930M Wheel Loader | Finning CAT

Equipment

930M Standard Equipment

POWER TRAIN

Axle seal guards
Auto idle shut down feature
Cat C7.1 ACERT engine
– Power Modes (Standard and Performance)
– Power by Range (High Power in Range 4)
– Turbocharged and aftercooled
– Diesel particulate filter (Fit for Life)
Coolant protection to –34° C (–29° F)
Differential lock in front axle
Dry type air cleaner
Enclosed wet disc full hydraulic brakes
Fuel priming pump, automatic
Fuel water separator
Hydraulically driven demand cooling fan
Intelligent hydrostatic transmission
– Power train modes
– Directional shift aggressiveness
– Rimpull control, adjust wheel torque
– Creeper control, adjust ground speed
Lubed for life driveshafts
Parking brake, electric
Wide spaced 6 fins per inch cooling package
S·O·SSM sampling ports
Throttle lock and maximum speed limiter

HYDRAULICS

Automatic lift, lower and tilt kickouts
Bucket and Fork Modes, adjustable in-cab
Cylinder damping at kickout and end stops
Fine Mode control in Fork Mode
Hydraulic Response setting
Load sensing hydraulics and steering
Seat-mounted hydraulic joystick controls

ELECTRICAL

OPERATOR ENVIRONMENT

75 mm (3 in) retractable seat belt, with audible alarm and indicator
Automatic temperature control
Cab, enclosed and pressurized
Cup holders
External heated mirrors with lower parabolic
Ground level cab door release
Gauges
– Digital hour, odometer, tachometer, ground speed and direction indicator
– Engine coolant temperature gauge
– Fuel and Diesel Exhaust Fluid level
– Hydraulic oil temperature gauge
Hydraulic control lockout
Interior cab lighting, door and dome
Interior rearview mirrors (2)
Lunch box storage
Operator warning system indicators
Radio ready speakers
Rear window defrost, electric
Seat-mounted controls, adjustable
Sliding glass on the side windows
Column mounted multi function control – lights, wipers, turn signal
Suspension seat, fabric
Tilt and telescopic steering wheel
Wet arm wiper/washer, front and rear

OTHER STANDARD EQUIPMENT

Large-access enclosure doors
Parallel lift loader linkage
Recovery hitch with pin
Remote mounted lubrication points
Lockable compartments and enclosures

930M Optional Equipment

OPTIONAL EQUIPMENT

Antifreeze/coolant, extended-life
Auto lube, integrated in secondary display
Auxiliary flow, third and fourth function
Axles, differential, limited slip, rear
Beacon light, strobe
Cab, deluxe (standard in Europe):
– Automatic blower control
– Electrically adjustable heated mirrors (2)
– LED interior lighting
– Touchscreen secondary display
Ride control adjustable speed activation
Preventative maintenance reminders
Integrated help function (26 languages)
Sunscreen, front and rear
Camera, rearview (standard in Europe)
Cold start package:
– Ether starting aid, block heater and additional batteries, 1,000 CCA (4 total)
Counterweight, (heavy and logger)
Coupler, (Fusion and ISO 23727)
Debris packages (low, medium, high)
Fenders (extended cover and full coverage)
Guards
– Power train, (lower, side, driveshaft and crankcase)
– Windshield and lights
– Cylinders, tilt and steering
– Rear radiator, heavy duty
Linkage, high lift
Lights, auxiliary, halogen or LED with engine compartment lights
Payload Technology
– Cat Production Measurement (CPM)
– CPM Printer
Rear Object Detection
Radio packages:
– Radio ready with Bluetooth
– Radio, AM/FM with Bluetooth and clock
– Radio, AM/FM with CD player deluxe, weatherband, Bluetooth and clock
Seats:
– Deluxe seat – fully adjustable fabric air suspension seat with mid seat backrest
– Premium seat – fully adjustable leather and fabric air suspension with high backrest and air lumbar support. Heated and cooled bottom cushion and backrest.
Steering:
– Dual mode and Secondary
Tires:
– Bias ply, 17.5, 20.5-25, Skidder
– Radial, 17.5, 20.5, 23.5, 550/65, 600/65, 650/65 R25
– Solid tires, 620/65, 750/65 Agriculture
Tire Pressure Monitoring (TPM)
Toolbox
Work tools

Overview

The Cat 930M Small Wheel Loader sets the standard for productivity, fuel efficiency and operator comfort. The improved optimized Z-bar loader linkage delivers the quick loading performance of a traditional Z-bar with the parallelism and load handling capability of a tool carrier. A high torque, low speed C7.1 ACERT engine works in concert with an intelligent hystat power train to deliver fuel efficiency as standard. Meets Tier 4 Final/Stage IV emission standards with an environmentally friendly, Clean Emission Module designed to manage itself so you can concentrate on your work. Experience the new industry benchmark.

Engine

Buckets

Bucket Capacities 2.1-5.0 m3 (2.7-6.5 yd3) 2.1-5.0 m3 (2.7-6.5 yd3)

Weights

Operating Weight 30879.0 lb 14007.0 kg

Cab

ROPS ISO 3471: 2008 ISO 3471: 2008
FOPS ISO 3449: 2005 LEVEL II ISO 3449: 2005 LEVEL II
Note (1) Declared sound levels per ISO 6396:2008* while in Performance Power Mode: – Standard cab: 68 ±3 dB(A) and Deluxe cab Declared sound levels per ISO 6396:2008* while in Performance Power Mode: – Standard cab: 68 ±3 dB(A) and Deluxe cab
Note (2) * Measurements were conducted with cab doors and windows closed and at 70% of maximum engine cooling fan speed. Sound level may vary at different engine cooling fan speeds. * Measurements were conducted with cab doors and windows closed and at 70% of maximum engine cooling fan speed. Sound level may vary at different engine cooling fan speeds.

Air Conditioning System

Air Conditioning The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential – 1430). The system contains 1.9 kg of refrigerant which has a CO2 equivalent of 2.717 metric tonnes. The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential – 1430). The system contains 1.9 kg of refrigerant which has a CO2 equivalent of 2.717 metric tonnes.

Loader Hydraulic System

Operating Specifications

Full Turn Tip Load 18670.0 lb 8469.0 kg

Power Train

Brakes - Parking Spring applied hydraulically released Spring applied hydraulically released
Brakes - Service Inboard wet disc Inboard wet disc
Front Axle Fixed Fixed
Front Axle - Traction Aid - Standard Locking differential Locking differential
Note (1) Power train is governed by the Caterpillar exclusive Intelligent Power Management system to deliver peak performance and efficiency. Power train is governed by the Caterpillar exclusive Intelligent Power Management system to deliver peak performance and efficiency.
Note (2) Differential front locking axle can be engaged on the go at full torque to 10 km/h (6.2 mph) on the 930M. Differential front locking axle can be engaged on the go at full torque to 10 km/h (6.2 mph) on the 930M.
Rear Axle Oscillating Oscillating
Rear Axle - Oscillation Angle by Tire Size - 20.5 R25, 550/65, 600/65, 650/65 ± 10.5 degrees ± 10.5 degrees
Rear Axle - Oscillation Angle by Tire Size - Solid Tires, 750/65, 620/65, Skidder ± 7 degrees ± 7 degrees
Rear Axle - Traction Aid - Optional Limited slip differential Limited slip differential

Service Refill Capacities

Cooling System 7.9 gal (US) 30.0 l
Diesel Exhaust Fluid (DEF) Tank 5.0 gal (US) 19.0 l
Engine Crankcase 5.3 gal (US) 20.0 l
Front Axles 6.9 gal (US) 26.0 l
Fuel Tank 51.5 gal (US) 195.0 l
Hydraulic System - Including Tank 43.6 gal (US) 165.0 l
Hydraulic Tank 23.8 gal (US) 90.0 l
Rear Axles 6.6 gal (US) 25.0 l
Transmission - Gear Box 2.2 gal (US) 8.5 l

Steering

Maximum Flow - Steering Pump 34.0 gal/min 130.0 l/min
Maximum Steering Torque - 0° (Straight Machine) 37155.0 lb/ft 50375.0 N·m
Maximum Steering Torque - 40° (Full Turn) 27747.0 lb/ft 37620.0 N·m
Maximum Working Pressure - Steering Pump 3500.0 psi 24130.0 kPa
Note (1) Steering system uses a dedicated load sensing variable displacement pump with dual double acting cylinders. Steering system uses a dedicated load sensing variable displacement pump with dual double acting cylinders.
Note (2) Flow values listed are for a machine running in Performance Power Mode (1,800 rpm). Flow values listed are for a machine running in Performance Power Mode (1,800 rpm).
Steering Cycle Times - Full Left to Full Right - Maximum RPM: 90 rpm Steering Wheel Speed 2.4 s 2.4 s
Steering Cycle Times - Full Left to Full Right - Minimum RPM: Pump Flow Limited 2.8 s 2.8 s
Steering Cylinder, Double Acting - Bore Diameter 2.8 in 70.0 mm
Steering Cylinder, Double Acting - Rod Diameter 1.6 in 40.0 mm
Steering Cylinder, Double Acting - Stroke 17.2 in 438.0 mm

Transmission

Forward and Reverse - Range 1* 1-13 km/h (0.6-8 mph) 1-13 km/h (0.6-8 mph)
Forward and Reverse - Range 2 8.0 mile/h 13.0 km/h
Forward and Reverse - Range 3 17.0 mile/h 27.0 km/h
Forward and Reverse - Range 4 25.0 mile/h 40.0 km/h
Note * Creeper control allows maximum speed range adjustability from 1 km/h (0.6 mph) to 13 km/h (8 mph) in Range 1 through the secondary display when equipped. Factory default is 7 km/h (4.4 mph). * Creeper control allows maximum speed range adjustability from 1 km/h (0.6 mph) to 13 km/h (8 mph) in Range 1 through the secondary display when equipped. Factory default is 7 km/h (4.4 mph).

Benefits & Features

Configured for Success

The Way You Want It

A complete range of optional equipment and work tools give you the versatility to configure an M Series wheel loader to be successful in your business. Get with your Cat dealer to configure yours.

Guards:

Windshield
Tilt cylinder
Lights
Fender deflectors
Drive shaft
Hitch
Steering cylinders
Side power train
Lower power train
Crank case
Rear radiator

Debris Packages:

Reversing fan
Sealed alternator
Turbine precleaner
RESPA precleaner

Work Tools:

Full range of attachments

Operator Environment:

Seat, deluxe or premium
Deluxe cab (with touch screen display)

Other Options:

Autolube
High lift linkage
Coupler: Fusion™ and ISO 23727
Auxiliary hydraulics: 3rd and 4th
Window washing access
Ride control
Fenders: extended and full coverage
Counterweights
Cold start package
Rear object detection
Blue Angel certification
Beacon
LED auxiliary lights
CPM – Cat Production Measurement
TPM – Tire Pressure Monitoring

Work Made Easy

Optimized Z-bar Linkage

The Caterpillar patented optimized Z-bar linkage combines the digging efficiency of a traditional Z-bar with integrated tool carrier capabilities for great performance and versatility.

Perfect Parallelism functionality available in Fork Mode gives truly predictable performance while high tilt forces throughout the working range help you safely and confidently handle loads with precise control.
Visibility to bucket corners and fork tips at ground level remain excellent while sight lines at maximum lift are improved with a Generation II lift arm design.
Lift higher and reach further with optional High Lift linkage available on all three models.

Quick Loading Performance Series Buckets

Performance Series Buckets deliver up to 10% higher fill factors compared to previous models, better material retention for significant productivity and fuel efficiency improvements. The buckets feature a longer floor to take a bigger bite of the pile, an open throat to heap higher and curved side bars to help with material retention. This optimized shape is echoed across the General Purpose, Light Material and High Dump bucket families.

Smooth and Predictable Multi-Function Performance

M Series machines feature an electro-hydraulic control system that is governed by the Intelligent Power Management system for peak efficiency. The load-sensing, variable flow system senses work demand and adjusts flow and pressure to match the operators request.

Multi-Function without compromise through dedicated hydraulic systems featuring one pump for the Intelligent Hydrostatic drive, a 2nd pump for the implements, and a 3rd pump for the steering system. Drive, Lift and Steer simultaneously with smooth predictable control. The M Series simply does what you ask it to.
Programmable in-cab kick-outs are easy to set on the go for tilt, lower and lift. This feature is ideal for applications where the work cycle is repeatable, allowing you to quickly return to programmed set points such as ground and level.
Fine tune hydro-mechanical performance with fully adjustable 3rd and 4th function flow through the secondary display (when equipped) for a perfect marriage between machine and work tool.

Service

Get up and running quickly with ground level, daily service access and optional engine compartment lighting. Three large service doors can be opened and closed in any order to give full access to filters and service points. Extended service intervals on hydraulic and power train filters reduce service time and maximize uptime. Additional service features include:

Product Link™ PRO standard with optional subscription to VisionLink®.
Maintenance reminders through secondary display at scheduled intervals.
Fit for Life Diesel Particulate Filter that is designed to exceed the engine overhaul life.
Quick fuel filter service with Caterpillar's exclusive electric fuel priming pump.
Jump start studs as standard equipment.
Extended cleanouts with single plane cooling system and wide spaced 6 fins per inch coolers as standard.
Integrated Autolube (optional) with adjustable greasing frequency.

Enjoy All Day Comfort

Have a Seat and Experience:

Seat-mounted controls featuring a low effort joystick for lift and tilt functions along with integrated Forward/Neutral/Reverse switch, differential lock trigger and optional third and fourth auxiliary functions.
Superior all around visibility with single piece front windshield, new parabolic external mirrors, redesigned Generation II linkage and clean hydraulic lines routing.
Automatic climate control with heated rear glass and external mirrors for a quick defrost.
Fully adjustable controls including steering column, joystick and seat suspension.
Information at a glance with large primary LCD display and optional full color touch screen display.
An extra eye on the job site with optional integrated rear object detection and optional* rearview camera.
A heated and cooled seat option for added comfort in a wide range of climates.

*Standard in Europe

Enjoy coming to work with:

A spacious, safe, quiet operator environment featuring ergonomic controls, seat belt notification and optional bluetooth radio with integrated microphone plus an MP3 port.
Easy access to vital machine parameters with the optional* secondary display that works in conjunction with the standard soft touch panel to allow real time adjustments to machine features and an integrated help button with over 25 languages.
Comfortable soft stops at cylinder end stroke conditions and programmed kick-out points with Caterpillar's exclusive electro-hydraulic cylinder snubbing.
An even smoother ride with optional Ride Control when working unloaded and loaded with excellent material retention.
Early starts and late finishes are made easier with optional LED lighting package that includes engine compartment lighting to illuminate the way for checking oil and coolant level, along with re-fueling the machine in dark conditions.

*Standard in Europe

Efficiently Powerful

Intelligent Power Management

The Caterpillar exclusive Intelligent Power Management system has been further enhanced to monitor operator input and power availability to keep the machine working at peak efficiency and provide the operator with greater customization to suit their application.

Power on Demand

A choice of Power Modes allows you to choose between maximum fuel efficiency or boosted power along with hydraulic speed.

Standard Power Mode

Saves up to 10% fuel compared to K Series Cat loader.
Delivers equal performance compared to K Series Cat Loader.
Reduces cab sound levels down to a whisper quiet 64 dB(A) typical.
Biggest gains seen during load and carry, snow removal and roading applications.

Performance Power Mode

Enabled at the push of a button (HP+).
Boosts engine power by up to 10% and engine speed by over 12%.
Increases hydraulic cycle times and productivity.

Six Cylinders of Efficient Power

The Cat C7.1 ACERT engine provides cleaner, quieter operation while delivering superior performance and durability through a high torque, low speed design. The engine meets Tier 4 Final and Stage IV emission standards with a Clean Emissions Module that is designed to manage itself so you can concentrate on your work.

No downtime for regeneration with a passive low temperature system that keeps you on the job.
Fit for Life Diesel Particulate Filter (DPF) that is designed to exceed the engine overhaul life.
Extended fluid fill intervals with minimal use of Diesel Exhaust Fluid (DEF) also referred to as Adblue™ with an average of four fuel tank fills per DEF fill.
Configurable auto idle shut down based on time and ambient temperature to further reduce fuel burn and keep operating costs low.
Spark arrestor performance as standard – Meets performance requirements of EN 1834-1.2000 (section 6.4.2 Visual Test).

Power to the Ground

Lock up and go with fully locking front differential axles that can be engaged on the move at full torque with a pull of the seat mounted joystick trigger. Maximize your traction with optional Limited Slip Differential on the rear axle to keep you climbing.

Independent service brakes on front and rear axles provide robust stopping performance while a push button electronic park brake allows you to safely secure the machine with ease.

Customize Your Experience

Work as one with your machine by customizing controls.

Flexible Power Train

A smooth, step-less electronically controlled hydrostatic transmission provides adjustable power to the ground with excellent groundspeed control and customizable feel.

Select your Power Train Mode:
– Torque Converter (TC) for smooth rollout.
– Hystat for aggressive engine braking.
– Ice to maximize control on snow and ice.
– Default blends the best of Hystat and Torque Converter characteristic.
Reduce tire wear using Rimpull control which enables you to match available tractive power to underfoot conditions.
Fine tune ground speed when using work tools such as brooms, snow blowers and brush cutters with Creeper Control.
Set Directional Shift Response, soft and smooth for material handling applications or sharp for aggressive operation.

Adjustable Electro-Hydraulic Controls

Easily customize hydraulic performance to meet your needs.

Optimize hydraulic modulation with Fine Mode control when working with forks, material handling arms, and large tools.
Quicker hydraulic response for fine grading at speed and agriculture applications through Lift and Tilt response settings.
Fully adjustable ride control activation speed along with 3rd and 4th function auxiliary flows.

Operator Profiles and Coded Start

The M Series Wheel Loaders will remember you and your personal settings with unique operator codes to make this machine truly yours and keep it secure.

Customer Support

Renowned Cat Dealer Support

Rely on your Cat dealer to help you every step of the way with new or used machine sales, rental or rebuild options to meet your business needs.

Maximize your machine uptime with unsurpassed worldwide parts availability, trained technicians and customer support agreements.

Let us earn your business. Experience an M Series Small Wheel Loader and join the Caterpillar family.

930M

930M

View Product Downloads

Equipment

930M Standard Equipment

930M Optional Equipment

Related Products

Attachments

Fusion™ Grading Bucket

General Purpose Buckets

Grapple

High Dump Buckets

Light Material Buckets

Sand & Gravel Buckets

Construction Forks

Sorting Grapple Forks

Material Handling Arms - Loader

Straight Snow Pushes

Specifications

Overview

Engine

Buckets

Weights

Cab

Air Conditioning System

Loader Hydraulic System

Operating Specifications

Power Train

Service Refill Capacities

Steering

Transmission

Benefits & Features

Configured for Success

Work Made Easy

Service

Enjoy All Day Comfort

Efficiently Powerful

Customize Your Experience

Customer Support

News & Events

Promotions

Social Media

Branch Locations

Services

Technology

Finance

This website is using cookies.

Please share your feedback on Finning.com!