Cat C32 Generator Set (US EPA Tier 3 / IMO II)

Benefits & Features

Equipment

Specifications

SCAC

Separate-circuit aftercooling – no sea water in aftercooler

Fuel System

Reliable electronic controlled unit injector fuel system. Enhanced control of fuel injection optimized through crank timing and A4 ECM technology. Advanced combustion technology to optimize fuel consumption and meet emissions without aftertreatment.

Power Reserve

Industry leading power reserve

Certifications

Wide range of available Marine Society certifications

Warranty

Industry-leading warranty coverage for factory packaged components

Service

Global dealer network for service in any location

C32 Tier 3 / IMO II Standard Equipment

AIR INLET SYSTEM

Separate circuit aftercooled (SCAC)

CONTROL SYSTEM

24V control system

COOLING SYSTEM

Heat exchanger, keel or radiator cooled

Watercooled exhaust manifold and turbocharger

Hard seawater lines – no flexible hoses

Flanges for cooling connections, ANSI or DIN

FUEL SYSTEM

Duplex fuel filters with hybrid fuel lines

Fuel transfer and priming pump

GENERATORS AND GENERATOR ATTACHMENTS

IP23, air cooled, form wound SR5 generator offered in 440, 480 and 690V

LUBE SYSTEM

Oil fill, simplex filter and dipstick

MOUNTING SYSTEM

Helical spring/rubber isolated mounting for vibration and structure borne noise reduction

GENERAL

Right or left hand service sides

Customer wiring and service tool connector

C32 Tier 3 / IMO II Optional Equipment

AIR INLET SYSTEM

Closed crankcase ventilation

ALARM AND PROTECTION

MGCP II or MGCP IIIB control panel with Cat® alarm and protection system

IP44 generator protection

EXHAUST SYSTEM

Muffler

SOLAS approved spray shielding

CHARGING SYSTEM

Charging alternator

CONTROL SYSTEM

EMCP 4.2 control panel

FUEL SYSTEM

Installed primary fuel filter with water separator and manual or electric priming pump

Fuel cooler

LUBE SYSTEM

Duplex oil filters

STARTING SYSTEM

Starting motors – air, electric or dual

Cat C32 Generator Set (US EPA Tier 3 / IMO II)

Compare Models

US
Metric

Generator Set Specifications

Minimum Rating 219 ekW 219 ekW

Maximum Rating 940 ekW 940 ekW

Frequency 60hz 60hz

Engine Specifications

Configuration Vee-12, 4-stroke-Cycle-Diesel Vee-12, 4-stroke-Cycle-Diesel

Aspiration Turbocharged-aftercooled aspiration Turbocharged-aftercooled aspiration

Bore 5.71 in 145.0 mm

Stroke 6.38 in 162.0 mm

Displacement 1959.0 in³ 32.1 l

Emissions U.S. EPA Tier 3 / IMO II emissions certified U.S. EPA Tier 3 / IMO II emissions certified

Rated Engine Speed 1800 rpm 1800 rpm

Governor Electronic (A4 ECM) Electronic (A4 ECM)

Generator SR5 - Form Wound SR5 - Form Wound

Refill Capacity Lube Oil System w/ oil filter change: 146 L (38.5 gal) Lube Oil System w/ oil filter change: 146 L (38.5 gal)

Cooling Heat exchanger, keel or radiator cooled Heat exchanger, keel or radiator cooled

Oil Change Interval 750 hrs 750 hrs

Generator Set Dimensions

Length 167.2 in/4245 mm (minimum), 226.1 in/5742 mm (maximum) 167.2 in/4245 mm (minimum), 226.1 in/5742 mm (maximum)

Width 59.9 in/1521 mm (minimum), 89.8 in/2280 mm (maximum) 59.9 in/1521 mm (minimum), 89.8 in/2280 mm (maximum)

Height 70.4 in/1747 mm (minimum), 92.8 in/2356 mm (maximum) 70.4 in/1747 mm (minimum), 92.8 in/2356 mm (maximum)

Package Dry Weight 15721 lb/7131 kg (minimum), 21998 lb/9978 kg (maximum) 15721 lb/7131 kg (minimum), 21998 lb/9978 kg (maximum)

C32 Tier 3 / IMO II