The Cat® 725 features a world-class cab design, re-engineered using global operator feedback to advance comfort and ease of operation. Enhancements include new controls, transmission-protection features, hoist-assist system, advanced automatic traction control system, automatic retarder control, stability-assist machine rollover warning system, and a fuel saving ECO mode.
Engine
Engine Model
Cat C9.3
Cat C9.3
Bore
4.5 in
115.0 mm
Stroke
45.2 in
1149.0 mm
Displacement
567.5 in³
9.3 l
Peak Engine Torque Gross (SAE J1995)
1275.0 ft·lbf
1729.0 N·m
Gross Power - SAE J1995
342.0 HP
255.0 kW
Net Power - ISO 14396
338.0 HP
252.0 kW
Engine Model - U.S. EPA Tier 4 Final/EU Stage IV
Cat® C9.3
Cat® C9.3
No Engine De-rating Below
3000.0 ft
914.0 m
Peak Engine Torque Net (SAE J1349)
1263.0 ft·lbf
1712.0 N·m
Net Power - SAE J1349
334.0 HP
249.0 kW
Peak Engine Torque Speed
1200.0 r/min
1200.0 r/min
Note (1)
The power ratings apply at rated speed of 1,700 rpm when tested under the conditions for the specified standard.
The power ratings apply at rated speed of 1,700 rpm when tested under the conditions for the specified standard.
Emissions
The reference to Tier 4 Final/Stage IV includes U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 (Tier 4 Final), as well as Korea Tier 4 Final emission standards.
The reference to Tier 4 Final/Stage IV includes U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 (Tier 4 Final), as well as Korea Tier 4 Final emission standards.
Note (3)
Net power when the fan is at maximum speed is 249 kW (334 hp) per the SAE reference conditions.
Net power when the fan is at maximum speed is 249 kW (334 hp) per the SAE reference conditions.
Note (2)
The net power advertised is the power available at the flywheel when the engine is equipped with alternator, air cleaner, muffler and fan at minimum speed.
The net power advertised is the power available at the flywheel when the engine is equipped with alternator, air cleaner, muffler and fan at minimum speed.
Note (4)
DEF used in Cat SCR systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1. ISO 22241-1 requirements are met by many brands of DEF, including those that carry the AdBlue or API certifications.
DEF used in Cat SCR systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1. ISO 22241-1 requirements are met by many brands of DEF, including those that carry the AdBlue or API certifications.
Weights
Rated Payload
26.5 ton (US)
24.0 t
Body Capacities
Heaped (SAE 2:1)
19.6 yd³
15.0 m³
Struck
14.4 yd³
11.0 m³
Tailgate Heaped SAE 2:1
20.4 yd³
15.6 m³
Tailgate Struck
14.5 yd³
11.1 m³
Transmission
Forward - 1
5.0 mT/hr
8.1 km/h
Forward - 2
9.4 mT/hr
15.2 km/h
Forward - 3
14.4 mT/hr
23.2 km/h
Forward - 4
22.1 mT/hr
35.5 km/h
Forward - 5
30.7 mT/hr
49.4 km/h
Forward - 6
36.3 mT/hr
58.4 km/h
Reverse - 1
5.5 mT/hr
8.9 km/h
Sound Levels
Interior Cab
69.0 dB(A)
69.0 dB(A)
Note (1)
The declared dynamic operator sound pressure level is 69±2 dB(A) when "ISO 6396:2008" is used to measure the value for an enclosed cab. The measurement was conducted at 70% of the maximum cooling fans speed. The sound level may vary at different cooling fan speeds. The measurement was conducted with the cab doors and the cab windows closed. The cab was properly installed and maintained.
The declared dynamic operator sound pressure level is 69±2 dB(A) when "ISO 6396:2008" is used to measure the value for an enclosed cab. The measurement was conducted at 70% of the maximum cooling fans speed. The sound level may vary at different cooling fan speeds. The measurement was conducted with the cab doors and the cab windows closed. The cab was properly installed and maintained.
Note (2)
Hearing protection may be needed when operating with an open operator station and cab (when not properly maintained or doors/windows open) for extended periods or in noisy environments.
Hearing protection may be needed when operating with an open operator station and cab (when not properly maintained or doors/windows open) for extended periods or in noisy environments.
Operating Weights
Total - Loaded
103886.0 lb
47122.0 kg
Rear Axle - Rated Load
23699.0 lb
10750.0 kg
Total - Empty
50975.0 lb
23122.0 kg
Total - Rated Load
52910.0 lb
24000.0 kg
Center Axle - Loaded
33944.0 lb
15397.0 kg
Front Axle - Rated Load
5511.0 lb
2500.0 kg
Center Axle - Rated Load
23699.0 lb
10750.0 kg
Center Axle - Empty
10242.0 lb
4646.0 kg
Rear Axle - Loaded
33457.0 lb
15176.0 kg
Front Axle - Loaded
36484.0 lb
16549.0 kg
Rear Axle - Empty
9757.0 lb
4426.0 kg
Front Axle - Empty
30974.0 lb
14050.0 kg
Body Plate Thickness
Side Plates
0.43 in
11.0 mm
Front Plate
0.28 in
7.0 mm
Base Plate
0.51 in
13.0 mm
Service Refill Capacities
Fuel Tank
91.0 gal (US)
412.0 l
Cooling System
18.0 gal (US)
83.0 l
Hydraulic System
29.1 gal (US)
110.0 l
Engine Crankcase
8.0 gal (US)
38.0 l
Transmission
10.0 gal (US)
47.0 l
Final Drives/Differential
33.0 gal (US)
125.0 l
Output Transfer Gear Box
5.0 gal (US)
24.0 l
DEF Tank
4.0 gal (US)
20.0 l
Steering/Hoist Hydraulic System
24.0 gal (US)
110.0 l
Final Drive - Each
1.6 gal (US)
7.5 l
Body Hoist
Raise Time
10.0 s
10.0 s
Lower Time
8.0 s
8.0 s
Steering
Lock to Lock
4.75 seconds @ 60 rpm
4.75 seconds @ 60 rpm
Standards
Brakes
ISO 3450 – 2011
ISO 3450 – 2011
Cab - FOPS
ISO 3449 Level II – 2008
ISO 3449 Level II – 2008
Cab - ROPS
ISO 3471 – 2008
ISO 3471 – 2008
Steering
ISO 5010 – 2007
ISO 5010 – 2007
Body Plate
Type
High strength Brinell HB450 wear resistant steel
High strength Brinell HB450 wear resistant steel
Turning Circle
Turning Dimensions - Inside Radius
153.0 in
3879.0 mm
Turning Dimensions - Aisle Width
210.0 in
5332.0 mm
Turning Dimensions - SAE Turning Radius
294.0 in
7470.0 mm
Turning Dimensions - Clearance Radius
318.0 in
8075.0 mm
Turning Dimensions - Steer Angle - Left/Right
45°
45°
Note
Dimensions are for machines equipped with 23.5R25 tires.
Dimensions are for machines equipped with 23.5R25 tires.
Optimal Loader/Truck Pass Matching
Wheel Loader: 950M - Passes
5
5
Wheel Loader: 962M - Passes
4-5
4-5
Wheel Loaders: 966M/966M XE - Passes
4
4
Hydraulic Excavators: 336F/336F XE - Passes
5-6
5-6
Wheel Loaders: 972M/972M XE - Passes
3-4
3-4
Hydraulic Excavators: 349F/349F XE - Passes
4-5
4-5