuel System

  • Fuel filter – preconnected but chassis mounted
  • With water sensor

Lube System

  • Lubricating oil filters
  • High incline oil pan – 35° continuous in all directions

General

  • Cold start capability to -20° C (-4° F) with standard equipment
  • Paint: Caterpillar yellow, with optional colors available at request

U.S. EPA Tier 4 Final, proposed EU Stage V Aftertreatment/ Clean Emissions Control Equipment

  • Diesel Oxidation Catalyst (DOC)
  • Selective Catalytic Reduction (SCR)
  • SCR Auxiliaries

Select Units

Overview

The Cat® C3.6 Industrial Diesel Engines offer the perfect balance of compact size, reliability, and performance. This engine is offered in ratings ranging up to 100 bkW (134 bhp) @ 2200 rpm. The C3.6 is designed to meet the needs of many industries and applications, including agricultural tractors, aircraft ground support, bore/drill rigs, chippers/grinders, compactors/rollers, compressors, forestry, irrigation equipment, material handling, mining, earthmoving equipment, paving equipment, pumps, fruit harvesters equipment, turf and underground mining equipment.

Power Rating

  • Minimum Power 74.0 BHP 55.0 bkW
  • Maximum Power 134.0 BHP 100.0 bkW
  • Rated Speed 2000-2400 rpm 2000-2400 rpm

Emission Standards

  • Emissions U.S. EPA Tier 4 Final Nonroad Emission Standards. Also designed to meet proposed EU Stage V Nonroad Emission Standards. U.S. EPA Tier 4 Final Nonroad Emission Standards. Also designed to meet proposed EU Stage V Nonroad Emission Standards.

General

  • Engine Configuration In-Line 4, 4-Stroke-Cycle Diesel In-Line 4, 4-Stroke-Cycle Diesel
  • Bore 98 mm (3.9 in) 98 mm (3.9 in)
  • Stroke 120 mm (4.7 in) 120 mm (4.7 in)
  • Displacement 3.6 L (220 in³) 3.6 L (220 in³)
  • Aspiration Turbocharged-Aftercooled (TA) Turbocharged-Aftercooled (TA)
  • Compression Ratio 17:1 17:1
  • Combustion System Direct Injection Direct Injection
  • Rotation from Flywheel End Counterclockwise Counterclockwise
  • Cooling System - Capacity 4 L (1.06 qt) 4 L (1.06 qt)

Aftertreatment Dimensions - Approximate

  • DOC Diameter TBA TBA
  • DOC Length TBA TBA
  • DOC Weight TBA TBA
  • SCR Diameter TBA TBA
  • SCR Length TBA TBA
  • SCR Weight TBA TBA

Engine Dimensions - Approximate

  • Dry Weight - Basic Operating Engine Without Optional Attachments 275 kg (606 lbs) 275 kg (606 lbs)
  • Height 776 mm (30.6 in) 776 mm (30.6 in)
  • Length 667 mm (26.3 in) 667 mm (26.3 in)
  • Width 569 mm (22.4 in) 569 mm (22.4 in)

Emissions

Meets U.S. EPA Tier 4 Final Nonroad emission standards. Designed to meet proposed EU Stage V Nonroad emission standards. As of publishing date, Stage V regulations have not been finalized.

Reliable, Quiet and Durable Power

World-class manufacturing capability and processes coupled with proven technologies and extensive field validation assure reliability and durability in tough nonroad applications.

High Performance

Leading edge fuel systems and turbocharging provide high torque even at lower engine speeds.

Fuel Efficiency

Fuel consumption optimized to match the measured operating cycles of a wide range of equipment types.

Fuel & Oil

U.S. EPA Tier 4 Interim or Tier 4 Final, EU Stage IIIB, Stage IV or proposed Stage V engines require Ultra Low Sulfur Diesel (ULSD) fuel containing a maximum of 10 ppm sulfur (EU) and 15 ppm sulfur (U.S.), and new oil formulations to support the new technology. Your Cat dealer can provide more information regarding fuel and oil.

Broad Application Range

Industry-leading range of factory configurable ratings and options for agricultural, material handling, construction, mining, aircraft ground support, and other industrial applications.

Low Cost Maintenance

Worldwide service delivers ease of maintenance and simplifies the servicing routine. Capable of optimal oil change intervals of 500 hours. The S•O•S℠ program is available from your Cat dealer to determine oil change intervals and provide optimal performance.

Quality

Every Cat engine is manufactured to stringent quality standards in order to assure customer satisfaction.

World-class Product Support Offered Through Global Cat Dealer Network

  • Scheduled maintenance, including SOS℠ sample
  • Customer Support Agreements (CSA)
  • Extended Service Coverage (ESC)
  • Superior dealer service network
  • Extended dealer service network through the Cat Industrial Service Distributor (ISD) program

U.S. EPA Tier 4 Final, Proposed EU Stage V Aftertreatment Features

Technology – The DOC, DPF and SCR technology provides customers with a solution which meets the emissions standards while providing optimal fuel consumption and transient response. For power ratings below 56 bkW (75 bhp), the SCR is not required. Mounting – On engine aftertreatment offered for best value and simplest OEM design and manufacturing processes. Remote mount alternatives are also available.

News & Events

View the latest company and product news, events and customer stories.

Promotions

View the latest offers available on a range of Cat® equipment and genuine parts.

Social Media

Connect with us to learn more about our company, products, services and customers.

Branch Locations

With branches across the UK & Ireland, you can be sure that we’re never far away.

Services

Effectively manage your equipment to reduce operating costs and improve efficiency.

Technology

Integrated technology can help you understand your equipment's output and help extend its lifespan.

Finance

Quick and easy financing with customised payment plans through Cat Financial.

Please share your feedback on Finning.com!

Close window

We are committed to providing you with the best site experience possible.  Please take our brief survey to tell us how we are doing.

Thank you in advance for your time!