930M Waste Handler Small Wheel Loader

Equipment

930M Waste Handler Standard Equipment

POWER TRAIN

Axle seal guards
Auto idle shut down feature
Cat® C7.1 engine:
– Power Modes (Standard and Performance)
– Power by Range (High Power in Range 4)
– Turbocharged and aftercooled
– Filtered crankcase breather
– Diesel particulate filter (Fit for Life)
Coolant protection to –34° C (–29° F)
Differential lock in front axle
Dry type air cleaner
Enclosed wet disc full hydraulic brakes
Fuel priming pump, automatic
Fuel water separator
Hydraulically driven demand cooling fan
Intelligent hydrostatic transmission:
– Power train modes
– Directional shift aggressiveness
– Rimpull control, adjust wheel torque
– Creeper control, adjust ground speed
Lubed for life driveshafts
Parking brake, electric
Wide spaced six fins per inch cooling package
S·O·SSM sampling ports
Throttle lock and maximum speed limiter

HYDRAULICS

Automatic lift, lower and tilt kickouts
Bucket and Fork Modes, adjustable in-cab
Cylinder damping at kickout and end stops
Fine Mode control in Fork Mode
Hydraulic response setting
Load sensing hydraulics and steering
Seat-mounted hydraulic joystick controls

ELECTRICAL

Alternator, 115-amp, heavy duty
12V power supply in cab (2)
Batteries, 1,000 CCA (2) 24 volt system
Back-up alarm
Emergency shutdown switch
Heavy duty gear reduction starter
Product Link PRO with trial subscription
Remote jump start post
Resettable main and critical function breakers

OPERATOR ENVIRONMENT

75 mm (3 in) retractable seat belt, with audible alarm and indicator
Automatic temperature control
Binder storage net
Cab, enclosed and pressurized
Cup holders
External heated mirrors with lower parabolic
Ground level cab door release
Gauges:
– Digital hour meter, odometer, tachometer, ground speed and direction indicator
– Engine coolant temperature gauge
– Fuel and Diesel Exhaust Fluid level
– Hydraulic oil temperature gauge
Hydraulic control lockout
Interior cab lighting, door and dome
Interior rearview mirrors (2)
Lunch box storage
Operator warning system indicators
Radio ready speakers
Rear window defrost, electric
Seat-mounted controls, adjustable
Sliding glass on the side windows
Column mounted multi function control – lights, wipers, turn signal
Suspension seat, fabric
Tilt and telescopic steering wheel
Wet arm wiper/washer, front and rear

OTHER STANDARD EQUIPMENT

Large-access enclosure doors
Parallel lift loader linkage
Recovery hitch with pin
Remote mounted lubrication points
Lockable compartments and enclosures

EU STANDARD EQUIPMENT

Cab, deluxe
Camera, rearview

930M Waste Handler Optional Equipment

OPTIONS

Antifreeze/coolant, extended-life
Auto lube, integrated in touch screen display
Auxiliary flow, third and fourth function
Axles, differential, limited slip, rear
Axles, elevated breathers
Beacon light, strobe
Cab, deluxe (standard in Europe):
– Automatic blower control
– Electrically adjustable heated mirrors (2)
– LED interior lighting
– Touch screen display
Ride control adjustable speed activation
Preventative maintenance reminders
Integrated help function (22 languages available)
Sunscreen, front and rear
Camera, rearview (standard in Europe)
Cat Production Measurement (CPM) – fully integrated scale system, with optional printer that can print up to three copies of the weigh ticket
Cold start package:
– Ether starting aid, block heater and additional batteries 1,000 CCA (four in total)
Coupler, (Fusion and ISO 23727)
Debris packages:
– Low – standard six fins per inch package
– Medium – reversing fan and Syklone precleaner
– High – adds a sealed alternator to medium package
Fenders (extended cover and full coverage)
Guards:
– Power train, (lower, side, driveshaft and crankcase)
– Windshield and lights
– Cylinders, tilt and steering
Lights, auxiliary, halogen or LED with engine compartment lights
Rear Object Detection
Radio packages:
– Radio ready with Bluetooth
– Radio, AM/FM with Bluetooth and clock
– Radio, AM/FM with CD player deluxe, weatherband, Bluetooth and clock
Seats:
– Deluxe seat – fully adjustable fabric air suspension seat with high seat backrest
– Premium seat – fully adjustable leather and fabric air suspension with high backrest and air lumbar support. Heated and cooled bottom cushion and backrest.
Steering:
– Dual mode and Secondary
Tires:
– Bias ply, 17.5, 20.5-25
– Radial, 17.5, 20.5, 23.5, 550/65, 600/65, 650/65 R25
Tire Pressure Monitoring (TPM) – fully integrated system with high and low pressure alerts
Toolbox – 0.03 m3 (1.2 ft3) of undercab storage
Work tools

Overview

The Cat® 930M Waste Handler sets a new standard for productivity, fuel efficiency and comfort. A high torque, low speed C7.1 engine works in concert with an intelligent hystat power train to deliver fuel efficiency as standard. A complete range of guarding and debris management solutions are available to meet the needs of the most demanding environments. Extremely low sound levels, large spacious cab and intuitive controls keep you working comfortably all day and even all night! Experience the new industry benchmark.

Engine

Buckets

Bucket Capacities 3.0-5.0 m3 (3.9-6.5 yd3) 3.0-5.0 m3 (3.9-6.5 yd3)

Weights

Operating Weight 33396.0 lb 15153.0 kg

Cab

ROPS ISO 3471: 2008 ISO 3471: 2008
FOPS ISO 3449: 2005 LEVEL II ISO 3449: 2005 LEVEL II
Declared Sound Levels - Exterior Sound Power Level (ISO 6395:2008)* 101.0 dB(A) 101.0 dB(A)
Declared Sound Levels - Operator Sound Pressure Level (ISO 6396:2008)* 68.0 dB(A) 68.0 dB(A)
Note (1) *Measurements were conducted at 70% of maximum engine cooling fan speed. Sound level may vary at different engine cooling fan speeds. The cab was properly installed and maintained. The measurements were conducted with the cab doors and the cab windows closed. *Measurements were conducted at 70% of maximum engine cooling fan speed. Sound level may vary at different engine cooling fan speeds. The cab was properly installed and maintained. The measurements were conducted with the cab doors and the cab windows closed.
Note (2) The Blue Angel environmental label is an optional attachment for Europe only. The Blue Angel environmental label is an optional attachment for Europe only.

Loader Hydraulic System

Operating Specifications

Full Turn Tip Load 18163.0 lb 8241.0 kg

Power Train

Brakes - Parking Spring applied hydraulically released Spring applied hydraulically released
Brakes - Service Inboard wet disc Inboard wet disc
Front Axle Fixed Fixed
Front Axle - Traction Aid* Locking differential (standard) Locking differential (standard)
Note (1) Power train is governed by the Caterpillar exclusive Intelligent Power Management system to deliver peak performance and efficiency. Power train is governed by the Caterpillar exclusive Intelligent Power Management system to deliver peak performance and efficiency.
Note (2) Offset rims available to meet European roading requirements. Offset rims available to meet European roading requirements.
Note (3) *Differential front locking axle can be engaged on the go at full torque to 10 km/h (6.2 mph) on the 930M. *Differential front locking axle can be engaged on the go at full torque to 10 km/h (6.2 mph) on the 930M.
Rear Axle Oscillating Oscillating
Rear Axle - Oscillation Angle by Tire Size - 20.5 R25, 550/65, 600/65, 650/65 ± 10.5 degrees ± 10.5 degrees
Rear Axle - Traction Aid - Optional Limited slip differential Limited slip differential

Service Refill Capacities

Cooling System 7.9 gal (US) 30.0 l
Diesel Exhaust Fluid (DEF) Tank 5.0 gal (US) 19.0 l
Engine Crankcase 5.3 gal (US) 20.0 l
Front Axles 6.9 gal (US) 26.0 l
Fuel Tank 51.5 gal (US) 195.0 l
Hydraulic System - Including Tank 43.6 gal (US) 165.0 l
Hydraulic Tank 23.8 gal (US) 90.0 l
Rear Axles 6.6 gal (US) 25.0 l
Transmission - Gear Box 2.2 gal (US) 8.5 l

Steering

Maximum Flow - Steering Pump 34.0 gal/min 130.0 l/min
Maximum Steering Torque - 0° (Straight Machine) 37155.0 ft·lbf 50375.0 N·m
Maximum Steering Torque - 40° (Full Turn) 27747.0 ft·lbf 37620.0 N·m
Maximum Working Pressure - Steering Pump 3500.0 psi 24130.0 kPa
Note (1) Steering system uses a dedicated load sensing variable displacement pump with dual double acting cylinders. Steering system uses a dedicated load sensing variable displacement pump with dual double acting cylinders.
Note (2) Flow values listed are for a machine running in Performance Power Mode (1,800 rpm). Flow values listed are for a machine running in Performance Power Mode (1,800 rpm).
Steering Cycle Times - Full Left to Full Right - Maximum RPM: 90 rpm Steering Wheel Speed 2.4 s 2.4 s
Steering Cycle Times - Full Left to Full Right - Minimum RPM: Pump Flow Limited 2.8 s 2.8 s
Steering Cylinder, Double Acting - Bore Diameter 2.8 in 70.0 mm
Steering Cylinder, Double Acting - Rod Diameter 1.6 in 40.0 mm
Steering Cylinder, Double Acting - Stroke 17.2 in 438.0 mm

Transmission

Forward and Reverse - Range 1* 1-13 km/h (0.6-8 mph) 1-13 km/h (0.6-8 mph)
Forward and Reverse - Range 2 8.0 mile/h 13.0 km/h
Forward and Reverse - Range 3 17.0 mile/h 27.0 km/h
Forward and Reverse - Range 4 25.0 mile/h 40.0 km/h
Note *Creeper control allows maximum speed range adjustability from 1 km/h (0.6 mph) to 13 km/h (8 mph) in Range 1 through the touch screen display when equipped. Factory default is 7 km/h (4.4 mph). *Creeper control allows maximum speed range adjustability from 1 km/h (0.6 mph) to 13 km/h (8 mph) in Range 1 through the touch screen display when equipped. Factory default is 7 km/h (4.4 mph).

Benefits & Features

Application Specific Configuration

See more

Guard Your Investment

Choose from a complete range of optional guarding to protect your machine from the harsh environment of a waste handling application. The machine guarding is purpose built to protect the machine's major components and systems to keep you on the job and maximize production rates.

Breathe Clean

Maximize your engine life and extend filter cleaning intervals with a turbine pre-cleaner. Keep cool with a reversing fan to purge the single plane, widely spaced core cooling package and brush-less sealed alternator. Breath clean with a powered RESPA system for the operator environment designed to eliminate 90% of the particulate in the air and filter the remaining 10%.

Maximize Tire Life

Fine tune your wheel torque to match the underfoot conditions and maximize performance while extending tire life. Cat Waste Handlers feature wheel torque adjustments through an exclusive Rimpull Control feature designed to keep your operating costs low.

Customize Your Experience

See more

Work as one with your machine by customizing the controls.

Flexible Power Train

A smooth, step-less electronically controlled hydrostatic transmission provides adjustable power to the ground with excellent groundspeed control and customizable feel.

Select your Power Train Mode:
- Torque Converter (TC) for smooth rollout.
- Hystat for aggressive engine braking.
- Default mode which blends the best of Hystat and Torque Converter characteristics.
Reduce tire wear using Rimpull control which enables you to match available tractive power to underfoot conditions
Set Directional Shift Response, soft and smooth for material handling applications or sharp for aggressive operation.

Adjustable Electro Hydraulic Controls

Easily customize the hydraulic performance through touch screen display to optimize your efficiency.

Optimize hydraulic modulation with Fine Mode control when working with forks.
Quicker Hydraulic response for fine grading at speed and quick functions through Lift and Tilt response settings.
Fully adjustable ride control activation speed along with 3rd function auxiliary flow for powering a roll out bucket.

Operator Profiles and Coded Start

The M Series Wheel Loaders will remember you and your personal settings with unique operator codes to make this machine truly yours and keep it secure on the job site.

Efficiently Powerful

See more

Power on Demand

A choice of Power Modes allows you to choose between maximum fuel efficiency or boosted power along with hydraulic speed to get your work done even quicker.

Standard Power Mode

Saves up to 10% fuel compared to previous K Series models while running at an efficient 1,600 rpm.
Recommended for load and carry to maximize fuel efficiency.
Power-by-range logic increases power in speed Range 4 automatically to maximize travel speed and grade climbing performance.
Reduces cab sound levels down to a whisper quiet 64 dB(A) typical.

Performance Power Mode

Enabled at the push of a button (HP+).
Boosts engine power by up to 10% in all speed ranges.
Boosts engine speed by over 12%.
Increases hydraulic cycle times and productivity.

Six Cylinders of Efficient Power

The Cat® C7.1 engine provides more efficient, quieter operation while delivering superior performance and durability through a high torque, low speed design. The engine meets U.S. EPA Tier 4 Final and EU Stage IV emission standards with a Clean Emissions Module that is designed to manage itself so you can concentrate on your work.

No downtime for regeneration with a passive low temperature system that keeps you on the job.
Fit for Life Diesel Particulate Filter that is designed to exceed the engine overhaul life.
Extended fluid fill intervals with minimal use of Diesel Exhaust Fluid (DEF) with up to four fuel tank fills per DEF fill.
Configurable auto idle shut down based on time and ambient temperature to further reduce fuel burn and keep operating costs low.
Spark arrester performance as standard – Meets the performance requirements of EN 1834-1.2000 (section 6.4.2 Visual Test)

Power to the Ground

Lock up and go with fully locking front differential axles that can be engaged on the move at full torque with the pull of a trigger on the seat mounted joystick. Maximize your traction with optional Limited Slip Differential on the rear axle to keep you climbing.

Independent service brakes on front and rear axles provide robust stopping performance while a push button electronic park brake allows you to safely secure the machine with ease.

Work Made Easy

See more

Optimized Z-bar Linkage

The Caterpillar patented optimized Z-bar linkage combines the digging efficiency of a traditional Z-bar with integrated tool carrier capabilities for great performance and versatility.

Perfect Parallelism functionality available in Fork Mode gives truly predictable performance while high tilt forces throughout the working range help you safely and confidently handle loads with precise control.
Visibility to bucket corners and fork tips at ground level remain excellent while sight lines at maximum lift are improved with a Generation II lift arm design.

Quick Loading, Performance Series Buckets

Performance Series Buckets deliver up to 10% higher fill factors and better material retention for significant productivity and fuel efficiency improvements. The buckets feature a longer floor to take a bigger bite of the pile, an open throat to heap higher and curved side bars to help with material retention. This optimized shape is echoed across the General Purpose, Light Material, and High Dump bucket families.

Smooth and Predictable Multi-Function Performance

M Series machines feature an electro-hydraulic control system that is governed by the Intelligent Power Management system for peak efficiency. The load-sensing, variable flow system senses work demand and adjusts flow and pressure to match the operators request.

Multi-Function without compromise through Caterpillar's exclusive dedicated hydraulic systems featuring three pumps:
- 1st pump for Intelligent Hydrostatic drive
- 2nd pump for implements
- 3rd pump for steering system

Drive, Lift and Steer simultaneously with smooth predictable control. The M Series simply does what you ask it to.

Programmable in-cab kick-outs are easy to set on the go for tilt, lower and lift. This feature is ideal for applications where the work cycle is repeatable allowing you to quickly return to programed set points such as ground and level.
Fine tune hydro-mechanical performance with fully adjustable 3rd function flow through the touch screen display (when equipped) for a perfect marriage between machine and attachments.

Enjoy All Day Comfort

See more

Have a Seat and Experience:

Seat-mounted controls featuring a low effort joystick for lift and tilt functions along with integrated Forward/Neutral/Reverse switch, differential lock trigger and optional third and fourth auxiliary functions.
Superior all around visibility with single piece front windshield, new parabolic external mirrors, redesigned Generation II linkage and clean hydraulic lines routing.
Automatic climate control with heated rear glass and external mirrors for a quick defrost.
Fully adjustable controls including steering column, joystick and seat suspension.
Information at a glance with large primary LCD display and optional full color touch screen display.
An extra eye on the job site with optional integrated rear object detection and optional* rearview camera.
A heated and cooled seat option for added comfort in a wide range of climates.

*Standard in Europe.

An easy day at work with:

A spacious, safe, quiet operator environment featuring ergonomic controls, seat belt notification and optional Bluetooth™ radio with integrated microphone plus an auxiliary port.
Easy access to vital machine parameters with the optional touch screen display that works in conjunction with the standard soft touch panel to allow real time adjustments to machine features and an integrated help button with over 25 languages.
Comfortable soft stops at cylinder end stroke conditions and programmable kickout points with Caterpillar's exclusive electro-hydraulic cylinder snubbing.
An even smoother ride with optional Ride Control when working unloaded and loaded with excellent material retention.
Early starts and late finishes are made easier with optional LED lighting package that includes engine compartment lighting to illuminate the way for checking oil, and coolant level along with refueling the machine in dark conditions.

Configured for Success

See more

The Way You Want It

A complete range of optional equipment and work tools gives you the versatility to configure a Waste Handler to be successful in your business. Get with your Caterpillar dealer to configure yours.

Guards:

Windshield
Tilt cylinder
Lights
Fender deflectors
Drive shaft
Hitch
Steering cylinders
Side power train
Lower power train
Crank case
Rear radiator

Debris Packages:

Reversing fan
Sealed alternator
Turbine precleaner
RESPA precleaner

Work Tools:

Full range of tools

Operator Environment:

Seat, deluxe or premium
Deluxe cab (with touch screen display)

Other Options:

Autolube
High lift linkage
Coupler: Fusion™ and ISO 23727
Auxiliary hydraulics: 3rd and 4th
Window washing access
Ride control
Fenders: extended and full coverage
Counterweights
Cold start package
Rear object detection
Blue Angel certification
Beacon
LED auxiliary lights
CPM – Cat Production Measurement
TPM – Tire Pressure Monitoring

Serviceability

See more

Get up and running quickly with ground level, daily service access and optional engine compartment lighting. Three large service doors can be opened and closed in any order to give full access to filters and service points. Extended service intervals on hydraulic and power train filters reduce service time and maximize uptime. Additional service features include:

Product Link™ PRO standard with a trial subscription to VisionLink®.
Maintenance reminders through touch screen display at scheduled intervals.
Fit for Life Diesel Particulate Filter that is designed to exceed the engine overhaul life.
Quick fuel filter service with Caterpillar's exclusive electric fuel priming pump.
Jump start studs as standard equipment.
Extended cleanouts with single plane cooling system and wide spaced six fins per inch coolers as standard.
Integrated Autolube (optional) with adjustable greasing frequency.

Customer Support

See more

Renowned Cat Dealer Support

Rely on your Cat dealer to help you every step of the way with new or used machine sales, rental or rebuild options to meet your business needs.

Maximize your machine uptime with unsurpassed worldwide parts availability, trained technicians and customer support agreements.

Let us earn your business. Experience an M Series Small Wheel Loader and join the Caterpillar family.

930M Waste Handler

930M Waste Handler

View Product Downloads

Equipment

930M Waste Handler Standard Equipment

930M Waste Handler Optional Equipment

Specifications

Overview

Engine

Buckets

Weights

Cab

Loader Hydraulic System

Operating Specifications

Power Train

Service Refill Capacities

Steering

Transmission

Benefits & Features

Application Specific Configuration

See more

Guard Your Investment

Breathe Clean

Maximize Tire Life

Customize Your Experience

See more

Flexible Power Train

Adjustable Electro Hydraulic Controls

Operator Profiles and Coded Start

Efficiently Powerful

See more

Power on Demand

Standard Power Mode

Performance Power Mode

Six Cylinders of Efficient Power

Power to the Ground

Work Made Easy

See more

Optimized Z-bar Linkage

Quick Loading, Performance Series Buckets

Smooth and Predictable Multi-Function Performance

Enjoy All Day Comfort

See more

Have a Seat and Experience:

An easy day at work with:

Configured for Success

See more

The Way You Want It

Guards:

Debris Packages:

Work Tools:

Operator Environment:

Other Options:

Serviceability

See more

Customer Support

See more

Renowned Cat Dealer Support

Related Products

Attachments

News & Events

Promotions

Social Media

Branch Locations

Services

Technology

Finance